Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Hollywood Homeowners
When a gate stops working in Hollywood, it’s rarely a small inconvenience. A stuck driveway gate traps your car on one side of it. A sliding gate that jumps its track becomes a safety hazard for kids, pets, and delivery drivers. And an electric gate that won’t close leaves your property open overnight. Hacienda Gate Repair handles these problems every day across Hollywood, FL. We’re a dedicated gate repair company, not a generalist contractor, and our technicians carry working knowledge of nine major operator brands that matter in this market. Call (855) 362-1433 when your gate won’t open, won’t close, or won’t stop.
Key Takeaways:
- Hacienda Gate Repair services electric and manual gates, swing and slide systems, and the automation that powers them.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operator brands.
- Brand-agnostic diagnostics: we identify the right fix for your brand, not the one we prefer to sell.
- One call covers the gate structure and the operator, so you’re not coordinating between a fence company and an electrician.
- Free estimates with the price quoted and agreed before any work starts.
Driveway Gate Repair
Driveway gate repair in Hollywood typically ranges from $200 to $650 depending on whether the problem is mechanical, electrical, or structural, and you can learn more about Gate Repair pricing to understand what drives these costs. A gate off its hinges or sagging on a post is different from an operator that runs but won’t move the gate. We diagnose both. The most common calls we get in Hollywood are gates that grind against the driveway, swing arms that have come loose, and operators that hum but don’t engage. Hacienda Gate Repair addresses these as a pure-play gate specialist, meaning our entire service day is gates, every time.
Swing Gate Mechanical Repair
Most residential driveway gates in Hollywood are swing gates, and they fail in predictable ways. Hinges wear, posts shift in the sandy soil, and the gate panel itself starts dragging. Our technicians reset posts, rebuild hinge points, and realign the gate so it clears the driveway with even spacing on both sides.
Operator and Motor Service
If the gate moves by hand but won’t respond to the remote or keypad, the issue is likely in the operator, as explained in The Complete Gate Repair Guide for Hollywood Homeowners. We service Viking and Linear residential operators frequently in this area, along with several other brands. Repair work covers limit switches, control boards, capacitor failures, and receiver modules. Roland Vega makes a point of testing the operator under load, not just on the bench, because many Hollywood gates bind only when moving under their own power.
Styles & brands we work with
Gate Welding
Gate welding in Hollywood is the right fix when structural metal breaks, separates, or fatigues. A cracked weld on a gate frame or hinge plate isn’t something a set of bolts can fix properly. Hacienda Gate Repair performs on-site steel and aluminum welding for gate frames, hinge brackets, decorative pickets, and slide gate assemblies. Repairs of this type usually start around $250 for a localized crack and can run up to $800 or more when multiple sections need gusseting or reinforcing.
Frame and Hinge Reinforcement
Where a gate frame has cracked through at a hinge point or a corner joint has separated, we take the gate down and re-weld the joint with proper penetration, not just a surface bead. After welding, we gusset the repaired area when the failure pattern suggests recurring stress. That’s the kind of fix that keeps a gate from breaking again in the same spot.
Decorative and Picket Repairs
Wrought iron and steel gates lose pickets, scrolls, and finials over time, especially near busy Hollywood streets where vibration and salt air work on metal. We weld replacement elements to match existing spacing and finish, then prep the area for painting or touch-up. This gets the gate back to looking like it originally did, not like it had a patch job.
Commercial Gate Repair
Commercial gate repair in Hollywood covers automated entry systems at apartment buildings, office parks, storage facilities, HOA gatehouses, and industrial lots. These are high-cycle systems where downtime creates immediate problems, so we prioritize service for property managers and facilities teams. On most commercial systems in Hollywood, repairs run between $400 and $1,500 depending on operator size, parts availability, and whether the problem is in the operator, the safety loop, or the access control system.
Operator Replacement and Retrofit
When a commercial operator is beyond a worthwhile repair, we quote a replacement that matches the gate’s duty cycle, drawing on guidance from Choosing the Right Gate Repair Brand: A Buyer’s Guide for Hollywood. A FAAC or BFT unit on a property with hundreds of daily cycles gets a different recommendation than a light-duty residential operator that someone installed on a commercial gate. We quote the right class of operator for the actual traffic, not just whatever is cheapest to install.
Access Control Integration
Most commercial gates in Hollywood are tied into telephone entry systems, keypads, card readers, or vehicle detection loops. When the gate won’t open from a call box but works fine from the keypad, the problem is in the access control wiring or configuration, not the gate itself. Hacienda Gate Repair traces signal wiring, tests loop detectors, and verifies relay outputs so the entire entry system works as one unit.
Iron Gate Repair
Iron gate repair in Hollywood means working with solid iron, which is heavier than steel tubing and behaves differently under stress. Iron gates hold up well in South Florida’s climate if they’re maintained, but they rust, sag, and crack like any ferrous metal. Repairs generally run from $250 for minor hinge work to $1,000 or more for a full reset with welding and reinforcement. Hacienda Gate Repair handles both the structural welding and the alignment work that keeps an iron gate swinging smoothly.
Sag Correction and Hinge Rebuilding
Heavy iron gates put immense load on their hinge posts. After years of South Florida humidity and rain, posts lean and the gate drops at the latch side. We reset posts in new concrete where needed, rebuild hinge barrels, and realign the gate panel so the latch engages without lifting or forcing it.
Rust and Corrosion Repair
Iron gates near canal-front properties in Hollywood deal with more salt than inland homes, and that shows up as rust on the bottom rail and hinge areas first. We grind out rusted sections, weld in new material where metal loss has gone too far, and prep the repaired area so primer and paint will actually adhere. A rust repair that skips surface prep is a repair that won’t last a season.
Sliding Gate Repair
Sliding gate repair in Hollywood generally costs between $300 and $900 depending on whether the problem is mechanical or electrical. A cantilever slide gate that jumps its guide rollers is a mechanical fix. A slide gate that won’t move at all is often an operator, safety loop, or control board issue. Hacienda Gate Repair works on both types of failure because we service the gate structure and the automation as one system.
Track and Roller Alignment
In Hollywood, sliding gates pick up sand and debris from driveways and road shoulders, which accelerates roller wear and throws the gate out of level. We replace guide rollers, shim the track, and adjust the gate so it moves without dragging or grinding. On cantilever style gates we inspect the counterbalance frame, which is where structural failures hide.
Operator and Limit Switch Service
When a slide gate opens halfway and stops, or travels too far and slams against the end post, the limit switch settings are often the culprit. We set and test limit travel on every brand we service, including LiftMaster and DoorKing slide operators that are common in Hollywood’s larger properties. We also check the safety reversing mechanism after any limit adjustment, because a slide gate that doesn’t reverse on contact is a serious hazard.
Wrought Iron Gate Repair
Wrought iron gate repair in Hollywood is a frequent call for homes built with decorative ironwork, which is common across older Hollywood neighborhoods and newer construction alike. These gates combine ornamental elements with functional structure, so repairs need to do two things at once: look right and hold up. Pricing typically lands between $250 and $700 for common repairs, with larger structural jobs running higher.
Scroll and Finial Replacement
Ornamental elements like scrolls, finials, and rosettes break off from impacts, corrosion, or just age. We fabricate replacement pieces that match the existing pattern as closely as practical and weld them in place. On Hollywood homes with custom ironwork, that means matching proportions and spacing so the repaired section doesn’t stand out.
Structural Welding on Decorative Gates
Wrought iron gates often look heavy but carry their load through a relatively thin frame. When that frame cracks, the whole panel flexes and the ornament starts popping off. We weld the frame back to full strength, add reinforcement where the original design undersized the structure, and realign the gate before it goes back on its hinges.
Metal Gate Repair
Metal gate repair in Hollywood covers steel, aluminum, and iron gates of all types, from simple driveway gates to complex automated entry systems. Prices typically start around $200 for basic hinge and alignment work, with more involved repairs running up to $800 or higher when welding, post replacement, or operator service is required. Hacienda Gate Repair brings the same set of skills to every metal gate call: structural assessment, welding, alignment, and automation diagnostics when the gate is motorized.
Steel Frame Straightening
When a vehicle strikes a metal gate, even at low speed, the frame rarely survives perfectly straight. We assess whether the frame can be straightened in place or needs to come down for a jig-based correction. The goal is a gate that hangs square, latches cleanly, and doesn’t bind its operator against a bent section mid-travel.
Aluminum Gate Repairs
Aluminum gates resist rust, which is why they’re popular in Hollywood’s coastal zones, but they crack at welded joints and bend more easily than steel. We weld aluminum gate frames using the right alloy and filler, not a generic spool, so the repair holds. Where the gate has been struck, we also check the operator’s gearbox for shock damage.
Wood Gate Repair
Wood gate repair in Hollywood runs from $180 for a simple hinge replacement up to $650 for structural work that involves rebuilding a frame or resetting a post. Wood gates fail in predictable ways in South Florida: hinge screws pull out of softened wood, posts rot below grade, and frames rack out of square from humidity cycles. Hacienda Gate Repair fixes the structure and, when a wood gate carries an electric operator, we check the automation side too.
Post Rot and Replacement
Wood gate posts in Hollywood rot at ground level, where sprinkler overspray and constant moisture do their work. We pull the rotted post, set a new pressure-treated or cedar post in concrete, and re-hang the gate at the right height and swing. A gate that immediately starts sagging after a post replacement was either set wrong or hung on a bad hinge layout.
Frame Racking and Hardware Upgrades
Over time, wood gates lose their square shape. The latch side drops, the diagonal brace pulls loose, and the gate starts dragging. We rebuild the frame, replace the diagonal brace, and upgrade hinges and latch hardware so the gate carries its weight the way it’s supposed to. On motorized wood gates, we then verify the operator isn’t fighting an out-of-balance panel.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Hacienda Gate Repair carries certified working knowledge of nine gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters for Hollywood homeowners because no single brand dominates every property type here. A home in Emerald Hills may run a LiftMaster swing operator, while a condo building two blocks away uses FAAC or BFT on a commercial slide gate.
Roland Vega and his team don’t sell operators, so there’s no incentive to recommend replacing a unit that can be fixed. We service the brand you already have. Whether you’re working with a budget Mighty Mule on a residential driveway or a high-cycle Elite on a commercial entrance, we diagnose it honestly and repair it properly. If we don’t stock the part in the truck, we know which supply channels in South Florida carry it same-day.
Signs You Need a Pro Right Now
- Your gate binds or grinds mid-travel. A gate that drags on its track or hinge points is putting stress on the operator every single cycle. The longer it runs in that condition, the more expensive the repair gets.
- The operator hums but the gate doesn’t move. That hum is usually a capacitor failure, a broken gear, or a seized drive assembly inside the operator. Running it like this can burn out the motor entirely.
- Your gate won’t close all the way. When a safety sensor thinks something is in the path, it will hold the gate open. But so will a failing limit switch or a misaligned rack. Both require a diagnostic eye, not another button press.
- The gate reverses on its own. A gate that reverses mid-cycle is either hitting an obstruction or picking up a false signal from a damaged safety loop. Either way, it’s a sign that something has changed and needs attention.
- You hear grinding from the gearbox or chain. Gearboxes don’t get quieter with time. If a LiftMaster or DoorKing operator starts grinding, the gear is already wearing. Catching it early means a gear replacement, not a full operator swap.
Our Process, Step by Step
- 1
Call and describe what’s happening. When you call (855) 362-1433, we’ll ask what the gate is doing, what brand the operator is, and whether it’s a swing or slide. The answers help us arrive with the right parts instead of making a second trip.
- 2
On-site diagnostic. We test the gate both mechanically and electrically. That means checking hinge wear, post plumb, track alignment, and the operator under load. Roland Vega does not quote a repair without seeing the gate run through a full cycle.
- 3
Written price, agreed before work starts. You get a fixed price for the repair, covering parts and labor, before we touch anything. Nothing starts without your approval.
- 4
The repair. We complete the mechanical or electrical work on-site in most cases, whether that’s welding a cracked frame, replacing hinge hardware, or swapping a control board in the operator.
- 5
Cycle test and safety verification. Before we leave, the gate runs through multiple open-close cycles while we watch for binding, misalignment, and proper safety reversing. If a gate has a safety edge or photo eye, we test it deliberately.
How Much Does Gate Repair Cost in Hollywood?
A typical gate repair in Hollywood runs between $200 and $650 for most residential jobs, with commercial and structural work landing higher. A simple hinge and alignment job on a wood driveway gate might sit around $180 to $250. A welded crack in an iron gate frame usually starts at $250 and can reach $800 with reinforcement. Electric operator repairs like a control board replacement on a LiftMaster or FAAC unit typically fall in the $350 to $700 range, depending on the board and labor involved.
The variables that move the price are straightforward: the type of gate, the failure point, and the operator brand. Track and roller replacements on a slide gate in Hollywood run higher than simple swing gate hinge work because access is tighter and parts are more involved. What we never do is surprise you with a larger invoice. The price is quoted and agreed before work starts, and our estimates are free. You’ll know exactly what the repair will cost before we begin.
Our Service Area Near Hollywood
Hacienda Gate Repair serves Hollywood and the surrounding communities, including Hallandale Beach, West Hollywood, Pembroke Park, Dania Beach, Carver Ranches, Lake Forest, West Park, Ives Estates, Aventura, Ojus, and Sunny Isles Beach. Most calls in Hollywood proper receive same-day or next-day service depending on call volume. For properties on the barrier islands or near the Intracoastal, allow a little extra time for bridge traffic. Gate repair in Hollywood is our core service area.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Hollywood
Gate repair is the process of diagnosing and fixing any mechanical, structural, or electrical problem that prevents a gate from opening, closing, or operating safely. At Hacienda Gate Repair, that covers everything from welding a cracked frame to replacing a control board in an electric operator. Because we’re a dedicated gate specialist in Hollywood, one call covers both the gate structure and the automation system. You don’t need to coordinate between a fencing company and an electrician.
Most residential gate repairs in Hollywood are completed same-day, usually within 1 to 3 hours on-site. Structural work that requires welding and paint prep may take half a day. If a specialized operator board or gear assembly needs to be ordered for a less common brand, we’ll tell you exactly what the wait time will be before we leave.
Gate repair in Hollywood typically costs between $200 and $650 for common residential issues. Welding and structural work runs $250 to $800 or more, and commercial operator repairs often fall in the $400 to $1,500 range. Every job is quoted before work starts, so you’ll know your exact price ahead of time. Call (855) 362-1433 for a free estimate.
Yes, we service LiftMaster operators and seven other major brands including FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That brand coverage means we diagnose your existing system rather than trying to sell you a replacement you don’t need. Most common operator parts for these brands are either in our trucks or available same-day from South Florida suppliers.
We prioritize urgent calls in Hollywood, especially when a gate is stuck open and leaving a property unsecured. Emergency response times vary by location and current call volume, but most urgent Hollywood calls are addressed within the same day. When you call, tell us if the gate is stuck open or stuck closed; stuck-open situations get top priority because they are a security problem.
We stand behind our workmanship on every repair. Because gate repairs vary widely, from a simple hinge replacement to a full operator rebuild, the specifics of what’s covered depend on the type of repair and the parts involved. We’ll explain exactly what’s covered on your job before work begins. Call (855) 362-1433 and we’ll give you a straight answer on any repair you’re considering.
Clear your driveway and the area around the gate so our technician has full access to both sides of the gate panel and the operator. If you have a manual release or a key for the operator, have it handy, though most units can be serviced without it. Keep kids and pets inside while we’re working, especially during welding or electrical work.
Schedule Your Gate Repair Service in Hollywood Today
When your gate stops working in Hollywood, waiting makes the problem more expensive. Call (855) 362-1433 now for a free, no-obligation estimate. We’ll diagnose your gate, quote a fair price, and complete the repair right the first time. Roland Vega and the Hacienda Gate Repair team are ready to get your gate working again.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Hollywood and surrounding South Florida communities.