Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Miami Beach
Electric gate repair in Miami Beach typically runs $180 – $520 depending on whether you’re dealing with a failed control board, a burned motor, or a gate that’s sagged off its hinges. Most calls we handle in Miami Beach are completed in one visit because our trucks carry the boards, remotes, sensors, and hinge hardware for the brands we service. If your gate won’t open, won’t close, or starts and stops mid-cycle, call (855) 362-1433 and we’ll get a technician out to diagnose it. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so the fix is usually specific rather than a guess.
Miami Beach is its own animal for gate work. Salt-laden air off the Atlantic and Biscayne Bay gets into everything: control boards, limit switches, hinge pins, and motor housings. Add king-tide flooding on the bay side and you’ve got a set of failure modes that inland gate companies never see. Our Electric Gate Repair team knows which components fail first in this environment and stocks parts accordingly.
Why Hacienda Gate Repair Is Miami Beach’s Preferred Electric Gate Repair Company
Hacienda Gate Repair is a dedicated gate specialist, not a general contractor that takes gate calls between other jobs. Every truck we send into Miami Beach is stocked for gate work only, from door hinges to operator control boards. That focus shows up in how fast we diagnose problems. On a recent call in the Sunset Islands, we identified a failed loop detector on a Viking slide gate within twenty minutes of arrival. The homeowner had already had two general repair companies look at it without touching the actual issue.
Our customer base in Miami Beach skews toward condo associations and older single-family homes with legacy operators. We hear the same thing from property managers along Collins Avenue and homeowners around La Gorce: they want a technician who knows their specific brand and won’t push a replacement when a repair makes more sense. We service nine major gate operator brands, so brand-agnostic diagnostics are standard practice here, not a sales tactic.
Roland Vega leads our team with hands-on experience across residential and light-commercial gate systems. If you’re in 33139, 33109, 33119, or 33239, we can usually have a technician to your gate the same day you call. Estimates are free, and the price you’re quoted is the price you approve before any work starts.
Styles & brands we work with
Automatic Gate Repair in Miami Beach
Automatic Gate Repair is one of our most common calls from Miami Beach because automated gates face two enemies here at once: salt corrosion and flood exposure. Most automatic gate problems we see in Miami Beach come down to one of three things: a control board that’s been eaten by humid salt air, a motor that’s shorted after sitting in water, or a safety sensor that’s been knocked out of alignment by wind and debris. Repair usually costs $220 – $520 depending on the component that failed, and we quote the exact price before touching the gate.
One call covers the gate and the operator, which matters more in Miami Beach than most places. A sagging gate that drags on its track will kill a new motor in months. If we only fixed the motor and ignored the gate itself, you’d be calling us again next season. We address both.
Safety Sensors and Loop Detectors
Automated gates in Miami Beach must reverse or stop when something blocks their path. Salt corrosion on sensor wiring and buried loop detectors is the most common reason a gate refuses to close or reopens unexpectedly. We test the whole safety circuit, not just the sensor itself.
Control Board Replacement
Older control boards on LiftMaster and FAAC operators fail fast in Miami Beach’s humidity. We keep replacement boards for current models on our trucks and can advise when a retrofit board makes more sense than replacing the entire operator.
Electric Gate Motor in Miami Beach
Electric Gate Motor replacement is often the right call when a gate has been through several Miami Beach hurricane seasons and salt has gotten into the windings or gearbox. A new motor for a residential swing or slide gate in Miami Beach typically runs $450 – $950 installed, depending on whether you need a basic AC motor or a higher-cycle DC unit. We’ll tell you honestly if your motor can be rebuilt or if replacement is cheaper over the next five years.
If your gate motor hums but the gate doesn’t move, that’s usually a capacitor or gearbox issue. If it trips the breaker, the motor is likely drawing too much current because salt corrosion has increased resistance. Both are diagnosable in one visit.
High-Mount and Pedestal Installations
On Miami Beach’s bay side, we regularly raise operators onto pedestals because king-tide water reaches the original motor pad. This is standard practice for us here. A motor sitting even six inches higher can mean the difference between a ten-year service life and a flooded failure every storm season.
Retrofitting Legacy Motors
Many Miami Beach gates still run motors installed in the 1990s or early 2000s. Some can be retrofitted with modern control electronics. Others should be replaced before they fail permanently. We’ll give you a straight answer on which path costs less over time.
Trusted Brands We Service in Miami Beach
We work on your brand. Our technicians hold certified working knowledge of LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, from budget residential systems to high-cycle commercial units. Because we service nine competing brands rather than selling one, we diagnose the actual fault and fix it. Our trucks stock common FAAC and BFT boards, LiftMaster motors, and Linear remotes and sensors, so many Miami Beach repairs are completed in a single trip without waiting on ordered parts.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Miami Beach Homes
- Corroded control boards on legacy operators. Salt-laden humidity from the Atlantic and Biscayne Bay breaks down solder joints and traces on boards that inland gates would keep for decades. Older DoorKing and Viking boards are especially prone to this in Miami Beach’s coastal air.
- Flooded motor pads and buried conduit. On the bay-side islands and low-lying streets around 33139 and 33109, king tides push water onto gate motors and into underground wiring. We raise operators onto pedestals and move connections above the flood line.
- Sagging gates and worn hinge posts. Many Miami Beach gate frames date to the original Mediterranean Revival and mid-century construction. Wrought-iron and aluminum gates installed decades ago often have hinge posts that have rotted at the base or footings that have shifted in sandy soil.
- Storm debris jamming tracks and sensors. Blowing sand and vegetation from tropical storms collects in slide-gate tracks and blocks photo-eye sensors. After any significant storm, we recommend a debris check and track realignment.
Pricing for Electric Gate Repair in Miami Beach, FL
Here’s what Miami Beach homeowners typically pay for the most common electric gate repairs:
- Diagnostic service call: $75 – $120 (waived with repair)
- Remote control repair or replacement: $60 – $180
- Keypad replacement or reprogramming: $120 – $260
- Safety sensor or loop detector repair: $180 – $380
- Control board replacement: $220 – $520
- Electric gate motor replacement: $450 – $950
The price you’re quoted is the price you approve before any work begins. We don’t add fees after the job. Call (855) 362-1433 for an exact quote on your gate. Estimates are free.
We Also Serve Cities Near Miami Beach
Beyond Miami Beach itself, our Electric Gate Repair in Miami Beach team regularly serves Isle of Normandy, North Bay Village, El Portal, and Miami Shores. If you’re just across the causeway and your gate operator is acting up, call (855) 362-1433. We treat these areas as part of our core service territory, not as an afterthought.
Serving Miami Beach, FL — Our Local Coverage Area
We’re based in the Miami Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Miami Beach
In most cases you can retrofit an older gate with modern safety edges, photo-eye sensors, and a current control board without replacing the entire operator. The limiting factor is usually the motor itself. If the motor is still sound, a retrofit runs $350 – $700 and brings the gate up to current safety standards. If the motor has been through thirty-plus Miami Beach summers and is corroded internally, replacement is often cheaper than repeated retrofits over the next few years. We’ll inspect the motor and give you a straight answer on which path makes sense. Call (855) 362-1433 for a free estimate.
Salt air corrodes control board traces, limit switch contacts, terminal strips, and motor connections far faster than normal humidity. The best defenses are a corrosion inhibitor applied to the board and connections, dielectric grease on connectors, and keeping the operator housing sealed. We apply these treatments as part of our standard repair service in Miami Beach. One practical step you can take: have your gate operator inspected every two years, not just when it stops working. Salt damage is cumulative and much cheaper to address early. Call (855) 362-1433 and we’ll schedule an inspection.
Water reaches the motor pad or buried low-voltage conduit and shorts the operator or loop detector. On the bay side of Miami Beach, king tides push saltwater over sidewalks and lawns where gate motors sit, leaving behind salt deposits that continue corroding for weeks after the water recedes. The fix is usually to raise the operator on a pedestal and move wiring connections above the flood line. That’s a standard repair we perform throughout Miami Beach’s low-lying streets. Call (855) 362-1433 for an assessment before the next tide cycle.
If the gate is dragging by more than a half inch, hinge adjustment alone won’t fix it. A sagging gate in Miami Beach usually means the hinge post has rotted at its base or the footing has shifted in sandy soil. On wrought-iron gates from the 1940s and 1950s, we often find the post is still standing but the concrete footing has cracked. A proper repair involves resetting or replacing the post footing, then re-hanging the gate. Expect to pay $350 – $800 depending on post size and access. Ignoring the sag will eventually destroy the motor, so this is a repair that pays for itself. Call (855) 362-1433 and we’ll give you a fixed price for the fix.
Yes. Automatic gates in Miami Beach must meet Miami-Dade County’s wind-load and product-approval standards, and any automatic gate installed or substantially modified must include safety devices that reverse the gate when it encounters an obstruction. Condo associations along Collins Avenue and throughout 33139 face additional scrutiny because their gates serve multiple units and public parking areas. If you’re replacing an operator or retrofitting an old gate, we’ll make sure the installation meets current Miami-Dade requirements. Call (855) 362-1433 and we’ll walk you through what applies to your property.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Miami Beach and surrounding communities.