Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Coral Terrace
Gate repair in Coral Terrace usually means one of two things: a wood or wrought-iron gate that’s sagged, stuck, or dragging, or an electric opener that stopped responding. Most Coral Terrace calls we handle are diagnosed and repaired on the first visit, and we respond to this neighborhood fast because we’re based just up the road in Hollywood. If your gate won’t open, won’t close, or won’t stop where it should, call (855) 362-1433 and we’ll get a technician out to Coral Terrace, usually the same day.
Why Hacienda Gate Repair Is Coral Terrace’s Preferred Gate Repair Company
Coral Terrace homeowners call us because we’re a dedicated gate repair company, not a general contractor who also happens to look at gates. Every technician we send into the 33155 zip code works exclusively on gate systems: the structure, the hinges, the operator, and the access controls. That focus shows up in how we diagnose. When a Coral Terrace customer describes a gate that grinds halfway open, we’re already thinking through the specific brands and failure patterns that match the symptom.
Roland Vega, who leads our team, built Hacienda around a simple idea: electric gate repair should be a core skill, not an afterthought. We service nine major operator brands because we believe you shouldn’t have to replace a good opener just because the company who installed it disappeared. For Coral Terrace specifically, our techs know the housing stock: 1950s and 60s concrete-block ranch homes where gates were often hung on masonry pilasters decades ago. That local familiarity means fewer return trips and a repair that holds.
We’ve earned a strong local reputation in Coral Terrace by showing up when we say we will and by quoting the price before any work starts. No Coral Terrace customer gets a surprise invoice at the end of the job.
Styles & brands we work with
Wood Gate Repair in Coral Terrace
Wood gate repair in Coral Terrace is one of our most requested services, and it rarely means simply replacing a slat. The wooden driveway gates and side gates on these mid-century homes were built tight to the house and the property line, which means when wood swells in the humidity, it binds. We handle hinge replacement, post re-setting, panel realignment, and rot repair, often machining or cutting on site because the opening dimensions won’t match anything off the shelf.
Swollen and Sticking Gates
Coral Terrace’s year-round humidity makes solid wood gates absorb moisture and expand against their frames. A gate that scrapes the driveway in August may swing freely in January. We adjust clearances, shave or plane where needed, and seal exposed grain to slow the cycle.
Resetting Hinge Posts
On older Coral Terrace properties, wood gate posts were often set directly into soil without proper concrete footings. Decades of tropical rain and shifting ground leave posts leaning. We reset posts in new concrete, true the gate to the opening, and rehang it so the latch actually aligns.
Typical wood gate repair in Coral Terrace runs $185 to $475, depending on post condition and whether we’re fabricating replacement sections.
Driveway Gate Repair in Coral Terrace
Driveway gate repair in Coral Terrace almost always involves a clearance problem before it involves a hardware problem. Most homes here have driveway gates squeezed between the house wall and a masonry pilaster, with only inches to spare. When a driveway gate stops opening or starts dragging, we’re looking at hinge post lean, hinge wear, or an operator struggling against added friction.
Tight-Clearance Swing Gates
On streets off Coral Way and SW 40th St, swing gates frequently have less than a foot of side clearance. That means standard off-the-shelf hinges and hardware often won’t fit, and we fabricate or modify brackets on site. We’ve reworked many original wrought-iron gates where the hinge pins had worn egg-shaped from decades of use.
Electric Driveway Operators
When a Coral Terrace driveway gate is automated, the operator usually fails before the gate itself does. But a gate that’s out of alignment will kill a new operator quickly. We service the gate and the operator together, which is why one call covers both. Typical driveway gate repair in Coral Terrace runs $225 to $650 for mechanical work, and $300 to $900 when operator replacement or retrofit is involved.
Trusted Brands We Service in Coral Terrace
We work on your brand, and that matters in Coral Terrace where many homes still run operators installed in the 1990s or 2000s. Our technicians hold certified working knowledge of LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Coral Terrace customers specifically, we keep adapters, safety photocells, receiver boards, and common hinge hardware stocked so a diagnosis doesn’t stall waiting on parts. Whether you have a Viking swing arm, a BFT slide operator, or a Linear control board, we can service it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Coral Terrace Homes
- Corroded hinges and latches from salt-laden marine air. Coral Terrace sits close enough to the coast that hardware rusts fast. We regularly replace hinge pins and latch assemblies that have seized solid within two or three seasons, often on gates that look fine from a distance.
- Leaning masonry pilasters. Many Coral Terrace driveways have original concrete or brick gate posts from the 1950s and 60s. South Florida rain settles the soil beneath them, tilting the post and dragging the gate. This is a structural repair, not a hinge swap, and it’s one we tailor to each opening.
- Obsolete control boards in legacy operators. Older FAAC and BFT boards fail and can’t be sourced anymore. We help Coral Terrace homeowners decide between a board retrofit and a full operator replacement, and we’re honest about which makes financial sense.
- Gates that sag in the middle. On wide double gates common to Coral Terrace driveways, the center often dips. Most people assume the gate frame is bent, but it’s usually hinge wear or post settlement. We diagnose the actual cause before recommending a fix.
Pricing for Gate Repair in Coral Terrace, FL
Gate repair pricing in Coral Terrace reflects the tight-clearance, older-housing reality of the neighborhood. Wrought-iron hinge replacement typically runs $160 to $380. Wood gate repair, as noted, falls between $185 and $475. Electric operator diagnostics run $95 to $150, with repairs adding $150 to $600 depending on the part. Full operator retrofits with new safety photocells start around $650 and go up with slide-gate track fabrication on tight lots. Every quote is agreed before any work begins, so you’ll know the number before we start turning wrenches. Call (855) 362-1433 for a free estimate.
We Also Serve Cities Near Coral Terrace
If you’re just outside Coral Terrace, we also cover Flagami, West Miami, Westchester, and Glenvar Heights. Many of our Coral Terrace customers have family or rental properties in these nearby neighborhoods, and our Gate Repair team handles them all. Check our Coral Terrace page for local specifics, or call us for any address in the area.
Serving Coral Terrace, FL — Our Local Coverage Area
We’re based in the Coral Terrace area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Coral Terrace
Sometimes, but not always. On most Coral Terrace properties, a sagging gate is caused by worn hinge pins or a settling hinge post, not the gate itself. Replacing hinges can fix the former. If the post has shifted, new hinges will fail quickly. We inspect the post footing and the gate frame before recommending a repair. Call (855) 362-1433 and we’ll tell you which problem you actually have.
Usually yes, but it depends on the control board. Many 1990s operators, especially older FAAC and BFT models, use boards that won’t communicate with modern UL 325 photocells and edge sensors. In those cases we can install a retrofit board or replace the operator. We’ll show you the numbers for both options. A retrofit is often half the cost of full replacement.
Most gate repairs, including hinge replacement, operator swaps, and post resetting, don’t require a permit in Coral Terrace. New gate installation or changes to the driveway approach may. Because Coral Terrace is unincorporated Miami-Dade, the rules differ from incorporated cities nearby. We can advise you on your specific situation before any work starts.
Every three to four months. Coral Terrace’s marine air accelerates rust on exposed hardware, so a hinge that runs dry for a year can seize. We recommend a marine-grade lubricant on hinge pins and latch mechanisms, and we can show you where to apply it if you’d rather handle it yourself between service calls.
Yes, and it’s common in Coral Terrace. We trim or plane the swollen edges, reset the clearances, and seal the exposed wood to reduce future absorption. If the wood is too far gone, we fabricate replacement sections on site so the gate still fits the original opening. Most swollen-gate repairs run $185 to $400. Call (855) 362-1433 for an exact quote on yours.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Coral Terrace and surrounding Miami-Dade neighborhoods with dedicated gate repair and electric gate services.