Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Roosevelt Gardens
Gate repair in Roosevelt Gardens usually comes down to one of three problems: a gate that won’t open, won’t close, or won’t stop where it should. Most calls we take from the 33311 ZIP involve driveway swing gates and ornamental security gates on homes built between the 1950s and 1970s. The salt air, summer downpours, and hurricane-season wind loads in this part of Broward County are hard on old steel and chain-link. Whether your gate is dragging on the ground, leaning at the post, or the operator just hums and does nothing, we can usually get a technician to Roosevelt Gardens the same day. Call (855) 362-1433 for a straight answer and a free estimate.
Why Hacienda Gate Repair Is Roosevelt Gardens’s Preferred Gate Repair Company
Most gate companies in Broward County split their attention across fences, garage doors, and general handyman work. We don’t. Gates are the only trade we work in, and every truck we send to Roosevelt Gardens is stocked for gate-specific work: hinge rebuilds, operator diagnostics, post resets, weld repair, and safety sensor replacement. Roland Vega, who runs Hacienda Gate Repair, built the company around a simple idea: if a technician sees nine different gate brands in a month, they learn what actually fails on each one. That means when we show up to a Mighty Mule opener on NW 27th Avenue or a LiftMaster on a corner lot off NW 31st Avenue, we’re not guessing. We work on your brand, because we’ve seen it fail before and we know the fix.
Roosevelt Gardens customers call us back because we treat the gate and the operator as one system. A sagging gate destroys the operator, and an operator out of adjustment tears up the gate. One call covers both. That’s the specialist advantage, and it matters more in an unincorporated area like Roosevelt Gardens where there’s no municipal gate inspector looking over anyone’s shoulder.
Styles & brands we work with





Wood Gate Repair in Roosevelt Gardens
Wood gate repair in Roosevelt Gardens typically runs $180 – $420 depending on whether we’re rebuilding hinges, replacing rotted pickets, or re-hanging the gate entirely. Many mid-century homes here have wooden driveway gates that were originally hung on steel posts set in concrete. Decades of humidity and salt air corrode the hinge hardware and soften the wood around the screws. The gate starts to sag, the latch stops lining up, and eventually the gate drags or won’t close at all. We rebuild the hinge points with treated lumber or steel backing plates, so the repair lasts longer than the original.
Hinge and Post Rebuilds
When a wood gate sags in Roosevelt Gardens, the hinge screws have usually wallowed out the wood. Tightening them is a temporary fix, and it fails after the next storm. We remove the gate, repair or replace the wood at the hinge points, and re-hang it on new heavy-duty hardware. If the post itself is rotted at ground level, we’ll replace it with a pressure-treated post set below the frost line and properly concreted.
Rotted Gate Sections and Picket Replacement
South Florida humidity keeps wood damp for months at a time. Gate bottoms rot first, especially where panels sit close to the ground or where sprinklers hit them. We cut out rotted sections, replace with matching cedar or pressure-treated material, and seal the end grain so water doesn’t wick back in. Expect to pay $150 – $350 for section replacement on a typical Roosevelt Gardens driveway gate.
Driveway Gate Repair in Roosevelt Gardens
Driveway gate repair in Roosevelt Gardens typically costs $200 – $600 for most repairs, and more when a post footing has to be dug out and re-set. The dominant pattern in this neighborhood is a wide double swing gate on original 1950s – 1970s posts, often mated to an electric operator installed years later. The gate may be steel, ornamental iron, chain-link on a tubular frame, or wood. The common denominator is that the original post footings were poured for a lighter, narrower gate and were never designed for today’s wind loads or the weight of an added operator. After a summer squall, the whole assembly leans, binds at the latch, or the operator strains and trips its limit switch.
Electric Operator Repair and Adjustment
If your gate opens halfway and stops, or jerks and reverses for no reason, the operator is fighting something. Usually it’s a gate out of plumb, a rusted hinge, or worn rack-and-pinion teeth on a slide gate. We diagnose the operator first, then fix whatever is making it work too hard. That’s the difference between a repair that lasts and a board replacement that burns out again in six months. LiftMaster, FAAC, Elite, and Mighty Mule units are common on Roosevelt Gardens driveways, and we carry parts for all of them.
Post Reset and Gate Realignment
Because Roosevelt Gardens is unincorporated, there is no city gate-permit office. Repairs fall under Broward County code, and many mid-century properties have never had their original gate hardware inspected or permitted. We routinely find undersized post footings or non-compliant operators that would have been caught in a neighboring city. That undersized footing is exactly what we documented on a corner lot off NW 27th Avenue: a 1950s concrete-block home with a wide double swing gate and a LiftMaster operator that stopped after a storm. The hinge post footing was cracked and too shallow, throwing the gate out of plumb. We reset the post, corrected the sag, and replaced the rusted hinges and safety photocells. That gate has run smoothly through two rainy seasons since.
Trusted Brands We Service in Roosevelt Gardens
We service nine major gate operator brands, and Roosevelt Gardens homes tend to carry specific ones. LiftMaster and Mighty Mule are the most common on residential driveway gates here. FAAC and Elite show up on heavier ornamental gates and on a few light-commercial properties along NW 27th Avenue and the side streets off Broward Boulevard. Because we’re brand-agnostic, we diagnose the operator honestly; we’re not trying to sell you a new opener when a control board or a limit switch is the real problem. For Roosevelt Gardens customers, that means less waiting and fewer return trips. Call (855) 362-1433 and tell us your brand; we’ll tell you what we think before we even roll a truck.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Roosevelt Gardens Homes
- Post footing failure from original construction. Many 1950s – 1970s homes in Roosevelt Gardens still have their original gate posts, set in shallow footings. Hurricane wind loads and the added torque of an electric operator crack the concrete or pull the post out of plumb. The gate leans, the latch misses, and the operator fights the load.
- Rust at hinges and latches from salt air and humidity. Roosevelt Gardens sits close enough to the coast that salt-laden air accelerates corrosion on steel and iron gates. Hinges seize, latch mechanisms corrode, and a gate that used to swing freely starts dragging. Oiling a rusted hinge buys you a week, not a season.
- Solar-charged battery failure on long driveway gates. Homes with wide driveway gates or longer runs often use solar panels to charge the operator battery. The South Florida sun is strong, but a corroded connection, a weak panel, or an aging battery leaves the gate stuck open or closed. We test the whole charging circuit, not just the battery.
- Safety sensor and entrapment protection faults. After a storm or a power surge, photo eyes get knocked out of alignment or fail outright. The gate then refuses to close, or worse, closes on a vehicle. We replace and align photocells on every repair where the operator is involved.
Pricing for Gate Repair in Roosevelt Gardens, FL
Here’s what Roosevelt Gardens homeowners can expect to pay. Hinge and latch rebuilds on an iron or chain-link gate run $150 – $300. Wood gate repair with section replacement runs $180 – $420. Post reset and re-hanging starts around $350 and goes up when we have to dig out and re-pour a footing. Electric operator repair, including new photocells or a control board, typically lands between $250 and $550 depending on the brand and the failure. Full operator replacement, when the old unit isn’t worth saving, usually runs $700 – $1,400 installed. Every price is quoted and agreed before any work starts. You’ll know the number before we touch the gate. Call (855) 362-1433 for a free estimate.
We Also Serve Cities Near Roosevelt Gardens
If you’re just outside Roosevelt Gardens, we cover the surrounding area too. We regularly run repairs to Boulevard Gardens, Rock Island, Washington Park, and Broward Estates. Most of those calls are the same kind of work we do in Roosevelt Gardens: aging driveway gates, rusted hardware, and electric operators on their last legs. If your gate isn’t behaving, call (855) 362-1433 and tell us where you are. If you need broader service information, see our full Gate Repair page.
Serving Roosevelt Gardens, FL — Our Local Coverage Area
We’re based in the Roosevelt Gardens area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Roosevelt Gardens
Because the original post footings on most 1950s – 1970s Roosevelt Gardens homes are too shallow for the wind loads and the weight of an added electric operator. The soil around the post gets saturated in a downpour, the footing shifts, and the gate leans. Tightening hinges won’t fix a shifted post. The repair is a post reset: dig out the old footing, set the post deeper and plum, and re-hang the gate on new hardware. Call (855) 362-1433 for a free assessment.
Yes, we can. If your gate is on a long driveway or a spot where running conduit from the house is impractical, a solar panel and battery kit can power most LiftMaster, Mighty Mule, FAAC, and Elite operators. We size the panel to your operator’s draw and the amount of daily use, then mount it where it gets clean sun. The existing operator stays. You’re only paying for the solar retrofit and the labor. Call (855) 362-1433 for a quote specific to your gate.
Usually one of three things: the operator is under-powered for the gate’s weight, the hinges or track are binding from rust or misalignment, or a solar-charged battery is weak and delivering low voltage. We check the operator’s duty rating against the gate’s actual loaded weight, clean and re-lube the bearing points, and load-test the battery under real use. If the opener was undersized from the start, we’ll tell you honestly and quote a properly matched replacement. Call (855) 362-1433 and describe your gate; we’ll tell you what we think before the visit.
Your gate should reverse immediately when it contacts an obstruction, and its photo eyes should beam across the gate opening and stop the operator when that beam is broken. On a Roosevelt Gardens gate that’s been through a few storm seasons, we regularly find misaligned photo eyes, corroded wiring, or bypassed safety circuits from a previous repair. We test entrapment protection on every electric gate repair we do, and we won’t leave until it’s right. If you’re not sure yours works, call (855) 362-1433 and we’ll check it.
Roosevelt Gardens is unincorporated Broward County, so gate repairs fall under county code rather than a city permit office. Most repair work, including hinge replacement, post resets, and operator repair, doesn’t require a permit. A full gate replacement or a new automated system may require county approval depending on the scope and the electrical run. We can tell you upfront whether your job triggers a permit requirement, and we handle the paperwork when it does. Call (855) 362-1433 for guidance on your specific project.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Roosevelt Gardens and Broward County since 2014.