Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Terra Mar, FL | Hacienda Gate Repair
We repair Ghost Controls gate operators throughout Terra Mar, and we do it as an independent shop, not a manufacturer affiliate. The work here is different because the Atlantic salt air attacks Ghost Controls control boards, solar charge controllers, and hinge pins faster than the gate itself shows wear. That means a board that worked in April can green out by September. If your Ghost Controls opener is acting up, call Hacienda Gate Repair at (855) 362-1433 and we’ll send a tech who knows this brand and this coastline.
Why Terra Mar Residents Choose Us for Ghost Controls Service
Most gate companies in Broward County touch a Ghost Controls opener once in a while. We see them almost every week, specifically the TDS dual swing series and the AXS/AXTB single swing kits that show up on Terra Mar driveways and estate compounds, plus we offer Kendall Green Ghost Controls service. Our crew knows the control boards, battery harnesses, and arm geometry from the inside out. We are an independent repair shop, not affiliated with or authorized by Ghost Controls, and that matters because we diagnose what the brand actually does wrong in salt air rather than pushing a replacement kit you don’t need.
Roland Vega runs Hacienda Gate Repair as a dedicated gate shop. He grew up off Pembroke Road in Hollywood and has spent years watching the gated communities along this stretch of coastline multiply. He learned motors, controls, and hardware through the Construction and Electrical programs at McFatter Technical College in Davie before he ever touched a gate opener in the field. The crew’s focus is exclusively gates, so a Ghost Controls board issue gets diagnosed faster and with fewer return visits. For broader context on what we handle, see our Ghost Controls sales & service page.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Terra Mar
These are the failures we see most often on Ghost Controls systems in Terra Mar, and most of them trace back to one thing: salt.
- Solar charge controller and battery harness corrosion. Oceanfront Terra Mar properties get constant salt spray, which degrades the charge circuit on Ghost Controls solar kits with the 10W panel and battery box. The operator dies at dusk and the battery reads charged, but it can’t hold voltage under load. We replace the controller and repair the harness rather than condemning the whole kit.
- Control board terminal corrosion and phantom inputs. The low-voltage wiring terminals on Ghost Controls boards green out quickly in salt air. You get intermittent open and close, or the gate triggers on its own. This is the single most common Ghost Controls failure we fix in Terra Mar, and we carry compatible boards on the truck.
- Limit-switch and arm-connection drift. Hurricane-season wind loading and saltwater flooding knock swing arms and tube gates out of alignment. The operator stalls mid-travel or reverses at the limit. That’s a mechanical adjustment plus a corrosion check, and our techs do both in one visit.
- Receiver and remote pairing dropouts. Antenna connections corrode on beach-side post mounts, and moisture gets into the control enclosure. The remote stops working even though the board still has power. We replace the antenna connection, seal the enclosure, and repack terminals with marine-grade grease.
- Hinge pin seizure on heavy swing gates. Salt works into hinge pins on Terra Mar’s larger oceanfront gates until the motor can’t move the leaf. The gate groans, stalls, or trips the force setting. We stock stainless hinge pins specifically because this is a Terra Mar constant.
Ghost Controls Service in Terra Mar: What Local Conditions Mean for Your Equipment
Terra Mar’s ocean-side properties sit close enough to the surf that salt corrosion kills the operator’s control board and hinge pins before the gate leaf itself shows any wear. That’s the detail that shapes everything about Ghost Controls repair in this little enclave. You’ll see a powder-coated steel gate that still looks presentable while the board inside the control box is already losing terminals to green corrosion. A homeowner who checks the gate visually will miss it. That’s why our trucks carry corrosion-resistant control boards, solar charge controllers, stainless hinge pins, and marine-grade terminal grease as standard stock, not special-order items. If the gate isn’t working, there’s a reason, and it’s usually findable in under ten minutes. In Terra Mar, that reason usually involves salt and a terminal strip.
On an oceanfront estate compound in Terra Mar, our tech traced a Ghost Controls dual swing opener that kept dying at dusk to a corroded solar charge controller and green terminals on the control board. The battery tested fine, but the charge circuit couldn’t recover. We swapped in a corrosion-resistant board and controller, packed the terminals with marine grease, and replaced the rusted hinge pins with stainless. The gate ran clean through the next week of salt air.
Ghost Controls Models & Products We Service in Terra Mar
We work on the full Ghost Controls lineup you’re likely to find in Terra Mar: the Heavy-Duty Dual Gate Opener (TDS series), the DIY Single Swing Gate Opener (AXS/AXTB series), the solar-powered kits with 10W panels and battery boxes, and the tube-gate and slide operator kits for wider driveway spans. We also handle Lighthouse Point Ghost Controls service. If your system is a Ghost Controls, we service it. Our parts approach is simple: when the motor housing and gearing are sound, we repair. We install compatible control boards, charge controllers, and stainless hardware rather than pushing a full kit. We only recommend replacement when the operator housing or gearing is structurally gone.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Terra Mar
Ghost Controls in Pompano Beach Highlands follows similar pricing. In Terra Mar, repair cost varies by what failed. A control board swap on a single swing opener typically runs between $190 and $340 including the board and labor. Solar charge controller replacement lands between $140 and $260. Hinge pin replacement with stainless hardware runs $120 to $280 depending on gate weight and access. Full diagnostics with terminal cleaning and re-greasing starts at $75, and that’s credited toward the repair if you proceed. Every quote is agreed before any work starts. We don’t open a control box and surprise you with an invoice. Call (855) 362-1433 for an exact quote. Estimates are free.
Serving Terra Mar, FL — Our Local Coverage Area
We’re based in the Terra Mar area and know this community well, and we also provide Ghost Controls in Lauderdale-by-the-Sea. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Terra Mar
Yes, and faster than you’d expect. On ocean-side Terra Mar properties, the control board terminals and hinge pins corrode before the gate leaf shows any visible rust. We regularly see Ghost Controls boards with green terminals within 12 to 18 months of installation on properties within a few hundred feet of the surf. The fix is corrosion-resistant boards, marine-grade grease, and stainless hardware, not just a new operator. Call (855) 362-1433 if you’re seeing intermittent triggers or a battery that reads charged but dies by evening.
Yes, and that’s our default approach. If the motor and gearing are sound, we replace the failed board or controller. A Ghost Controls board swap is a same-visit fix in Terra Mar because we stock compatible boards on the truck. We only recommend a full replacement when the operator housing or gearing is structurally gone, which is rare compared to board and terminal corrosion. Call (855) 362-1433 and we’ll diagnose what actually failed before recommending anything.
In Terra Mar, it’s usually salt. Corrosion on the low-voltage input terminals creates phantom triggers, and moisture in the control enclosure makes it worse. We check the board terminals, clean them, pack them with marine grease, and reseal the enclosure. Sometimes a receiver pairing issue or a corroded antenna connection is the culprit, and we fix that the same visit. Call (855) 362-1433 before you assume it’s a programming quirk.
Yes. Wind loading and saltwater flooding during hurricane season knock Ghost Controls swing arms and tube gates out of alignment, which causes mid-travel stalling and limit reversals. We realign the arm geometry, re-torque the connections, and check for corrosion at the same time. If your gate got nudged by a storm, call (855) 362-1433 and we’ll get it back to smooth travel.
We stock them on the truck. Compatible Ghost Controls control boards, solar charge controllers, stainless hinge pins, and marine-grade terminal grease are standard stock on our Terra Mar trucks because salt corrosion is a constant here, not an occasional surprise. That means most Ghost Controls repairs in Terra Mar are same-visit fixes. Call (855) 362-1433 for a free estimate.
Service Areas Near Terra Mar
Beyond our work across the Terra Mar service area, we run Ghost Controls calls in Hollywood, Hallandale Beach, West Hollywood, Pembroke Park, Dania Beach, and Carver Ranches. If you’re a bit inland, we still see the same Ghost Controls boards and the same salt issues, just at a slower pace. We also cover Ghost Controls service in Hialeah Gardens and Ghost Controls service in North Lauderdale for clients managing multiple properties.
Book Your Ghost Controls Service in Terra Mar Today
Your Ghost Controls gate doesn’t need to sit dead through another salt-heavy week. Call Hacienda Gate Repair at (855) 362-1433 and we’ll schedule a Terra Mar service call. We’ll diagnose the problem, quote the repair before any work starts, and get your gate moving again.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Terra Mar and Broward County.