Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Broadview Park, FL | Hacienda Gate Repair
We repair Mighty Mule gate operators across Broadview Park, FL, and nearby areas like Mighty Mule service in Fort Lauderdale, and we do it as an independent shop, not a manufacturer warranty center. What makes our work here different is simple: most Mighty Mule failures in this 33317 pocket trace back to the ground the operator is bolted to, not the unit itself, because the sandy soil shifts after every heavy rain. We fix the gate, the mount, and the alignment in one trip, which is what you actually need. Call (855) 362-1433 for a free estimate.
Why Broadview Park Residents Choose Us for Mighty Mule Service
We service the full Mighty Mule line, from FM350 swing openers to MM572 slide motors, and we’re familiar enough with these units to know that a Mighty Mule control board that faults after a humid week is often a moisture problem, not a dead board. Roland Vega runs Hacienda Gate Repair, and he learned the mechanical and electrical side of the trade at McFatter Technical College before he ever touched a gate opener in the field. We’re a dedicated gate shop, no landscaping on the side, no general handyman calls. You’ll never catch us in Broadview Park guessing at a diagnosis. If the gate isn’t working, there’s a reason, and it’s usually findable in under ten minutes.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Broadview Park
- Control boards faulting after humid-season moisture intrusion. Broadview Park’s subtropical air pushes humidity into operator housings, and we see Mighty Mule boards throw error codes or freeze the gate mid-travel when condensation settles on the limit-switch wiring.
- Slide-motor chain and drive gear wear from water-pooled swales. When a storm leaves standing water along the swale, it softens the sandy soil under the track, the post heaves, the track warps, and the MM series gear teeth take the abuse.
- Swing-arm over-torque from homeowner-installed mounting plates. A lot of Broadview Park gates were bolted to original galvanized posts by the homeowner. The Mighty Mule arm works, but the geometry doesn’t, and the obstruction setting trips constantly.
- Battery and solar-charge failures on low-voltage backup kits. A few cloudy weeks in a row can prevent the panel from topping off the cell, and the gate loses power or creep-opens at odd hours. We test the charge path, not just the battery.
- Rust-seized hinges and bottom-rail corrosion. Salt-laden air and constant moisture mean hinges bind and gates sag from the bottom up. The operator fights the rust, and the operator loses.
Mighty Mule Service in Broadview Park: What Local Conditions Mean for Your Equipment
Because Broadview Park is unincorporated and much of the driveway-gate stock went up as weekend homeowner projects, Mighty Mule swing arms are frequently bolted to non-standard mounting plates. That’s not a manufacturer defect. It’s a geometry problem. The arm pushes, the gate torques, the obstruction setting trips, and the gate reverses halfway through a cycle. A technician who only knows Mighty Mule will swap the board and call it done, then the same fault returns two weeks later. We check the post lean, the hinge alignment, and the mount plate thickness before we ever condemn the operator. That’s the difference between a repair that holds and a repair that doesn’t.
Mighty Mule Models & Products We Service in Broadview Park
We work on the FM series swing openers, including the FM350, FM500, and FM600, and the MM series slide openers like the MM360, MM560, and MM572. We also service the Heavy-Duty Single swing opener and the solar and battery-backup accessory kits. We stock genuine Mighty Mule control boards, arms, and drive gears, but we also fit quality aftermarket batteries and hardware where the OEM part fails the same way every few years. If the chassis and motor are sound, we repair it. We recommend replacement only when corrosion and board damage make the repair cost more than the unit is worth.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Broadview Park
- Service call and diagnostic fee: $75 – $125, applied toward the repair if you hire us.
- Control board replacement: $180 – $350, depending on the Mighty Mule model and whether the board is stocked or ordered.
- Limit switch repair or replacement: $90 – $180.
- Slide-motor drive gear replacement: $150 – $300, including re-tensioning the chain.
- Swing-arm re-alignment and mount reinforcement: $120 – $260.
- Battery-backup or solar-kit repair: $75 – $200, depending on whether it’s the battery, the controller, or the panel.
- Full slide-gate re-alignment with post reset: $250 – $550, which is common in Broadview Park after a heavy storm.
The price you’re quoted is the price we agree to before any work starts. No invoice surprises. Call (855) 362-1433 for an exact quote, estimates are free.
Serving Broadview Park, FL — Our Local Coverage Area
We’re based in the Broadview Park area and know this community well, including nearby Mighty Mule in Plantation. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Broadview Park
Usually not. In Broadview Park, the most common cause is a post that’s shifted in sandy soil or a mount plate that flexes under load, so the obstruction sensor trips and reverses the arm. We check the geometry before we suspect the operator. Call (855) 362-1433 and we’ll tell you what’s actually wrong, estimates are free.
Because the ground under the post heaves when the swale pools with water, and the track warps just enough to throw the gate. We re-set the post, re-plumb and level the track, and reset the limit switches so the MM series motor runs clean. Call (855) 362-1433 to schedule a look, estimates are free.
Yes. We test the full charge path, the panel output, the controller, and the battery itself. Often the panel is fine and the battery is sulfated from sitting in humid heat, which we can replace with a quality aftermarket cell that lasts longer. Call (855) 362-1433 for a diagnostic, estimates are free.
No, Hacienda Gate Repair is an independent Mighty Mule service provider, not manufacturer-affiliated or authorized. That means we fix the actual failure instead of defaulting to a new unit, and we’re not bound by a warranty program’s replacement rules. See our Mighty Mule sales & service page for more on how we approach this brand.
Yes, but the fix often starts with the post and the mount plate, not the operator, which is typical for Mighty Mule repair in Broward Estates too. We reinforce the anchorage, align the hinges, and then tune the Mighty Mule’s limit and obstruction settings to the corrected geometry. After that, the unit runs the way it should have from the start. Call (855) 362-1433 for a realistic assessment, estimates are free.
Service Areas Near Broadview Park
We cover Broadview Park and the neighboring communities across south Broward, including Hollywood, West Hollywood, Pembroke Park, Dania Beach, and Carver Ranches. For more on our broader coverage, see Broadview Park service area, or check Mighty Mule service in Golden Glades and Mighty Mule service in Melrose Park.
Book Your Mighty Mule Service in Broadview Park Today
If your Mighty Mule gate is acting up in Broadview Park or you need Mighty Mule in Lauderhill, call us at (855) 362-1433. We’ll get your free estimate scheduled, and if it’s urgent, we’ll work to get someone out the same day. No runaround, just a diagnosis and a straight quote.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Broadview Park.