Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Hollywood?
Replacing a gate motor or opener in Hollywood typically runs $950 to $3,200 installed, depending on the operator and the gate it has to move. A straightforward residential swing-gate opener usually lands in the $950 to $1,600 range, while a heavy slide gate or a light-commercial operator with access control climbs to $2,200 to $3,200. Repairs instead of replacements stay much lower, often $150 to $650 for the motor, board, or arm problem that stopped the gate.
We’re Hacienda Gate Repair, a dedicated gate specialist working across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t do fencing, garage doors, or handyman work. Gates are the whole job, which is why we can quote a Hollywood motor swap accurately instead of guessing at it.
Key Takeaways
- Full motor or opener replacement in Hollywood: $950 to $3,200 installed, all-in.
- Most residential swing-gate jobs: $950 to $1,600.
- Repair rather than replace usually saves 40% to 70% of the replacement figure.
- Access control, keypads, and remotes add $150 to $850 on top.
- Brand matters. A Mighty Mule DIY-grade opener and a DoorKing commercial operator are priced on completely different scales.
Gate Motor & Opener Cost Breakdown (2026)
Here’s what the numbers look like across Hollywood in 2026. These are installed prices for the work most of our customers actually ask for, not stripped-down equipment-only figures that leave out labor.
| Item | Typical Cost Range | Notes |
|---|---|---|
| Residential swing-gate opener (single gate) | $950 – $1,600 | LiftMaster, FAAC, or Linear class operator, installed |
| Residential swing-gate opener (double gate) | $1,500 – $2,600 | Two arms or dual operator with synced boards |
| Slide-gate operator (residential) | $1,700 – $2,900 | Includes track, chain or rack, and safety sensors |
| Light-commercial slide operator | $2,400 – $3,200+ | DoorKing or high-cycle BFT class, HOA and small commercial |
| Control board replacement | $250 – $550 | Brand and board availability drive the spread |
| Motor or gearbox replacement | $350 – $750 | Common on older operators that still have life in the arm |
| Battery backup install | $200 – $450 | Useful through summer storm outages |
| Keypad, remote, and receiver | $150 – $400 | Per entry point |
| Access control integration | $400 – $850 | Telephone entry, app control, or prox readers |
| Safety sensor and photo-eye set | $180 – $400 | Non-negotiable on any automated gate |
Where that range lands depends mostly on how heavy the gate is and how much electronics the entry point has to talk to. A single-leaf residential swing gate with a basic remote is the low end. A double driveway gate on a corner lot, running a DoorKing operator with keypad entry and a phone-app module, sits at the top. If we’re swapping an operator on a gate that already has sensors and wiring in good shape, you save labor. If the gate itself is sagging or binding, the operator alone won’t fix it, and that’s the case where a two-part quote makes sense. One call covers the gate and the operator, so you’re not chasing down a separate company when a hinge is the real problem.
What Affects Gate Motor & Opener Pricing in Hollywood
Hollywood isn’t a flat market. A gate on a canal-side property in Hollywood Lakes quotes differently from one on a corner lot in Emerald Hills, and a beachside entry near Hollywood Beach has its own set of considerations. Here’s what moves the number:
- Gate weight and leaf count. A light aluminum pedestrian gate and a 400-pound double driveway gate need very different operators. Heavier gates need commercial-grade motors, and that’s where pricing steps up by hundreds of dollars.
- Operator brand and class. A Mighty Mule or Ghost Controls residential opener is built for lighter daily cycles. A DoorKing or BFT high-cycle operator handles an HOA or small commercial entrance and costs more both to buy and install. If you already own an operator, tell us the brand. We work on all nine we carry, so we can tell you fast whether the fix is a part or a whole new unit.
- Salt air and humidity. Hollywood sits right on the coast, and the salt-heavy air off the Intracoastal works on metal and electronics alike. Operators near the beach tend to show corrosion on terminal blocks, and gate frames rust at the welds faster than inland properties. That can mean extra labor on a job that would be simple in a drier market.
- Wiring distance and power source. An operator that has to run power out to a gate 120 feet from the house costs more in wire and trenching than one sitting 15 feet from an outlet. Homes set back from the road along the Hollywood Boulevard corridors often need longer runs.
- Access control complexity. A plain remote is the cheapest entry. Add a keypad, then a telephone entry intercom, then app control, and the electronics side of the job grows. HOA and commercial properties often need all of it, plus a log of who came through.
- Permits and inspections. Automated gates fall under Florida building and electrical requirements, and some setups need permits before the operator gets energized. We’ll tell you what your specific gate needs so you’re not caught off guard mid-job.
One more factor people miss: whether the existing gate was ever set up correctly in the first place. We regularly get called to gates in West Hollywood and the older neighborhoods off Hollywood Boulevard where an undersized operator was installed years ago and has been slowly destroying itself ever since. The motor isn’t the problem; the original install was. We’d rather tell you that up front than sell you another motor that fails the same way.
How to Save on Gate Motor & Opener
There’s no magic discount on a gate operator, but there are ways to keep the bill from climbing. These are the ones that actually work:
- Fix the gate before you blame the motor. A gate that drags, sags, or won’t swing freely forces the operator to work harder and shortens its life. A $200 to $400 hinge or alignment repair can add years to a motor that would otherwise fail early.
- Repair instead of replace when the motor is still good. A control board or gearbox swap at $250 to $750 beats a $1,600 full replacement. We’ll tell you honestly which side of that line your operator is on.
- Get a real diagnosis, not a guess. Brand-agnostic diagnostics is a big part of why we carry nine operator brands. If a tech only sells one brand, everything looks like it needs a new one of that brand. We test the actual fault first.
- Bundle the electronics in one visit. If you need a keypad and safety sensors anyway, doing it during the same service call saves you a second trip charge.
- Ask for a free estimate. Call (855) 362-1433 and we’ll give you a straight, itemized quote for your Hollywood gate. No surprise add-ons.
One caution before you consider any DIY work on the operator: automated gates carry stored energy, live mains wiring, and a moving gate that can crush. If the operator won’t respond, or you smell burning at the control box, stop and call a trained professional. The money you might save on a DIY repair isn’t worth the risk.
What Does a New Gate Motor or Opener Cost Compared to Repair?
Repair is almost always cheaper than replacement when the motor is sound. A board or gearbox fix at $250 to $750 handles most failures, while a full new operator installed runs $950 to $3,200. The tipping point is age and cycle count: if your operator is well past its service life and the motor itself is failing, a new unit is the better spend.
Here’s the honest version. If you have a ten-year-old LiftMaster on a residential swing gate and the arm is grinding, that’s rebuild territory. If a DoorKing operator on an HOA entrance has been through several board failures and the gate is heavy, replacement pays for itself faster than another round of repairs. We’ll walk your gate through the decision rather than pushing one answer. See our home page for the full scope of what we do.
Why Brand Choice Drives the Price
The single biggest swing in your quote is which operator you’re comparing. We work on nine brands, and they don’t sit in the same price bracket:
- Ghost Controls and Mighty Mule are the budget-focused residential lines. Best for a light single swing gate; priced at the low end of the range.
- LiftMaster and Linear are the mainstream residential workhorses. Most single-family Hollywood driveways land here.
- FAAC and BFT sit in the reliable mid-range and are common on heavier driveways and light commercial.
- Viking operators turn up on mid-size gates and are a solid repair candidate.
- DoorKing and Elite are the heavier commercial and HOA-grade players. DoorKing in particular shows up on gated communities and telephone-entry setups where price reflects cycle count and duty rating.
Because we service all of them, we don’t have a stake in steering you toward one brand. If a repair keeps your existing operator running, that’s what we’ll recommend. And if you’re on the other side of South Florida and want to see the same approach in a neighboring market, our Gate Motor & Opener in Cooper City page runs through it.
FAQs – Gate Motor & Opener Cost
How much does a gate motor cost in Hollywood, FL?
Expect $950 to $3,200 installed in Hollywood in 2026, with most residential swing-gate jobs landing between $950 and $1,600 and heavier slide or commercial operators at $2,200 to $3,200. The exact figure depends on gate weight, brand, and how much wiring and access control the entry needs. Call (855) 362-1433 for a free, itemized estimate on your gate.
Is it cheaper to repair or replace a gate opener?
Repair at $150 to $650 is cheaper than replacement at $950 to $3,200 whenever the motor and arm are still healthy, which covers most board and gearbox failures. Replacement wins once the operator is past its service life or a heavy gate has started wearing it out. Call (855) 362-1433 and we’ll tell you which applies to yours.
Can you come out today for a broken gate motor?
Often we can, especially for gates stuck open or closed. A same-day diagnosis at a typical Hollywood property runs $150 to $350 for the call and assessment, and many repairs are finished on the first visit. Have your operator brand ready when you call (855) 362-1433 so we can load the right parts.
How much does adding keypad or access control cost?
Keypad and remote upgrades run $150 to $400 per entry point, and fuller access-control integration with telephone entry or app control runs $400 to $850. If you’re already having the operator serviced, bundling it in one visit saves a second trip. Call (855) 362-1433 for a bundled quote.
Do I need a permit for a new gate motor in Hollywood?
Some automated-gate installations need a permit and an electrical inspection before the operator is energized, and the answer depends on your property and the setup – we’ll tell you what yours needs before any work starts. Permit fees typically add $150 to $450 to the project where they apply. Call (855) 362-1433 and we’ll map out the requirement for your Hollywood address.
Getting a Real Number for Your Gate
The ranges above cover the Hollywood market well, but your gate is specific. A gate that won’t open, won’t close, or won’t stop is usually a diagnosis away from a clear price, and that diagnosis doesn’t cost you a thing. We’re a dedicated gate repair company, not a multi-trade outfit that throws gates in with garage doors and fencing, so the person who shows up actually knows the operator sitting on your property and the brand on its cover.
Call (855) 362-1433 for a free estimate. Tell us the brand, describe what the gate is doing, and we’ll give you a straight answer and a clear next step.
Pricing reflects the Hollywood market as of 2026. Hacienda Gate Repair offers free estimates – call (855) 362-1433.
What Our Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Mendoza"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniela Garcia"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman