Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Hollywood?
Gate repair in Hollywood, FL typically runs $150 to $850 for most residential jobs, with the average landing around $320. Simple fixes like a bent hinge, a misaligned roller, or a receiver that’s lost its pairing sit at the low end, while a failed swing-gate operator motor or a snapped slide-gate chain pushes toward the top. Commercial and HOA-entry systems (DoorKing loops, heavy slide operators) usually start higher because the hardware is more expensive and the gate carries heavier duty cycles.
We’re Hacienda Gate Repair. Gates are the only thing we do, and that matters for pricing. When a generalist handyman or a fence company guesses at your LiftMaster board and orders the wrong part, you pay for their guess. We work on your brand, diagnose it correctly the first time, and quote what the actual fix costs. For an exact number on your gate, call (855) 362-1433 – estimates are free.
Gate Repair Cost Breakdown (2026)
Here’s what the line items look like in the Hollywood market this year. Prices are for labor plus standard parts; specialty operator components and after-hours calls run higher.
| Repair Type | Typical Price Range |
|---|---|
| Service call / diagnostic visit | $75 – $125 (often waived when you approve the repair) |
| Manual gate adjustment (sagging, dragging, hinge/hardware) | $120 – $280 |
| Roller, wheel, or track replacement | $140 – $320 |
| Gate operator motor replacement (residential swing/slide) | $450 – $1,100 installed |
| Circuit board / control board replacement | $280 – $600 |
| Remote / keypad / receiver reprogramming or replacement | $90 – $220 |
| Safety sensor / photo-eye / loop repair | $150 – $380 |
| Chain, sprocket, or track repair (slide gates) | $180 – $450 |
| Gate arm / actuator replacement | $350 – $800 |
| Commercial / HOA operator service (DoorKing, high-cycle) | $300 – $1,500+ depending on system |
What moves the number up or down? Age of the system, brand, and parts availability are the big three. A Mighty Mule DIY-grade opener from a home center is cheap to service and cheap to replace. A commercial-grade FAAC or BFT slide operator on a long driveway is the opposite: heavier components, higher cost, but it lasts far longer when maintained. We stock and source parts across all nine brands we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so you’re not waiting two weeks for a specialty board to ship.
What Affects Gate Repair Pricing in Hollywood
Hollywood sits in a coastal South Florida climate that’s genuinely rough on gate hardware. Salt air corrodes exposed metal faster than it would inland, and the summer storm season pounds operators and hinges with wind, rain, and debris. Those conditions change what we expect to find on a service call, and they change what the repair costs.
- Operator brand and tier. A budget residential opener (think Ghost Controls or Mighty Mule) costs less to repair than a high-cycle commercial operator (DoorKing, Elite). Parts and labor scale with the duty rating, not the gate’s size.
- Coastal corrosion. Gates near the beach, in neighborhoods like Hollywood Beach or along the Intracoastal, show pitted hinges, seized rollers, and corroded control terminals much sooner. Expect more hardware replacement per visit than an inland gate would need.
- Whether it’s the gate or the operator. Mechanical failure (sag, drag, jammed track) and automation failure (dead board, failed motor, sensor fault) price out differently. Having one company troubleshoot both saves you the back-and-forth between a fence guy and an electrician – our electric gate repair is a core service, not an add-on.
- Gate type and weight. A small single swing gate is quick to work on. A wide double-swing or a heavy cantilever slide gate needs more time, heavier parts, and sometimes two technicians.
- Access and HOA constraints. HOA-managed entry gates and gated community systems in Hollywood sometimes require scheduled after-hours service so residents aren’t blocked, which affects the labor side.
- Parts urgency. Standard parts in stock cost less. If your brand needs an uncommon board ordered in, the part cost and timeline both go up.
If you’re comparing this against the cost to replace the gate outright, a repair usually wins unless the structure is badly rusted through or the operator is past its service life. We’ll tell you straight which way makes financial sense for your system rather than pushing a sale – brand-agnostic diagnostics mean we’re not steering you toward a product we prefer.
How to Save on Gate Repair
A few practical ways to keep the bill down without cutting corners on safety.
- Get it diagnosed early. A gate that “works most of the time” is often a worn roller or a loose hinge that costs $150 to fix today and a full operator replacement to fix later. Catching it early is the single biggest saver.
- Ask about the diagnostic fee. We credit the service-call fee toward the repair when you approve the work, so you’re not paying twice.
- Keep the operator clean and clear. Clear debris from the track and photo-eyes between visits. In Hollywood’s storm season, palm fronds and leaves jam slide-gate tracks and trigger false safety reversals that look like a motor failure but aren’t.
- Handle both issues in one visit. If your gate sags and the remote is flaky, tell us up front. One call covers the gate and the operator, and bundling the labor saves you a second trip charge.
- Rinse salt spray off exposed hardware. A quick freshwater rinse on beachside gates slows corrosion. It won’t fix a failing operator, but it extends the life of hinges and rollers.
Before you commit to anything, get a free estimate. Call (855) 362-1433 and we’ll walk you through what your gate needs and what it should cost for your specific brand and setup. We keep our pricing upfront so there are no surprises when the truck shows up.
FAQs – Gate Repair Cost in Hollywood
How much does an electric gate motor replacement cost in Hollywood?
A residential electric gate motor replacement in Hollywood runs $450 to $1,100 installed, depending on the operator tier and gate type. Budget DIY-grade openers sit near the low end; heavy-duty or commercial-grade operators carry higher parts and labor. Call (855) 362-1433 for an exact quote on your system – estimates are free.
Is it cheaper to repair my gate or replace it?
Repair is usually cheaper – a typical fix costs $150 to $850 versus $1,500 to $4,000+ to replace a gate and operator. The exception is a structure that’s rusted through or an operator well past its service life, where replacement makes more sense long-term. We’ll give you an honest read on which applies to your gate.
Why is my gate repair quote higher than a fence company’s?
Specialist diagnosis and correct parts. A generalist may quote low, then spend multiple visits guessing at your LiftMaster or BFT board and ordering the wrong component – you pay for that in labor. We work on your brand specifically across nine operator lines, so the quote reflects the actual fix. Call (855) 362-1433 to compare a real estimate.
Do you charge a service-call fee, and how much is it?
The diagnostic visit is typically $75 to $125, and we credit it toward the repair when you approve the work. That way the diagnosis isn’t money out of your pocket if you move forward with us.
How much does commercial or HOA gate service cost in Hollywood?
Commercial and HOA-entry systems (DoorKing loops, high-cycle slide operators) generally run $300 to $1,500+ per service call, driven by system complexity and duty rating. Call (855) 362-1433 and we’ll scope your building or community entry system properly – free estimate, upfront pricing.
Why Hollywood Homeowners and Property Managers Call Us
Whether your gate won’t open, won’t close, or won’t stop, the diagnosis has to be right before the repair can be. A dedicated gate repair company that services both the structure and the automation gets you there in one visit instead of three. We handle mechanical gate repair, electric and automated gate repair, and new gate installation – that’s the whole scope, nothing split across other trades.
If you’re also weighing service farther inland or just want to understand how pricing compares across the region, our gate repair specialists page covers the full scope of what we do, and you can read more about our gate repair in Cooper City for a sense of how nearby markets price out. For everything specific to your Hollywood gate, the fastest path is a phone call.
Get Your Free Estimate
The best way to know what your gate repair will actually cost is to have it looked at by someone who works on your brand every day. Call Hacienda Gate Repair at (855) 362-1433 for a free estimate. We’ll diagnose the gate and the operator together, quote the fix upfront, and get you a working gate – one call, one company, no guessing.
Pricing reflects the Hollywood market as of 2026. Hacienda Gate Repair offers free estimates – call (855) 362-1433.
What Our Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniela Garcia"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Eduardo Delgado