Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Gladeview, FL
Hacienda Gate Repair is a dedicated gate company serving Gladeview, FL, and the 33147 ZIP code. We focus exclusively on gates, which means every Gladeview job gets a technician who understands Miami-Dade wind-load anchoring, salt-corrosion cycles, and the mid-century concrete-block construction that defines this unincorporated pocket of northwest Miami-Dade. Gate installation here almost always means working with stucco columns that have shifted, metal posts that have corroded at the base, or driveways that have settled unevenly. Call (855) 362-1433 for a free estimate on any gate job in Gladeview.
Why Gladeview Homes Are Different
Gladeview is an unincorporated area of northwest Miami-Dade covering ZIP 33147, mostly built between the 1950s and 1970s. The housing stock is predominantly single-family concrete block with stucco walls, flat or low-pitch roofs, and attached carports or driveways. What that means for gate work is specific: gates are mounted to block and stucco columns or metal posts, not to HOA-standard framing. Those columns settle and crack unevenly in the sandy, high-water-table soil common across Gladeview, so a gate that looks like it simply needs a hinge adjustment often has a column that has moved. That changes how we approach nearly every installation and repair.
Climate is the other factor. Gladeview sits in a known high-wind zone under Miami-Dade’s unincorporated-area code, with hurricane-season wind loads, heavy summer rain, intense UV, and salt air from the coast. Steel hardware rusts fast here. Hinges seize. Gate operators corrode at the terminals. And post-hurricane code means any replacement gate must meet high-wind anchoring standards, which we check before we touch the hardware. Many Gladeview properties also have multiple gates on one lot, a driveway gate, a side-yard gate, and a rear-alley access gate. That multiplies hardware wear and makes a dedicated gate specialist more useful than a generalist who occasionally hangs a gate.
Styles & brands we work with
Our Main Gladeview Services
Most Gladeview homeowners call us for one of two things: a gate that has stopped working mechanically, or an electric gate that has stopped responding to its operator. Here is how each works in this area.
Gate Repair in Gladeview
A gate in Gladeview that drags, sags, or will not latch is usually dealing with one of three local conditions: a stucco column that has shifted, a steel hinge corroded by salt air and humidity, or a latch that has warped out of alignment after a wet season. We rebuild the mounting points, replace or re-galvanize the hardware, and re-set the gate so it swings true. Because we are a pure-play gate company, we work on the structure and the hardware in one visit, and we are equally comfortable with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule when an operator is involved. Read the full breakdown at Gate Repair in Gladeview.
Electric Gate Repair in Gladeview
Electric gates in Gladeview fail differently than in drier markets. Salt air corrodes control board terminals. Lightning and storm surges take out circuit boards. Humidity gets into limit switches and photocells. We diagnose the operator itself, check the wiring path between the operator and the gate, and confirm the gate’s mechanical movement is not overloading the motor. Because we service nine operator brands, we identify the actual fault rather than pushing a replacement. For a full look at how we handle automation systems, see Electric Gate Repair in Gladeview.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Gladeview
Gate installation in Gladeview means building for a gate that will outlast the next hurricane season and the one after that. Most homes here were built in the 1950s to 1970s, so we are usually working with existing concrete-block columns that have cracked or settled, or with metal posts that have rusted at grade. We set new hardware to Miami-Dade high-wind anchoring standards, choose corrosion-resistant hinges and latches suited to the salt air, and size the gate to the driveway and the operator you are planning to use now or later. For a full discussion of our installation process, visit Gate Installation.
Automatic Gate Installation
Signs you need it
You are opening and closing the gate by hand multiple times a day, or you need controlled access for tenants, deliveries, or a rear-alley entrance.
What it costs in Gladeview
Automatic gate installation in Gladeview typically runs between $2,800 and $7,500, depending on whether we are adding an operator to an existing gate or building a new automated system from scratch.
How we do it
We survey the driveway and columns, check the high-wind anchoring and permit status, install the gate and operator, and program the remote and safety features, including entrapment sensors and manual release.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through at the hinges, sagging into the drive, or the columns have cracked enough that the gate no longer latches.
What it costs in Gladeview
Driveway gate installation in Gladeview typically runs from $1,800 to $5,500, with ornamental and custom steel work at the higher end of that range.
How we do it
We remove the old gate, inspect and anchor the columns, hang the new gate on corrosion-resistant hinges, and set the latch and stops so the gate closes square against the Gladeview wind loads.
What Gate Installation Costs in Gladeview
| Item | Typical range in Gladeview |
|---|---|
| Automatic gate installation | $2,800 – $7,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $3,000 – $8,000 |
Does Gate Installation in Gladeview require a permit?
Often yes. Miami-Dade’s unincorporated-area code applies to Gladeview, and any new gate that involves a concrete footing or column work typically requires a permit. We check the permit status on every installation and, where a permit is required, we will note that before we begin work so there are no surprises.
Can you replace just the gate and keep the existing operator?
In most cases, yes. If the operator is a current LiftMaster, FAAC, BFT, or Linear model and the gate weight and dimensions stay within the operator’s rating, we can hang a new gate on the existing automation. We will confirm that during the site survey and quote before any work starts.
Brands We Service in Gladeview
We work on FAAC, BFT, Linear, and Viking operator systems, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we carry common Gladeview parts and can source brand-specific boards quickly, most operator repairs do not wait on a long parts delay. View our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Gladeview, FL
| Service | Typical range in Gladeview |
|---|---|
| Gate repair | $150 – $600 |
| Electric gate repair | $200 – $900 |
| Automatic gate installation | $2,800 – $7,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $3,000 – $8,000 |
| Gate operator replacement | $700 – $1,800 |
| Gate hinge replacement | $200 – $500 |
| Gate latch and lock replacement | $150 – $400 |
| Gate operator repair | $250 – $800 |
What pushes price up in Gladeview is usually the column. If the stucco or block column has cracked or shifted, we have to re-set or reinforce it before the gate can be installed or repaired, and that adds labor and material. The second factor is corrosion, when salt air has eaten the steel, the repair may mean replacing the hinge, the post, or the gate frame rather than just adjusting it. Every price is quoted and agreed before any work starts, so you know the number before we touch the gate.
Neighborhoods We Serve in Gladeview
We cover all of Gladeview’s 33147 ZIP code, including the residential streets west of NW 17th Avenue and the pockets east toward Liberty City and north toward the expressway. Because most of the housing is single-family and small multi-family rather than large gated communities, our technicians can typically route through Gladeview within the same day for urgent gate failures.
- Northwest Gladeview, near NW 79th Street
- North Central Gladeview, around NW 71st Street
- South Gladeview, near the NW 62nd Street corridor
- Eastern Gladeview, along NW 12th and 17th Avenues
- Westmoor and the blocks west of NW 22nd Avenue
Service Area – Cities Near Gladeview
Hacienda Gate Repair serves Gladeview from Hollywood, FL, and covers the surrounding Miami-Dade communities. If you are just outside Gladeview, you may be in one of our nearby service areas: West Little River, FL, El Portal, FL, Pinewood, FL, or Westview, FL. If you are unsure which area you are in, call and we will route you correctly.
Serving Gladeview, FL — Our Local Coverage Area
We’re based in the Gladeview area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gladeview
For urgent gate failures, especially a security gate that will not close or an electric gate that has failed open, we route technicians through Gladeview on the same day in most cases. Call (855) 362-1433 and describe the failure, and we will give you a realistic arrival window before you commit.
Yes. Many Gladeview homes have a driveway gate, a side-yard gate, and a rear-alley gate on the same property, and we service all of them in one visit where possible. That is useful because the same corrosion and column settlement problems usually affect every gate on the lot at once.
Yes. Gladeview is in a known high-wind zone under Miami-Dade’s unincorporated-area code, and we check anchoring and permit status before replacing a gate or its columns. We will not install a gate that does not meet the wind-load requirements for the area.
Call Hacienda Gate Repair at (855) 362-1433 for a free estimate on any gate repair, electric gate repair, or new gate installation in Gladeview. We serve the entire 33147 ZIP code, and we will quote a firm price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gladeview Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Ryan Quinn"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Mendoza"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniela Garcia