Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across West Park
Gate repair in West Park usually costs $185 – $460 depending on whether it’s a hinge reset, a track realignment, or an operator replacement, and most calls are handled same-day or next-day. If your gate is dragging on the driveway, missing the latch, or the motor runs but the gate doesn’t move, that’s what we do all day, every day. We’re Hacienda Gate Repair, led by Roland Vega, and gates are the only trade we work. Call (855) 362-1433 and we’ll get a technician to your West Park property fast.
Why Hacienda Gate Repair Is West Park’s Preferred Gate Repair Company
West Park is a small, dense city. Word travels fast here, and our reputation in the 33023 zip code has been built one gate at a time off Southwest 25th Street, Southwest 56th Avenue, and the side streets off Hallandale Beach Boulevard. Customers across West Park call us because we show up with the right parts for their specific operator brand, not a van full of whatever was left over from the last job.
Roland Vega built this company around a single idea: a gate specialist should know exactly what’s bolted to your post before they touch it. That means we stock repair components for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on our trucks. When a West Park homeowner calls about a Ghost Controls opener that won’t respond or a Viking commercial board with a fault light, we already know what we’re walking into.
Response time to West Park from our Hollywood shop is typically under an hour for emergency calls. We don’t book multiple appointments on top of yours. You call, we give a straight answer on when we can be there, and the price is quoted and agreed before any work starts.
Styles & brands we work with
Gate Welding in West Park
Gate welding in West Park comes up more than you’d think, mostly because the metal gates on our mid-century homes have been re-welded, patched, and re-patched over 50 years of salt air and summer storms. A rusted hinge plate cracks, a weld seam splits at the corner, or a gate leaf starts sagging because the frame itself has let go. That’s gate welding territory, and we do it on-site so you’re not paying to haul a gate back to a shop.
When Welding Beats Replacing
A clean crack at a hinge or a broken weld on a wrought-look gate frame is usually a same-day fix for $150 – $320. If the steel is rusted through in multiple spots or the bottom rail is paper-thin from years of standing water, we’ll say so and quote a new gate instead of patching something that’ll fail again in a year. West Park’s salt-laden air means we see a lot of gates that look fine on top but are crumbling at the buried post line.
What We Typically Weld
Hinge plates, latch brackets, cracked frames, broken pickets, and sagging rail corners are the common jobs. We also weld new posts into place where the old one rotted at its base. If the gate is off a brick or block pier, we’ll grind it clean, set the new mount, and weld it square so the gate swings true.
Commercial Gate Repair in West Park
Commercial gate repair in West Park usually means a sliding or swing gate at a small apartment building, a warehouse off Southwest 40th Avenue, or a community entry that’s been grinding for weeks and finally quit. These calls range from $285 for a limit-switch replacement up to $900 – $1,400 when a high-cycle operator like a Viking or Elite unit has failed and needs a new board or gearbox. Most commercial gate failures in West Park are caught late because nobody owns the problem until the gate physically won’t move.
Property Managers and HOAs
If you manage a small complex or HOA entry in West Park, you know what a stuck gate does to a Tuesday morning. We work with property managers across Broward County who need one vendor for the gate and the operator, not a fencing company for the metal and an electrician for the motor. One call covers the gate and the operator, and we can schedule work around tenant traffic.
Electric and Access Control Repairs
Commercial operators in West Park run longer and harder than anything residential. BFT and Viking units in particular need regular limit and torque adjustments, and when a loop detector fails or a safety edge tears, the gate goes down. We diagnose and repair the entire system: operator, loops, edge sensors, keypads, and the gate itself. Electric gate repair is not an afterthought for us. It’s most of what we do.
Trusted Brands We Service in West Park
We work on your brand, whatever it is. We carry repair parts and diagnostic tools for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we service nine competing operator brands, we’re not tied to pushing one product line. Our job is to identify the right fix and make it. For West Park customers, we keep common wear items like control boards, limit switches, photocells, and remotes on the truck so most repairs don’t need a second visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in West Park Homes
- Post-storm sag and dragging gates. West Park’s older block-and-stucco lots sit on fill that saturates fast in a summer downpour, and shallow-set posts shift. The gate starts dragging on the driveway or missing the latch by half an inch.
- Builder-grade operators that never should have been installed. Newer West Park developments often get the cheapest automatic opener the builder could find. We replace those underpowered units with properly rated systems and fix the undersized power runs at the same time.
- Manual gates that were motorized wrong. Adding an automatic opener to a swing gate that was installed manual in the 1960s requires reinforcing the hinge post and setting proper travel limits. We see a lot of gates that sag because nobody did that.
- Rack and pinion wear on slide gates. UV, rain, and salt air wear down the nylon rack on a slide gate, and the pinion starts slipping. The motor runs, the gate shudders, and eventually it stops moving entirely.
Pricing for Gate Repair in West Park, FL
| Service | Typical Cost in West Park |
|---|---|
| Gate realignment and latch fix | $185 – $320 |
| Hinge and post repair | $220 – $410 |
| Operator repair (residential) | $260 – $520 |
| Operator replacement | $480 – $950 |
| Gate welding | $150 – $320 |
| Commercial gate repair | $285 – $1,400 |
What moves the price is parts versus labor. A welded hinge is all labor and runs low. A burned-out LiftMaster control board is mostly parts. We quote the full price before any tool comes off the truck, and that’s the price you pay. Call (855) 362-1433 for a free estimate.
We Also Serve Cities Near West Park
Our Gate Repair team covers all of West Park and the surrounding area, including West Park, Andover, Carver Ranches, Miramar, and Hollywood. If you’re just outside the city line, call anyway. We’re usually close.
Serving West Park, FL — Our Local Coverage Area
We’re based in the West Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Park
Because the gate post was set in saturated fill without deep enough footings, and that’s the norm on West Park’s mid-century block-and-stucco lots rather than the exception. The soil around the post turns soft after a summer deluge or a tropical system, the post leans, and the gate drops. We re-set the post with deeper footings and proper drainage so it stops happening. Call (855) 362-1433 if your gate is dragging after the last storm.
Yes, and we do it regularly for homeowners who are done getting out of the car in the rain. The short answer is that most 1950s – 70s gates in West Park can be motorized, but the hinge post usually needs reinforcement first. We’ll mount the operator, set the travel limits, and wire the safety photocells so the gate meets UL 325 entrapment protection. Call (855) 362-1433 for a free measure and quote.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is one of those, we have the diagnostics and the parts. If it’s not, we’ll still diagnose it and tell you honestly what the fix costs or whether a replacement makes more sense. Call (855) 362-1433 and ask for the brand specialist on duty.
Yes. Automatic gates in West Park must meet UL 325 entrapment protection standards, which means photo eyes, safety edges, or both depending on the gate type. On a recent job off Southwest 56th Avenue, we repaired a builder-grade slide gate on a 1960s duplex lot and installed a safety photocell as part of the job because the original system had none. If your gate doesn’t have working entrapment protection, we’ll quote it and you’ll know the cost before we start.
Yes. For commercial accounts in West Park we prioritize gate-down calls and can usually have a technician on site within the hour. The cost depends on the failure: a limit switch runs around $285, a failed Viking or BFT control board runs higher. We’ll diagnose on the spot and quote the repair before any work begins. Call (855) 362-1433 and tell us the gate is down.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving West Park and Broward County.