Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miramar, FL
Gate installation in Miramar means working with the city’s 1980s to 2000s Mediterranean and ranch homes: stucco walls, tile roofs, short concrete driveways that run straight to the property line. Most jobs here are sliding or swing driveway gates on tight frontages, often inside HOA-governed communities where the gate has to match the neighborhood’s look and the county’s wind-load code at the same time. Hacienda Gate Repair has served Miramar since 2012. We’re a dedicated gate company, not a fencing contractor that also touches gates, and we handle the structure and the automation in one call. Reach us at (855) 362-1433.
Why Miramar Homes Are Different
Miramar’s gate work splits along a real line. West of US-441 you have the master-planned, gated HOA subdivisions from the 1990s and 2000s; east of 441 in the 33023 pocket, the homes are older and smaller, and homeowners there are more likely to add a driveway gate or pool safety gate rather than rely on a community entrance. The common thread is the short, narrow residential frontage. The driveway ends at the property line, which means cantilever slide gates and track systems run through hundreds of open-close cycles every day, far more than a gate on a long suburban lot would.
Climate is the other half. South Florida humidity, salt-laden onshore air, and heavy summer downpours corrode hinges, rollers, steel frames, and operator internals faster here than almost anywhere in the state. Flat or poorly draining driveways pool standing water at the gate base after afternoon storms. Broward County hurricane code adds wind-load bracing requirements. And after any named storm, even a tropical squall, Miramar’s HOA communities see a rush of gate calls: flooded motors seized at the driveway transition, slide-gate rollers bent by wind-blown debris, rust quietly eating steel frames between storms. That’s the work we do every week.
Styles & brands we work with
Our Main Miramar Services
Most Miramar homeowners call us for one of two things: a gate that’s stopped working mechanically, or an electric operator that has failed. Both are covered by our core Miramar pages.
Gate Repair in Miramar
Manual and structural gate repair in Miramar covers bent or rusted hinges, sagging gate leaves, broken rollers on slide tracks, and latch or post problems. On the short driveways common in the city, a gate that drags or binds is usually cycling hundreds of times a week, so hardware failure compounds fast. We quote the repair price before any work starts and carry the common Miramar hardware in the truck. Details are on our Gate Repair in Miramar page.
Electric Gate Repair in Miramar
Electric gate repair spans operator diagnostics, control board replacement, sensor and safety-edge work, and remote or keypad reprogramming. The Miramar climate is hard on motors: humidity seeps into housings, and storm flooding at flat driveway transitions seizes operators that sit low. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we diagnose your specific brand rather than guessing. See Electric Gate Repair in Miramar for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Miramar
Gate installation in Miramar is its own job, not a stretch goal tacked onto a fence quote. Most replacements here start with a worn-out track or operator on a 1980s or 1990s driveway gate, and the new install has to fit the existing concrete, match the neighborhood’s stucco-and-tile look, and meet Broward wind-load bracing. A new gate on a short Miramar driveway is a daily-use appliance: several hundred cycles a week, rain or shine. We spec commercial-grade rollers and hinges on residential footprints for exactly that reason, and we quote the complete job up front before any work starts. Our full service details live on the Gate Installation hub page.
Driveway Gate Installation
Signs you need it
The existing gate sags, drags on the concrete, or has hinges and posts rusted past the point where repair makes sense.
What it costs in Miramar
Driveway gate installation in Miramar typically runs $18 to $30 per linear foot, with the full replacement job landing between $3,000 and $12,000 depending on gate type, operator, and site prep.
How we do it
We measure the existing opening and driveway slope, pull the old gate and hardware, set new posts or weld new hinge points onto sound concrete, hang the new gate leaf, and test the full travel before we leave.
Sliding Gate Installation
Signs you need it
The current slide gate binds on a worn track, rollers are grinding or bent, or the gate no longer travels smoothly to full open.
What it costs in Miramar
Sliding gate installation in Miramar generally falls between $2,500 and $8,000, with higher-end cantilever systems on long or frequently cycled driveways pushing toward the top of that range.
How we do it
We check the concrete run and existing track or cantilever supports, set the new rail or rollers level, hang the gate, adjust the travel stops, and cycle the gate under power to confirm the rollers and guides aren’t chattering.
Automatic Gate Installation
Signs you need it
The gate was manual and you’re done walking out in the rain, or the old operator is dead and the replacement needs a matching gate prep, not just a motor swap.
What it costs in Miramar
Automatic gate installation in Miramar typically runs $4,500 to $14,000, with operator, safety edges, control wiring, and power run included depending on the system.
How we do it
We mount the operator to match the gate’s swing or slide direction, set the safety photo eyes and edges, run the power to a weather-sealed enclosure, and program remotes and keypads on site.
What Gate Installation Costs in Miramar
| Item | Typical range in Miramar |
|---|---|
| Gate material (per linear foot) | $18 – $30 |
| Sliding gate installation | $2,500 – $8,000 |
| Full driveway gate replacement | $3,000 – $12,000 |
Two things push price up in Miramar specifically: short driveways that force custom or compact slide routing, and HOA design rules that require a specific material or finish. We always quote the full number up front and it’s the number you pay.
Does a new gate in Miramar need HOA approval?
Yes, in most gated and master-planned Miramar subdivisions it does. We’ve installed in enough of them to handle the submittal and spec questions. Call (855) 362-1433 and we’ll walk through what your community requires.
How long does a gate installation take in Miramar?
Most standard driveway gates go in within one full day once materials are on site, though custom or cantilever slide work can run two days. We’ll give you a firm schedule with your quote.
Brands We Service in Miramar
We work on your brand, not just any brand. Hacienda Gate Repair services LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, with common boards, safety edges, remotes, and rollers stocked for fast Miramar turnaround. See our brands for the full list and what we keep in the truck.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miramar, FL
| Service | Typical range in Miramar |
|---|---|
| Gate material (per linear foot) | $18 – $30 |
| Driveway gate installation | $3,000 – $12,000 |
| Sliding gate installation | $2,500 – $8,000 |
| Automatic gate installation | $4,500 – $14,000 |
| Gate repair (general) | $95 – $250 |
| Sensor replacement | $75 – $180 |
| Keypad/control box replacement | $250 – $600 |
| Hinge or alignment repair | $150 – $400 |
| Operator arm or motor replacement | $650 – $1,300 |
| Service call / diagnostic | $79 – $129 |
In Miramar, prices climb when storm corrosion has spread from the hinge into the gate frame, when a slide track needs full replacement on a short driveway, or when HOA finish requirements force a custom material. Every job is quoted and agreed before any work begins.
Neighborhoods We Serve in Miramar
We cover all of Miramar, from the gated master-planned subdivisions west of US-441 to the older single-family blocks in the 33023 pocket east of the highway. Driveway layouts and HOA rules vary, but the gate hardware problems repeat across the whole city.
- Silver Shores
- Sunset Lakes
- Riverdale
- Miramar Park
- East Miramar
Typical response across Miramar is same-week for scheduled installs and considerably faster for emergency gate-down calls.
Service Area – Cities Near Miramar
Hacienda Gate Repair serves Miramar and the surrounding Broward corridor. For work just over the city line, see our pages for Hollywood, FL, West Park, FL, Carver Ranches, FL, and Andover, FL. Same specialist crew, same nine operator brands, same upfront pricing.
Serving Miramar, FL — Our Local Coverage Area
We’re based in the Miramar area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miramar
We prioritize emergency gate-down calls across Miramar and can usually have a technician on site within 24 to 48 hours, often sooner. A gate stuck open is a security issue; we treat it like one. Call (855) 362-1433 and we’ll give you a real arrival window.
It depends on your HOA and whether the replacement changes the footprint or adds automation. Most direct one-for-one gate swaps don’t require a city permit, but many Miramar HOAs still want design review. We’ll flag what applies to your street before quoting.
Yes. We service the high-cycle slide and swing systems at Miramar’s HOA entrances and small commercial properties, including operator replacement, safety-edge work, and access control integration. The same brand-level diagnostics we use on residential gates apply to commercial operators.
If your Miramar gate is down or you’re planning a replacement, call Hacienda Gate Repair at (855) 362-1433. We’ll give you a straight diagnosis and a free estimate, quoted before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miramar Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Mendoza"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniela Garcia"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman