Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Plantation
Gate repair in Plantation usually runs $185 – $520 depending on whether we’re fixing a hinge, realigning a sagging gate, or replacing an operator board. Most calls in the 33388 ZIP code are scheduled within 24 to 48 hours, and we come prepared for the HOA approval question before we ever touch a hinge. If you’re dealing with a gate that won’t open, won’t close, or scrapes against the driveway, call us at (855) 362-1433 for a free estimate. We know Plantation’s gated communities, and we know the rules that come with them.
Plantation isn’t like most South Florida cities when it comes to gate work. The HOAs here actually inspect and enforce architectural standards, which means a gate repair isn’t just a mechanical fix. It’s a coordination job. We carry finish samples and hardware catalogs because we’ve sat through enough architectural review board questions to know what gets flagged. That level of local knowledge is the difference between a repair that passes and one that lands a homeowner a violation notice.
Why Hacienda Gate Repair Is Plantation’s Preferred Gate Repair Company
Homeowners and property managers in Plantation call us because we actually work on their brand of operator. If your LiftMaster swing gate is grinding, our technician knows that model’s board, limits, and common failure points before the truck pulls up. If you have a FAAC or BFT unit on a commercial entry, we’re not reading the manual for the first time in your driveway. We’re a dedicated gate repair company. Every truck, every tech, every service call is gates. Nothing else.
We’ve earned our reputation in Plantation by showing up with the right parts and a straight answer. When a gate sags in the gated community off Northwest 5th Street, we don’t guess. We diagnose, quote a number, and you approve it before any work starts. That’s how we handle every call in Plantation, from a bent manual gate on a 1980s subdivision home to a high-cycle slide operator at a community entrance. One call covers the gate and the operator. No fencing company for the structure and electrician for the motor. Just us.
Roland Vega leads our crew, and he’s been doing gate work long enough to know that Plantation’s humidity and HOA boards create a specific set of problems. Our approach to every job in this city starts with two questions: what’s mechanically wrong, and what does the association require? We answer both before we start.
Styles & brands we work with
Commercial Gate Repair in Plantation
Commercial Gate Repair in Plantation means working on the slide gates, swing gates, and barrier arms that control entry into the city’s gated communities and commercial properties along University Drive and Broward Boulevard. These aren’t residential openers. They cycle hundreds of times a day, and when they fail, you have residents stacking up at the entrance, resident access interrupted, and a board that wants answers. We service LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, and Elite commercial operators, and we diagnose problems brand by brand, not by guesswork.
Typical commercial gate repair in Plantation runs $350 – $950 for operator board replacement, loop detector repair, or gate realignment, with larger structural work quoted after inspection. Property managers here appreciate that we can quote the work, coordinate with the management company, and handle the operator and the gate structure in one visit. No need to bring in two vendors.
Slide Gate Track and Operator Service
Plantation’s larger gated entries often use slide gates on wheeled carriages. South Florida’s humidity and rain get into the track bearings and motor housings, and the gate starts grinding or stopping mid-cycle. We rebuild carriages, replace worn rollers, and reset operators so the gate travels cleanly without false stops.
Access Control Integration
Most commercial gates in Plantation tie into phone entry systems, keypads, or vehicle loop detectors. When the gate won’t respond to the code or the radio, we trace the problem through the operator’s control board, not around it. That means repairing the existing system instead of selling you a replacement you don’t need.
Iron Gate Repair in Plantation
Iron Gate Repair in Plantation is more than straightening a bent picket. The city’s 1970s through 2000s communities are dense with decorative wrought-iron driveway and pedestrian gates, and those gates corrode. South Florida’s salt-laden air and humidity attack wrought iron at the welds and hinge points. We perform weld and rust repair, hinge replacement, post resetting, and full sag correction so the gate hangs, swings, and closes like it did when it was installed.
Expect to pay $185 – $400 for hinge repair or rust remediation on a typical Plantation iron gate, with full restoration running higher depending on ornamental detail. The real issue here isn’t the metalwork. It’s the HOA. Many Plantation communities require gate repairs to match the original design exactly, down to the finish. If your hinge is replaced with a generic galvanized part that doesn’t match the ornamental scroll work, the board notices, and you get a notice. We carry HOA-approved hardware and finish samples so the repair matches what the association approved.
Weld Repair and Rust Remediation
Rust on a Plantation iron gate isn’t cosmetic. It weakens the joint until the gate sags and the operator strains against the extra load. We grind back the corrosion, weld the joint, and refinish the section to match the original. If your gate has rust creeping along the bottom rail, call before the post fails.
Hinge Post Reset and Sag Correction
When a hinge post settles into Plantation’s sandy soil, the gate drags on the driveway and ruins the operator. We reset the post footing, replace the corroded hinges, and realign the gate so the operator stops working against gravity. This is the fix that actually lasts, because we deal with the footing, not just the hinge.
Trusted Brands We Service in Plantation
We work on your brand. That’s the whole point. Our technicians carry certified working knowledge of LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so you get a diagnostic that’s specific to your operator, not a generic tune-up. For Plantation customers, we keep common replacement parts and HOA-approved hardware on the truck for fast turnaround. If your BFT slide operator throws a fault code or your Linear swing arm won’t respond, we identify the actual problem and fix it. Electric gate repair is our core skill, not an add-on.
Common Gate Repair Problems We See in Plantation Homes
- Hinge post corrosion from salt-laden air. The hinge posts on Plantation’s decorative iron gates corrode faster than inland cities because of the humid, salt-laden air drifting in from the coast. We see posts rusted through at the base, which drops the gate and strains the operator.
- Operator failure from moisture intrusion. Older LiftMaster and FAAC units on Plantation swing gates fail when humidity gets into the control board or limit switches. The motor is often fine. The electronics are fried, and that’s a board repair, not a replacement.
- Gate sag from footing settlement. Plantation sits on sandy, fast-draining soil, and gate posts settle over time. We reset the footing and rehang the gate so the operator isn’t fighting gravity on every cycle.
- HOA flag from mismatched hardware. We regularly get calls from Plantation homeowners who had a gate repaired elsewhere, only to get a violation letter because the new hinge or handle didn’t match the association’s approved finish. We mark the fix with the board’s standards in mind.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Plantation, FL
Gate repair pricing in Plantation falls into a few clear bands. Hinge repair and basic hardware replacement usually runs $185 – $280. Weld repair and sag correction on an iron gate ranges from $250 – $400. Electric gate operator repair, including board replacement, transformer work, or limit switch resetting, typically costs $320 – $700 depending on the brand and component. Full operator replacement on a residential swing gate can reach $900 – $1,800. These are Plantation market numbers, and we quote every job up front. You approve the price before we start. Call (855) 362-1433 for a free estimate, and we’ll give you a number, not a vague range.
We recently repaired a sagging wrought-iron driveway swing gate in the gated community off Northwest 5th Street in Plantation. The gate operator, a LiftMaster, was straining because the hinge post had settled. We performed sag correction, reset the post footing, and replaced the corroded hinges with HOA-approved hardware that matched the original finish. We also checked the safety photocell and loop detector to ensure UL 325 compliance, and the homeowner avoided an architectural review violation.
We Also Serve Cities Near Plantation
Our gate repair team covers Plantation and the surrounding areas including Fort Lauderdale, Broadview Park, Broward Estates, and Lauderhill. If you manage a property across multiple cities, we can schedule one route for all of them. For full details on our coverage, see Gate Repair in Plantation or visit our main Gate Repair service page.
Serving Plantation, FL — Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plantation
Yes, in most Plantation communities the HOA’s architectural review board must approve replacement gate materials, hardware finishes, and sometimes even the paint color. We carry finish swatches and HOA-compatible hardware samples so the repair matches what your board approved, and we can document the work for your property file. Call (855) 362-1433 and we’ll walk you through what your specific community requires before any work starts.
A gate that keeps sagging usually has a hinge post that has settled into Plantation’s sandy soil or a post that’s corroded at the base. Simply replacing the hinge or rehanging the gate doesn’t fix the footing. We reset the post, address the corrosion, and realign the gate so the operator isn’t fighting the sag on every cycle.
In Plantation’s humid, salt-laden climate, we recommend servicing automatic gate operators at least once a year. Moisture and sun damage degrade control boards, limit switches, and photocells faster than they do inland. Annual service catches those failures before a humidity spike kills your board and locks out your driveway. Call (855) 362-1433 to schedule a service visit.
Yes. We specialize in commercial gate repair across Plantation’s gated communities, including slide gates, swing operators, and access control integration. We service LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, and Elite operators, and we coordinate with property managers and HOA boards so the repair meets both mechanical and architectural standards.
We service nine major gate operator brands in Plantation: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is from one of these brands, we know the board, the limits, and the common failure points for that specific model. Call (855) 362-1433 for a diagnostic, and we’ll tell you exactly what’s wrong and what it costs to fix.
Call Hacienda Gate Repair for Gate Service in Plantation
If your gate is sagging, grinding, or not responding, call us at (855) 362-1433. We’ll give you a straight answer, a free estimate, and a repair that matches your HOA’s standards and your operator’s actual problem. No guesswork, no mismatched parts, no callbacks. Just a gate that works like it should.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Plantation and all of Broward County.