Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Tamarac
Electric gate repair in Tamarac usually costs between $185 and $420, depending on whether the operator, the gate itself, or both need work. Most repairs we handle in Tamarac are completed the same day we arrive, and we quote the full price before any work begins.
We know Tamarac’s gates. Most of the driveway and community-entry gates here went in during the 1960s through the 1980s, which means they were hung before modern safety rules existed. They sag, they rust, and their operators were never designed for the humidity and downpours South Florida throws at them. When a gate off Commercial Boulevard or near the Woodmont area stops opening, we’re the company that figures out whether it’s the motor, the board, the hinge, or the post. Call (855) 362-1433 for a free estimate.
Why Hacienda Gate Repair Is Tamarac’s Electric Gate Repair Company
We’re a dedicated gate repair company. Not a fence installer who sometimes touches motors. Not a handyman who’ll take a look and guess. Our Electric Gate Repair team works on nine operator brands every week, from the LiftMaster unit on a 1970s ranch off Pine Island Road to the FAAC and BFT operators running newer gated-community entries near the Colony West area.
Roland Vega leads our service operation, and the instruction to every technician is the same: diagnose the exact failure, explain it in plain language, and fix it without selling something the gate doesn’t need. Tamarac customers call us because they’ve already tried the generalist route and watched it fail twice. A gate that’s been sagging for years needs a specialist who can tell whether the post is the problem or the hinge is. That’s what we do.
Response time to Tamarac is something we take seriously. We dispatch from Hollywood and typically reach Tamarac addresses in 30 to 45 minutes for emergency calls. When an HOA entry gate on a gated street near Tamarac’s 33321 corridor goes down, the whole block is locked out. We treat that as a priority, not a scheduling option.
Styles & brands we work with





Electric Gate Motor in Tamarac
Electric gate motor repair in Tamarac is often mistaken for a full replacement job, but it usually isn’t. The motors here fail in predictable ways: water intrusion during summer storms, worn capacitor, stripped gear, or a control board that finally gave out after thirty years of Florida humidity. We open the operator, test the motor under load, and replace the failed component rather than quoting a new system the customer doesn’t need.
When the motor itself is truly dead, we source a direct replacement or a retrofit kit matched to the gate’s weight and cycle count. A standard residential swing or slide gate motor replacement in Tamarac runs between $220 and $340 for the motor, with installation adding $100 to $180 depending on access and the age of the existing wiring. We quote the exact number before we touch the gate.
When Tamarac Homeowners Call Us
Most motor calls in Tamarac start with a gate that hums but won’t move, or one that moves a few inches and stops. That’s a motor drawing current but not generating torque, or a control board that isn’t sending the full signal. We test both before recommending anything.
Post and Alignment Work
In Tamarac’s specific housing stock, the motor often isn’t the root cause. A gate that sags on a worn post forces the motor to work against added friction, which burns it out early. When we replace a motor, we check the post and hinge line in the same visit.
Gate Access Control in Tamarac
Gate access control repair in Tamarac runs into a particular problem: legacy systems. Many Tamarac gated communities still run the original DoorKing or LiftMaster entry system installed when the neighborhood was built. These use loop detectors buried in the asphalt, telephone-entry panels, and keypads that have survived decades of sun and rain. When they fail, the gate either won’t open for residents or opens for everyone.
We repair loop detectors, keypads, telephone entry boards, and wireless receivers. A typical keypad or receiver replacement in Tamarac costs between $120 and $240. A loop detector replacement, which requires cutting and resealing pavement, runs $350 to $600. Control board repair or replacement on older telephone entry systems falls in the $280 to $450 range. We quote the total before starting.
HOA and Community Entry Systems
In Tamarac’s older villa and townhome communities, one access control board often serves an entire street. When that board fails during a heavy downpour, every resident loses entry. We carry common control boards and photocells on the truck specifically so Tamarac HOAs aren’t waiting a week for a part.
Safety Sensors and Compliance
Pre-1990 access systems in Tamarac were generally installed without modern entrapment protection. When we work on these systems, we check whether photocells and edge sensors meet current UL 325 requirements. Adding a photocell pair to a legacy operator usually costs $140 to $220, and it makes the gate safer for everyone who uses it.
Trusted Brands We Service in Tamarac
We work on FAAC, BFT, Linear, and Viking operators regularly in Tamarac, along with LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. That brand coverage matters because we repair the operator you already own, not the one we’d prefer to sell you. We keep common parts in our service vehicle so that a Viking control board or a Linear remote receiver on a Tamarac gate gets fixed the same day, not ordered and rescheduled.
Common Electric Gate Repair Problems We See in Tamarac Homes
- Obsolete control boards failing in rain. Pre-1990s operators in Tamarac weren’t sealed against South Florida’s humidity. During a heavy summer storm, moisture gets into the housing, shorts the board, and the gate locks up. Replacing the board and resealing the housing usually resolves it.
- Gate sag from undersized post footings. Tamarac’s homes were built on sandy Florida soil, and many older gate posts were set with footings too small for the gate’s weight. Years of settling create sag that drags the gate and burns out motors. We correct the hang and reinforce the footing when the post is still structurally sound.
- Corroded safety photocells and keypads. Salt-laden air from the coast adds a corrosion layer that inland communities don’t deal with. Photocell lenses cloud over, keypad buttons stop registering, and intermittent lockouts follow. Cleaning or replacing these components restores reliable operation.
- Loop detector false-triggering. In Tamarac’s gated communities, a loop detector that false-triggers can leave a gate cycling open and closed repeatedly. That wears out the operator fast and creates a security gap. We replace the loop, adjust sensitivity, or relocate it depending on the condition of the pavement.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Tamarac, FL
Here’s what Tamarac homeowners and HOAs can expect to pay, based on the repair calls we complete in the 33321 area:
- Gate motor replacement: $320 to $520 installed
- Control board repair or replacement: $210 to $380
- Safety photocell replacement: $140 to $220
- Keypad or receiver replacement: $120 to $240
- Loop detector replacement: $350 to $600
- Gate sag correction and hinge work: $180 to $350
The two factors that move the number are the age of the operator and the condition of the gate structure. An older gate that hasn’t been maintained costs more to repair because we’re correcting years of wear, not just swapping a part. We quote the full price before any work starts, so the invoice matches the estimate. Call (855) 362-1433 for a free estimate on your specific gate.
We Also Serve Cities Near Tamarac
Our gate repair service covers Tamarac and the surrounding communities, including Tamarac neighbors North Lauderdale, Palm Aire, Coral Springs, and Margate. If you manage a property just outside the city limits, the same team responds with the same parts and the same direct pricing.
Serving Tamarac, FL — Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tamarac
Most aging swing gate operators in Tamarac can be repaired rather than replaced. We diagnose the motor, control board, and limit switches first. If the unit is a pre-1990 model, we often retrofit it with a modern board and safety sensors instead of ripping out the entire system, which saves the community several thousand dollars. Call (855) 362-1433 and we’ll inspect it and give you a written repair quote.
In Tamarac’s older homes, sagging gates usually start at the post footing. Hinge adjustment alone won’t hold if the post has shifted in sandy soil. We lift the gate, assess the post, correct the hang, and reinforce the footing when needed. That repair typically falls between $180 and $350 depending on how far the post has moved.
If your gate was installed before 1993, or if you don’t see photocell eyes mounted on both sides of the gate opening, it likely doesn’t meet current UL 325 entrapment standards. We can evaluate your Tamarac gate system and add the necessary sensors and edge devices. A photocell pair install runs $140 to $220.
Yes. Loop detectors are replaceable components. We dig up the old loop, install a new one, and adjust sensitivity so the gate only cycles for actual vehicles. The repair costs between $350 and $600 in Tamarac, far less than replacing the operator or the entire access system.
Yes. We repair solar-powered gate operators and wired and wireless keypads across Tamarac, including systems by FAAC, BFT, Linear, and Viking. Solar systems need clean panel connections and healthy batteries; keypads usually need contact or board repair. Call (855) 362-1433 and we’ll diagnose it on site.
Call Hacienda Gate Repair in Tamarac
If your gate won’t open, won’t close, or keeps stopping halfway, call (855) 362-1433. We quote the full price before we start, and we have the parts and the diagnostic experience to handle older Tamarac gates correctly the first time. Free estimates, direct answers, and one call that covers the gate and the operator.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Tamarac and surrounding communities.