Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Washington Park, FL
Gate installation in Washington Park means working with the neighborhood’s older 1940s-1960s homes, where driveways run tight between houses and posts sit in sandy soil that shifts after every hard rain. We’re Hacienda Gate Repair, and we’ve served Washington Park since 2012. Our crew focuses exclusively on gates – swing gates, slide gates, manual and automated – so when you call (855) 362-1433, you get a technician who knows what a Washington Park gate actually goes through, not someone guessing at it.
Why Washington Park Homes Are Different
Washington Park’s housing stock was mostly built between the 1940s and 1960s, and the lots were laid out when cars were narrower and driveways were an afterthought. That means gate openings here rarely match a stock width from a big-box catalog. Posts are anchored into old concrete-block walls or straight into sandy soil, and South Florida’s year-round humidity works on metal hardware while summer downpours soften the ground around post footings. After a heavy rain, we regularly see gates along Washington Park’s narrow driveways start to drag or bind because a post shifted a quarter inch. The fix is usually re-setting the post, not adjusting the hinges. It’s a local pattern our technicians know to check first. Add hurricane-season wind loads that twist wood-frame gates and loosen weld joints on steel ones, and you get repair work that has to account for security, clearance, and drainage at the same time. In Washington Park, a gate is often the only thing separating a car from the neighbor’s wall six inches away – so when it sags or swings wide, the damage risk isn’t theoretical.
Styles & brands we work with
Our Main Washington Park Services
Most Washington Park homeowners call us for one of two reasons: a gate that won’t move the way it should, or an electric operator that quit responding. Here’s what each involves here.
Gate Repair in Washington Park
Manual and automated gate repair in Washington Park means diagnosing hinges, posts, latch alignment, and track wear on gates that sit inches from property lines. The sandy soil under those narrow driveways means a post that shifted after rain can make a gate drag even when the hinges are fine. We check the post footings first, then the hardware. Whether the gate won’t open, won’t close, or won’t stop swinging, we fix the structure and the mechanism in one visit. For a full breakdown of what repair covers in this neighborhood, see Gate Repair in Washington Park.
Electric Gate Repair in Washington Park
Electric gate repair here means diagnosing operator boards, limit switches, safety sensors, and remote receivers on systems exposed to Washington Park’s humidity and salt air. A motor that grinds but won’t cycle, a keypad that stopped accepting codes, a gate that reverses for no reason – those are the calls we handle most from this ZIP. We work on BFT, Linear, Viking, and Ghost Controls operators among others, and we don’t push a brand swap when a board repair is the right fix. For operator-level detail, see Electric Gate Repair in Washington Park.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Washington Park
New gate installation in Washington Park usually means building for a non-standard opening between two older homes, on a driveway that slopes toward the street for drainage. We size the gate to the actual measured opening, anchor new posts below the loose topsoil into stable ground, and set the swing or slide direction so it clears the house wall and the neighbor’s fence line. Full details on materials and process live on our Gate Installation page.
Automatic Gate Installation
Signs you need it
If you’re done getting out of the car to swing a gate open in the rain, or you want vehicle access control without a manual latch, automation is the answer.
What it costs in Washington Park
Automatic gate installation in Washington Park typically runs $2,400 to $9,800 depending on operator type, gate weight, and whether new posts are needed.
How we do it
We mount the operator arm or slide track, run the low-voltage power, set the open and close limits, and program remotes and keypads on-site.
Driveway Gate Installation
Signs you need it
When a gate has rusted through at the hinges, a post is too far gone to re-anchor, or the opening width demands a custom build, replacement beats another patch job.
What it costs in Washington Park
A new driveway gate in Washington Park typically ranges from $1,400 to $8,200 installed, with the spread driven by gate material, size, and whether automation is included.
How we do it
We measure the opening, set or re-set posts in concrete below the sandy layer, hang the gate, and dial in the swing or slide clearance for the tight lot lines.
What Gate Installation Costs in Washington Park
| Item | Typical range in Washington Park |
|---|---|
| Manual single swing gate | $1,400 – $4,200 |
| Automatic swing or slide gate | $2,400 – $9,800 |
| Post replacement or re-setting | $400 – $1,100 per post |
Do I need a permit for a new gate in Washington Park?
Most single-family gate replacements in Washington Park don’t require a permit, but automation and any post work near the property line may trigger a local review. We check the current City of Fort Lauderdale requirements before we quote, so there are no surprises mid-job.
How long does a gate installation take in Washington Park?
Plan on one to two days for most manual gates, and two to three days when automation, new posts, or custom-width fabrication is involved. Sandy soil post-setting needs extra cure time before we hang weight on the hinges.
Brands We Service in Washington Park
We service BFT, Linear, Viking, and Ghost Controls among the nine operator brands we work on daily. Our trucks carry common boards, remotes, and safety sensors for these lines, so many Washington Park calls get fixed on the first trip. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Washington Park, FL
| Service | Typical range in Washington Park |
|---|---|
| Manual gate repair | $180 – $640 |
| Electric gate repair | $220 – $720 |
| Operator replacement | $950 – $2,800 |
| New keypad or remote programming | $120 – $350 |
| Gate post re-setting | $400 – $1,100 per post |
| Manual gate installation | $1,400 – $4,200 |
| Automatic gate installation | $2,400 – $9,800 |
| Hinge and latch replacement | $90 – $280 |
The two things that push Washington Park quotes higher are post work in sandy soil and custom-width fabrication for those older narrow driveways. Whatever the number is, you approve it before we start – no invoice bigger than the quote, ever.
Neighborhoods We Serve in Washington Park
We cover the full 33311 ZIP and the streets throughout Washington Park, including the residential blocks off Northwest 6th Court, Northwest 8th Avenue, and the smaller side streets where driveways run tightest. Our typical response to a Washington Park gate call is same-day or next-day depending on when you reach us and what parts the job needs.
- Washington Park core residential blocks
- Northwest 6th Court corridor
- Northwest 8th Avenue area
- Homes along Northwest 13th Street
- West side of the 33311 ZIP
Service Area – Cities Near Washington Park
We handle gate work in the neighborhoods around Washington Park, including Boulevard Gardens, FL, Rock Island, FL, Roosevelt Gardens, FL, and Broward Estates, FL. If your gate is acting up and you’re anywhere in this part of Broward County, call us and we’ll tell you straight whether it’s a quick fix or a bigger job.
Serving Washington Park, FL — Our Local Coverage Area
We’re based in the Washington Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Washington Park
Most Washington Park repair calls are scheduled same-day or next-day. Automated gate issues where the gate is stuck open get priority, because we know an open gate on a narrow lot means a security gap that can’t wait. Call (855) 362-1433 as soon as you notice a problem.
We build to the specs your HOA or community association provides, and we’re used to working with the older Washington Park associations that require specific gate heights or materials. We’ll help you get the measurements and material details for the application, but the approval itself comes from the association.
Yes. Most of the gates we repair in Washington Park were installed years ago, often by a fencing company or a previous owner. We work on the gate that’s in front of us, regardless of who built it, and we service nine operator brands so the automation can be diagnosed rather than swapped blindly.
If your gate won’t open, won’t close, or won’t stop where it should, call Hacienda Gate Repair at (855) 362-1433 for a free estimate. We know Washington Park’s narrow lots, sandy post holes, and older gate hardware, and we’ll give you an upfront price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Washington Park Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Mendoza"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniela Garcia"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman