Gate Repair Cost Guide: What Hollywood Homeowners Pay in 2026

Gate Repair Cost Guide: What Hollywood Homeowners Pay in 2026

Most gate repairs in Hollywood run between $185 and $650, with the two biggest swing factors being whether the problem is mechanical or electrical, and which operator brand is mounted on the post. A dead keypad battery costs about $10 and five minutes of your time. A burned LiftMaster control board runs $400 to $750 installed. If you’d rather skip the guesswork, call (855) 362-1433 for a free estimate and we’ll tell you what you’re actually looking at.

Call (855) 362-1433

Here’s what nobody tells you: gate repair quotes in Hollywood vary by hundreds of dollars for identical work, and it’s not because companies have different overhead. It’s because most homeowners don’t know what a job actually involves, and vague quotes exploit that gap. This guide shows you exactly what drives the cost for each repair type so you can compare quotes with confidence.

Why Your Gate Repair Quote Is Probably Wrong

Most Hollywood gate companies quote jobs before they’ve seen the operator. They hear “gate won’t open” and throw out a number that splits the difference between a battery swap and a full motor replacement. That’s why two companies can quote the same job $500 apart. Neither has diagnosed anything. They’re hedging.

We take a different approach at Hacienda Gate Repair. We pull up, run diagnostics, and tell you what’s broken before we talk price. That’s why our quotes hold, and why we put the number in writing before any work starts. When a company can’t tell you what’s broken, they can’t tell you what it costs. That’s the first red flag.

The second red flag: a quote that doesn’t separate parts from labor. An honest gate repair invoice in Hollywood has those two lines broken out, because they move independently. A $45 capacitor and a $1,100 circuit board both take about an hour to install, but the parts cost changes the total by a factor of ten. If the quote is one number with no breakdown, ask why.

The 8 Most Common Gate Repairs in Hollywood: What They Actually Cost

These ranges reflect what we see in Hollywood gate repair work across residential and light-commercial properties in 2026. Parts prices are what reputable brands actually cost. Labor assumes a competent technician working at a normal pace, not a trainee charging by the hour.

• Dead keypad or remote battery: $85 – $150. This is the cheapest call you’ll make, and a big chunk of what we do is showing homeowners which battery goes where. Some keypads are hardwired and some run on 9-volts. A service call to diagnose it runs $75 to $95 in most of Hollywood, then the part is pocket change. If you want to avoid the trip charge, check your keypad’s screen or LED. If it’s dim or blank, that’s your answer.
• Misaligned photo eye sensors: $120 – $200. Hollywood’s seasonal storms and high wind can knock a sensor off true, and anyone with a screwdriver can usually spot it. The sensor eyes need to point at each other. If they’re off by half an inch, the gate thinks something is in the way and refuses to close. A pro can realign, test, and confirm the safety loop in under an hour.
• Gate off its track or roller replacement: $180 – $350. Slide gates in Hollywood, especially the ones on concrete pads that settle over the years, chew through rollers. Parts are cheap – a good sealed-bearing roller runs $15 to $30 – but the labor involves lifting the gate, adjusting the track, and sometimes grinding the concrete. The high end covers rusted hardware that won’t come out without a fight.
• Worn hinge or wheel on a swing gate: $200 – $500. Swing gates are simpler than slide gates, but they’re heavier than people think. A 14-foot iron swing gate can weigh 500 pounds, and when a hinge fails, it sags and drags. Replacing a weld-on hinge means pulling the gate, grinding, welding, and repainting. The range depends on whether it’s one hinge or both.
• Failed capacitor: $150 – $250. This is the most common motor problem on LiftMaster, Linear, and Mighty Mule openers in Hollywood. The capacitor gives the motor its starting kick, and when it dies, the motor either hums without moving or snaps the breaker. It’s a $20 – $40 part and about 40 minutes of labor, including diagnostics.
• Worn limit switch: $180 – $300. Your gate’s limit switches tell the operator where “open” and “closed” are. When they wear out, the gate stops midway, slams at the end of travel, or reverses for no reason. The part is inexpensive, but accessing it means opening the operator housing and recalibrating the travel settings. On BFT and FAAC units, this takes a little longer because of the software interface.
• Bad control board: $350 – $750. This is the expensive one, and it’s the reason Hollywood gate quotes bounce around so much. A blown control board can be caused by a power surge, moisture intrusion, or just age. LiftMaster, Viking, and DoorKing boards are all in this range, and the spread depends on the model. The board itself is $200 to $500; the labor is an hour because it’s plug-and-play plus programming.
• Complete operator replacement: $1,000 – $2,800. When the motor, board, and gearbox are all failing on a 10+ year old opener, you’re better off replacing the operator. This is where brand matters. A Mighty Mule or Ghost Controls residential swing opener runs $550 to $900 in parts. A LiftMaster commercial slide operator can hit $2,000 in parts alone before labor. We work on all nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so the recommendation is based on what matches your gate and traffic, not what we happen to have in the truck.

Every quote we give is agreed before we start. You’ll know the parts cost, the labor cost, and what the total is before we turn a wrench. No “well, it got complicated” upcharges.

Emergency and After-Hours Pricing: What’s Legitimate?

Commercial vs. Residential Gate Repair: Why the Price Gap Exists

HOA gate repairs in Hollywood are priced differently from single-family jobs, and it’s not a markup scheme. It’s physics and liability.

First, the equipment is heavier and cycles more. A residential gate might open 20 times a day. An HOA or commercial property gate opens 300 to 600 times a day. That means commercial-grade operators – Viking, FAAC, commercial DoorKing units – with bigger motors, heavier gearboxes, and longer-rated duty cycles. Parts cost more because they’re built to run all day, every day.

Second, the liability calculus changes. A 30-foot slide gate at a Hollywood condominium complex that fails and hits a car or a pedestrian is a lawsuit. Repairs on commercial gates have to meet stricter safety standards – photo eyes, safety edges, secondary entrapment protection – and the technician carries the responsibility for verifying those systems work. That’s real, legitimate cost.

Third, commercial repairs usually involve more coordination. The gate can’t be down for a day. Repair windows get scheduled around traffic, and the scope often includes testing every access point, intercom, and safety device on the loop. It’s not a bigger job because the company wants it to be. It’s a bigger job because it’s a bigger system.

Reading a Gate Repair Invoice: Line Items That Should Be There

An honest gate repair invoice from any Hollywood company, including us, should have at least these four lines:

• Diagnostic fee. This is the cost of showing up and finding the problem. Some companies waive it if you do the repair with them. Ours applies to the total job.
• Parts. Each part should be named specifically. Not “electrical component” – “LiftMaster control board, model LA400, part #K74-36162.” Vague part descriptions are a billing red flag.
• Labor. Usually broken out by the hour or as a flat rate for the job. You should know the rate and the number of hours before work starts.
• Any trip or travel charge. In Hollywood, this is usually folded into the diagnostic fee. If it’s separate, it should be stated up front, not buried at the bottom.

What shouldn’t be there: “miscellaneous,” “shop supplies,” or a vague “service fee” that’s hundreds of dollars. We once saw an invoice from a competitor that charged $180 for “gate adjustment.” The actual repair was tightening two bolts. If a line item doesn’t describe what was done, ask for clarity before you pay.

When a Low Quote Is a Problem (And When It’s Just a Better Operator)

Hollywood has dozens of companies that’ll undercut the next quote by $200 to get the job. Sometimes that’s fine. Sometimes it’s a trap.

A lower quote is legitimate when it comes from a specialist. A company that only does gates – like us – isn’t paying for plumbing trucks or HVAC training. We carry gate parts in stock. We’ve diagnosed your exact operator model a hundred times. That efficiency shows up as a lower labor estimate because we’re not learning on your dime.

A lower quote is a problem when it’s vague. If the quote says “gate repair” with no parts listed, no labor breakdown, and no diagnostic, you’re looking at a bill that will almost certainly grow once the gate is disassembled. That’s the classic lowball: quote $150, show up, “discover” the problem is worse, and send a final invoice for $900.

The way to tell the difference is simple: ask the company to name the likely failure based on the symptom, then name the part. We can do that. When someone calls and says “my LiftMaster swing gate hums but won’t move,” we’re 90% sure it’s the capacitor before we get in the truck. That knowledge is why our quotes are accurate, and it’s something no generalist can match.

When to Call a Pro

Gate operators run on 110V or 240V AC, and swing gates are heavy enough to kill. Here’s the line: if the problem involves the operator’s internal wiring, the control board, the motor, or any part of a gate that’s hanging, binding, or under tension, call someone who does this every day. A misdiagnosed board can fry a brand-new transformer. A dropped gate can crush a foot.

What you can safely do yourself: check the keypad battery, clear debris from the track, confirm the breaker is on, and verify the photo eyes are pointed at each other. That’s it. If any of those check out and the gate still won’t move, the next step is a diagnostic call – not a wrench.

If you’re in Hollywood and need gate repair done right the first time, electric gate repair is what we do every day, on every brand in this guide. One call covers the gate and the operator.

The Bottom Line

Gate repair costs in Hollywood range from $85 for a battery swap to $2,800 for a full operator replacement, and the difference is almost always about whether the problem is mechanical, electrical, or both. Vague quotes create the price spread. Specific diagnosis closes it.

Before you hire anyone in Hollywood, ask three questions: What’s likely broken based on my symptom? What does the part cost? And will I see a line-item invoice before work starts? If they can’t answer those, keep looking. If you want straight answers and a number that holds, call (855) 362-1433. Estimates are free, and you’ll know the exact cost before we touch anything. We also handle new gate installation in Hollywood if the repair doesn’t make sense.

Frequently Asked Questions