Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Fort Lauderdale, FL | Hacienda Gate Repair
We repair Mighty Mule gate operators across Fort Lauderdale, and we do it as an independent shop with no manufacturer affiliation. The thing that makes our Mighty Mule work different here is simple: we already know what the salt air, the storms, and the water table do to these units, because we’ve watched it happen for years. Call (855) 362-1433 for a free estimate. If you own a Mighty Mule on a canal-front lot or anywhere east of Federal Highway, we’ll probably find the problem faster than you expect.
Our team services the full Mighty Mule range, from older MM360 swing-arm units to FM700 and FM200 models rolling out across newer HOA gates. We stock OEM boards, arms, and receivers, and when a part is discontinued we know which aftermarket replacements actually hold up in this climate. Roland Vega, our owner, grew up off Pembroke Road and learned motors and controls at McFatter Technical College. Gates are the only trade he has ever wanted to run, and the only one we run.
Why Fort Lauderdale Residents Choose Us for Mighty Mule Service
Most gate companies in Fort Lauderdale will tell you they work on Mighty Mule. A lot of them are fencing crews who sub out the electronics to someone else. We are not. We are a dedicated gate shop, and Mighty Mule is one of the nine brands we service every week, alongside LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Because we work across those brands, we are not pushing you toward a unit we happen to sell. We diagnose the Mighty Mule you already have and tell you straight whether it is worth fixing.
Every truck we send out carries Mighty Mule parts, not a catalog and a promise to come back next week. That matters in Fort Lauderdale, where a gate that will not close is a security problem and a liability problem the same afternoon. We quote the price before any work starts, so you know the number before we touch a screw. If the gate is not working, there is a reason, and it is usually findable in under ten minutes. That is not marketing. That is what happens when gates are all you do all day.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in Fort Lauderdale
- Control board corrosion on MM360 and MM560 units. Salt air off the Atlantic and the Intracoastal gets into the housing through tiny vent openings and works on the board like slow acid. We see erratic opening and full failure on units less than four years old in Victoria Park and Coral Ridge. The fix is often a new OEM board plus a sealed housing upgrade.
- Battery backup failure after storm-season power flickers. Fort Lauderdale’s June-to-November storms hammer the grid, and each flicker ages your backup battery. We see gates that work fine on utility power but go dead the moment the lights blink out. That is a battery replacement, not a board problem, and it is one of the fastest repairs we do.
- Hinge and post rust on decorative aluminum gates. This surprises people: the Mighty Mule arm is still sound, but the gate it mounts to has corroded badly enough to throw the geometry off. The operator then strains against misalignment and burns out motors. We repair the gate structure and re-mount the operator, so one call covers the gate and the opener.
- Keypad and remote receiver water damage. Year-round humidity works its way into outdoor keypads and receiver enclosures, and the result is a gate that works sometimes and ignores you other times. We replace the receiver, seal the keypad, and test it through repeated cycles before we leave.
- Low-lying installation flooding on canal-front properties. This is the most Fort Lauderdale-specific failure we see. Operators mounted at grade in the Finger Streets or along the canals in Coral Ridge can sit in standing water after heavy rain. When the housing floods, the board and the motor both suffer. We re-mount the unit higher, add drainage clearance, and use sealed or water-rated replacements where needed.
Mighty Mule Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Fort Lauderdale sits in a salt-spray zone with a high water table and canal-front lots everywhere. That combination rewrites the rules for gate repair compared to inland cities. A Mighty Mule operator on an acre lot in Davie might run for a decade without a corrosion issue, while Mighty Mule repair in Lauderhill often deals with similar inland conditions. The same unit on a canal-front property in Victoria Park or the Finger Streets can show control board corrosion within two or three seasons, because the salt air never stops and the operator housing sits closer to water and damp soil than manufacturer spec ever imagined.
What does that mean for you as an owner here? It means the operator needs to be looked at as a marine installation, not just a piece of hardware bolted to a post. We check the board for moisture intrusion every time we service a unit east of US-1. We look at the hinge points, the fasteners, and the battery compartment before we even power the unit on. In a lot of Fort Lauderdale homes, the gate that fails is not the one with the most miles on it. It is the one that has been quietly rusting from the inside since the first hurricane season it lived through.
One repair that stays with us was a Mighty Mule MM560 on a canal-front swing gate in Victoria Park. Salt spray had corroded the control board, and the gate was stopping mid-cycle at least once a day. We replaced the board with an OEM unit, added a stainless steel housing cover, and upgraded the battery backup to handle storm-season outages. The gate has cycled clean through every storm since, and the owner no longer watches the driveway with her phone in her hand. That is the kind of fix we aim for, the one that holds up when the weather turns.
Mighty Mule Models & Products We Service in Fort Lauderdale
We work on the Mighty Mule MM360, MM560, FM700, and FM200. Those four families cover most of what is installed across Fort Lauderdale’s single-family gates, from older swing-arm units on 1950s and 60s homes in Coral Ridge to newer dual-arm operators on HOA-mandated driveway gates, including properties needing Mighty Mule repair in Plantation. We know the common failure points on each, and we know which parts are still available from Mighty Mule and which have been discontinued.
When a board or receiver is discontinued, we do not tell you to buy a whole new operator as a reflex. We keep a short list of aftermarket parts we have tested in this specific climate, ones that have stayed reliable for our customers. That is the advantage of a shop that does not sell one brand: we tell you the truth about your unit, because there is no sales quota attached to the recommendation.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Fort Lauderdale
Mighty Mule repair pricing here is driven mostly by the part, and less by the labor. For a Fort Lauderdale customer, you are looking at these ranges:
- Diagnostic and minor adjustments: $80 to $140, waived if you approve the repair on the spot.
- Control board replacement (OEM): $180 to $340 depending on the model.
- Battery backup replacement: $90 to $180, with higher-rated batteries recommended for storm-prone properties.
- Keypad or receiver replacement: $120 to $220, including weather sealing.
- Gate hinge or post repair with re-mounting: $150 to $400, depending on the damage and hardware.
Every quote is written and agreed before any work starts, and that is a line we do not bend. The free estimate includes a full inspection of your operator, your gate, and the way the two are mounted, because on a Fort Lauderdale salt-air property, the problem is rarely just the board. Call (855) 362-1433 for an exact quote on your Mighty Mule unit.
Serving Fort Lauderdale, FL — Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well, including Broward Estates Mighty Mule service calls. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Fort Lauderdale
Rain intrusion into the control board housing or a low-lying operator installation that sits in standing water is the usual cause. Fort Lauderdale’s high water table and heavy afternoon downpours mean water gets into places the manufacturer did not anticipate. We inspect the housing seal, check for water marks on the board, and re-mount the unit higher if needed. Call (855) 362-1433 for a diagnosis; most rain-related failures are repairable the same visit.
A Mighty Mule operator is not rated to hold a gate against hurricane-force wind. The gate itself needs proper wind-load hardware, and the operator should be disengaged during a storm. What we do is make sure the mounting points, hinges, and operator housing are strong enough not to become flying debris or a weak link when the wind picks up. If your gate is not braced correctly, we tell you before storm season, not after.
Every two to three years in our experience, and more often on properties that lose power repeatedly during hurricane season. Each power flicker drains and recharges the battery, and the heat plus humidity of this climate shortens its life. We test the backup under load during every service visit. A weak battery that seems fine on a clear day will fail exactly when you need it, which is during a storm outage.
In Fort Lauderdale, intermittent remote or keypad function is almost always water-related. Humidity works into the receiver enclosure, corrodes the antenna connection, or fills the keypad contacts with moisture. The result is a signal that works at noon and fails at six. We replace the receiver, seal the keypad, and test across repeated cycles to confirm the intermittent drop is gone. Call (855) 362-1433 and describe when it fails; that timing usually tells us exactly where to look.
It depends on whether the rust is on the board and motor or only on the housing and mount. We repair whenever the unit is structurally sound and the corrosion is cosmetic or limited to the housing, replacing the board and adding a sealed cover if the electronics have taken damage. We recommend replacement only when the corrosion has eaten through the motor housing, the board has failed beyond repair, or the repair cost is within 40% of a new unit. You will get a straight answer either way, because we install repairs and replacements, not a preferred product.
Service Areas Near Fort Lauderdale
Our Fort Lauderdale Mighty Mule service covers all the ZIPs in and around the city, including 33340, 33345, 33301, and 33302. We make regular runs into Mighty Mule service in Carol City, Mighty Mule service in Boulevard Gardens, Hollywood, Dania Beach, and Hallandale Beach. Need Mighty Mule work in another nearby neighborhood? Our Fort Lauderdale service area page lists the full cover map.
Book Your Mighty Mule Service in Fort Lauderdale Today
If your Mighty Mule gate is acting up, call (855) 362-1433. We offer free estimates, written quotes before any work starts, and fast response for repair calls across Fort Lauderdale. We are a dedicated gate shop, which means the person who answers knows Mighty Mule, and the person who shows up has parts on the truck. We also stock and service the full Mighty Mule range for Mighty Mule sales & service customers who need a full replacement. Call us today; if the gate is not working, there is a reason, and we will find it.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Fort Lauderdale and surrounding South Florida communities as an independent Mighty Mule service provider.