Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Key Biscayne, FL | Hacienda Gate Repair
We provide independent Ghost Controls gate repair across Key Biscayne, from the Tiger solar swing arms on estate driveways to AXOe slide operators on gated community entrances. What makes our Ghost Controls work different here is simple: we treat salt corrosion as the primary failure point, not an afterthought. If your Ghost Controls opener quit after a storm or runs but won’t hold its limit, call (855) 362-1433 and we’ll diagnose it on site.
Hacienda Gate Repair is a dedicated gate shop, not a general contractor that also touches gates. We service nine operator brands including Ghost Controls, and we’ve worked on enough of their boards, battery harnesses, and arm assemblies to know what fails on this island and why. For full Ghost Controls sales & service support across Key Biscayne service area, we’re the crew that shows up with the right parts on the truck.
Why Key Biscayne Residents Choose Us for Ghost Controls Service
Roland Vega grew up off Pembroke Road in West Lake and spent years watching South Florida’s gated communities multiply, along with the operators that fail in them. He learned motors and controls through the Construction and Electrical programs at McFatter Technical College before touching a gate opener in the field, and that foundation shows in how we troubleshoot. If the gate isn’t working, there’s a reason, and it’s usually findable in under ten minutes.
Key Biscayne homeowners call us because we know Ghost Controls equipment without reaching for a manual. We fit the right boards, limit switches, and battery harnesses rather than guessing, and we service the mechanical side too: seized hinges, rust-pitted frames, and corroded mounts that a mainland operator swap would skip. One call covers the gate and the operator. We’re independent of Ghost Controls and every other brand we service, which means our loyalty is to the fix, not to a manufacturer’s replacement cycle.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Key Biscayne
- Salt-corroded terminal blocks and battery harnesses on solar swing operators. Key Biscayne’s ocean air deposits salt on exposed electrical connections inside the control box and along the battery harness. A Ghost Controls Tiger arm that ran fine in spring will short out or throw a low-battery fault after a storm’s salt spray. We replace corroded terminals with sealed connectors and marine-grade wiring.
- White corrosion blooming inside control-box push buttons and limit switches. The island’s humidity works its way into the enclosure and attacks the internal switches. The result is an arm that runs but won’t stop at the open or closed limit, or that cycles erratically. We open the box, clean or replace the limit switches, and reseal the enclosure properly.
- Remote and keypad failures while the operator itself is healthy. Sun and salt embrittle the plastic housings on Ghost Controls remotes and keypads, and the keypad membrane corrodes until entry codes go intermittent. Owners often assume the operator died when the arm is actually fine. We test the operator first, then replace the failed accessory rather than selling a new opener.
- Storm-driven saltwater intrusion into solar charge controllers and backup batteries. After a hurricane or tropical storm, we routinely find charge controllers and backup batteries shorted by saltwater that got pushed into the enclosure by wind-driven rain. The arm reads as dead when the motor is fine. We diagnose the charge path before condemning anything.
- Seized hinges and rust-pitted hardware that bind the gate and strain the operator. Many Key Biscayne estate gates were hung in the 1980s through 2000s on mild-steel hinges and fasteners. Salt air pits and seizes them until the Ghost Controls arm is fighting the gate itself. We replace hinges, re-weld mounts, and free the gate so the operator isn’t overworking on every cycle.
Ghost Controls Service in Key Biscayne: What Local Conditions Mean for Your Equipment
Here’s what mainland Ghost Controls pages never mention: the 1980s through 2000s estate gates across Key Biscayne were typically hung on mild-steel fasteners and hinges that pit and seize fast in salt air. On a Ghost Controls call here, we routinely end up replacing corroded hinges and re-welding mounts before the operator can be tuned properly. A technician who only swaps the board or the arm misses the gate binding against its own hardware, and the new operator fails again within a season. Out in Harbor Point, where ocean exposure is direct, a homeowner’s Ghost Controls Tiger solar swing arm had quit after a storm: the arm ran but wouldn’t hold at the open limit, and the control box was crusted white inside. We replaced the corroded limit switch and battery harness with sealed stainless hardware, dried and resealed the enclosure, and the gate cycled cleanly through open, hold, and close on both remotes. That’s the difference between treating the symptom and treating the island.
Ghost Controls Models & Products We Service in Key Biscayne
We work on the full Ghost Controls line you’ll find on Key Biscayne properties: the Tiger single-gate solar opener arm kits, AXOe and AXO solar slide-gate openers, heavy-duty dual-gate operator kits, and the keypad, remote, and battery-backup accessory line. For genuine Ghost Controls sales & service repairs, we fit OEM boards, limit switches, batteries, and arm assemblies where the factory part is the reliable fix, and we switch to marine-grade stainless fasteners and sealed connectors where island corrosion demands better than stock. Most Ghost Controls arms and boards are worth rebuilding rather than replacing. A rust-pitted frame or seized hinge gets called out honestly instead of masked by a new operator bolted to failing steel.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Key Biscayne
Ghost Controls repair in Key Biscayne varies by what failed, but here’s how the costs break down:
- Service call and diagnosis: $75 to $125, credited toward the repair if you proceed.
- Limit switch or terminal block replacement: $120 to $220.
- Control board replacement: $180 to $350 depending on model.
- Battery harness or charge controller repair: $110 to $260.
- Hinge replacement and gate re-alignment: $200 to $450 depending on gate weight and weld work.
- Full arm replacement (Tiger or AXOe): $400 to $800 installed.
What drives cost here is corrosion, in the form of seized hardware that must be cut or welded out. You get a written price before any work starts, and our estimates are free. Call (855) 362-1433 for an exact quote on your Ghost Controls system.
Serving Key Biscayne, FL — Our Local Coverage Area
We’re based in the Key Biscayne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Key Biscayne
Storm-driven rain and saltwater intrusion typically short the charge controller or backup battery inside the operator enclosure, and salt spray corrodes the exposed terminal blocks on the battery harness. The arm reads as dead when the motor is often fine. We test the charge path and the battery first, then replace only what’s actually failed. Call (855) 362-1433 and we’ll diagnose it on site.
Yes, if the enclosure is sealed correctly and the hardware around it is up to the job. The operator itself can hold up for years, but the factory fasteners and hinges on the gate often can’t. We reseal control boxes against humidity and swap mild-steel hardware for marine-grade stainless so the operator isn’t fighting corrosion on two fronts.
Usually not. Key Biscayne sun and salt embrittle the remote and keypad housings and corrode the keypad membrane, so the operator keeps running fine while the entry devices go intermittent. We test the operator first and replace the failed accessory rather than condemning a healthy arm.
We repair both. Most Ghost Controls Tiger and AXOe arms and boards are worth rebuilding, and we stock the OEM boards, limit switches, and battery harnesses to get your system cycling again. We recommend replacement only when the arm assembly is rust-compromised or the frame has failed, and we’ll show you why rather than just quoting a swap.
Yes, and this is one of the few places where we’d argue for it strongly. Key Biscayne loses power during tropical storms and hurricanes, and a gate without backup becomes a dead weight exactly when you need it to move. A battery backup keeps the operator functional through outages and storm surges. Call (855) 362-1433 for a free estimate on adding backup to your system.
Service Areas Near Key Biscayne
Beyond Key Biscayne, we run Ghost Controls repair calls into Hollywood, Hallandale Beach, West Hollywood, Pembroke Park, Dania Beach, and Carver Ranches. If you’re a bit north of the island, see our Ghost Controls service in Sweetwater page. Further up toward Broward, check Ghost Controls service in Boca Pointe for coverage details.
Book Your Ghost Controls Service in Key Biscayne Today
Your Ghost Controls gate is a security barrier first and a convenience second, and on Key Biscayne it’s also fighting the ocean every day. Motor repair, battery backup, weld and rust repair, and full operator diagnostics: that’s what we do. Call Roland Vega and the Hacienda Gate Repair crew at (855) 362-1433 for a free estimate, and we’ll get your gate cycling again.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Key Biscayne with dedicated gate repair and Ghost Controls service.