Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Tedder, FL | Hacienda Gate Repair
We repair Ghost Controls gate openers throughout Tedder, and the calls we get here follow a pattern: an actuator that ran fine all winter starts binding after the first heavy summer rains, or a battery backup that died right when the power kicked out. Our shop is independent of Ghost Controls, which means we diagnose the entire gate system, not just the control box. If your Ghost Controls gate won’t open, won’t close, or faults out halfway, call us at (855) 362-1433 and we’ll send a technician who knows this brand and this neighborhood.
Why Tedder Residents Choose Us for Ghost Controls Service
Most gate companies in northeast Broward County work on whatever shows up. We don’t. Our crew has been elbow-deep in Ghost Controls control boards, linear actuators, and keypad receivers since the brand became popular with DIY installers across Broward County, so we know exactly which connectors, limit switches, and battery harnesses fail first. Tedder homeowners call us because we show up already knowing the AXS series from the TSS series, and we don’t guess.
Roland Vega, our owner, grew up off Pembroke Road in the West Lake neighborhood of Hollywood and learned motors, controls, and hardware through the Construction and Electrical programs at McFatter Technical College in Davie. That background means our techs understand why a motor stalls under load, not just that it stalled. For Tedder specifically, we stock the Ghost Controls parts that fail most often in coastal air: actuator rods, battery harnesses, and keypad receivers. We’re a dedicated gate shop. One call covers the gate and the operator.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Tedder
Most Ghost Controls failures we see in Tedder fall into a few categories, and the local climate makes each one worse. Here’s what we fix most often:
- Salt-pitted actuators that seize mid-stroke. The aluminum housing on a Ghost Controls swing arm looks fine from ten feet away, but up close the rod has pitted from salt spray and the arm stalls halfway through its travel. This is the single most common Tedder failure, especially on homes within a few blocks of the Intracoastal. We free the rod, lubricate the stroke, and replace the actuator when the housing is too far gone.
- Control-board corrosion from humidity and storms. Terminals green up, the board throws false obstruction faults, or the gate refuses to reverse when it should. Tedder’s seasonal downpours push moisture into enclosures that were never sealed for this kind of humidity. We test the board, clean or replace terminals, and re-seal the enclosure so the same problem doesn’t come back in six weeks.
- Battery-backup harness and solar-charge leads cracking in UV. South Florida sun degrades the insulation on these leads faster than inland. The result: a homeowner thinks the backup battery will carry the gate through a summer storm outage, and the gate is dead when they need it. We replace the harness, test the charge circuit, and make sure the battery actually holds a load.
- Keypad and remote receivers dead after lightning-adjacent surges. The gate runs from the wall button but ignores every wireless entry device. We see this after afternoon thunderstorms in Tedder. We diagnose the receiver, replace what’s fried, and re-sync the remotes and keypad.
- Gate post settling and side-loading the arm. This one looks electrical but isn’t. On canal-front lots in Tedder, the ground settles after heavy rain and the post shifts just enough that the Ghost Controls arm binds at the hinge. We re-shim the post and hinge, reset the limit switches, and the operator runs clean again.
Ghost Controls Service in Tedder: What Local Conditions Mean for Your Equipment
Tedder’s canal-front lots in ZIP 33064 settle after heavy summer rain, and that’s the detail that separates a quick fix from a repeat call. A Ghost Controls swing arm that was perfectly aligned in the dry season starts binding at the post hinge after a few weeks of downpours, because the post itself has moved. Homeowners read the fault as a bad board or a weak motor. It usually isn’t. The gate anchoring is the problem, and any repair that doesn’t address it will fail again by September.
We saw this on a canal-front lot off the Lighthouse Point pocket in Tedder, where a homeowner’s Ghost Controls dual-swing kit would open halfway and fault out every afternoon. We found the salt-pitted actuator rod dragging, and the gate post had settled just enough after the summer rains to side-load the arm. We freed and lubricated the rod, re-shimmed the hinge and post, and reset the limit switches so both leaves ran clean again. That’s a repair you only get right if you check the whole system, not just the parts that blink.
Ghost Controls Models & Products We Service in Tedder
We work on the full Ghost Controls line: the Heavy-Duty Single Swing (AXS series), the Standard Duty Single Swing (TSS series), the Dual Swing kit (TDS series), and the tube-gate and slide-compatible linear arm kits. See how we handle Ghost Controls sales & service across Broward County for the broader picture.
Parts-wise, we use Ghost Controls OEM boards, actuators, and harnesses when the housing and gearing are still serviceable, and quality aftermarket arms, batteries, and keypads when the OEM part is cost-prohibitive on an older unit. Our Kendall Green and Tedder trucks carry the actuators, harnesses, and receivers that fail most often in salt air, which means less waiting on parts. If the actuator housing is cracked or the gate leaf has sagged enough to side-load the arm, we’ll tell you straight whether a rebuild makes sense or whether the money is better spent on a fresh operator and hinge repair.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Tedder
Ghost Controls repair in Tedder typically runs $180 to $340 for common failures like a seized actuator rod, a corroded battery harness, or a fried keypad receiver. A full actuator replacement on a dual-swing system can push higher, into the $500 to $850 range, depending on which arm and whether the gate leaf itself needs hinge work. The quote you get before we start is the price you pay. We don’t open the job and pad the invoice afterward.
What drives cost: whether the actuator housing is still serviceable, whether the post has settled enough to need re-shimming, and whether the control board survived the same moisture that killed the arm. A free estimate covers all of it. Call (855) 362-1433 and we’ll put a number on it before any work begins.
Serving Tedder, FL — Our Local Coverage Area
We’re based in the Tedder area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Tedder
Usually not. In Tedder’s salt air, the more common cause is a pitted actuator rod that drags mid-stroke, or a gate post that has settled after heavy rain and is side-loading the arm. The board often still lights up fine. We test the board, the arm, and the hinge before replacing anything. Call (855) 362-1433 for a diagnosis – the estimate is free.
In most Tedder cases, the battery itself is fine but the harness or solar-charge lead has cracked from UV exposure and no longer passes a charge. The battery drains during an outage and never refills because the charge circuit is broken. We replace the harness, test the charge circuit, and load-test the battery. Call (855) 362-1433 to schedule a free estimate.
Yes. Lightning-adjacent surges in Tedder, especially during summer afternoon storms, commonly fry the wireless receiver while the gate still runs from the wall button. We diagnose the receiver, replace it if needed, and re-sync your keypad and remotes. Call (855) 362-1433 and we’ll get it sorted.
What you’re describing is almost always a hinge or post problem, not an operator problem. Salt spray near the Intracoastal pits aluminum hinges even when the gate face still looks new, and canal-front lot settling shifts the post enough to bind the swing arm. We re-shim the hinge and post, then reset the Ghost Controls limit switches. Call (855) 362-1433 for an exact quote.
Yes, and those are some of our most frequent calls in ZIP 33064. Canal-front ground settles after heavy summer rain, which means the post moves and the swing arm binds. That’s a Tedder-specific problem we handle regularly. If the gate isn’t working, there’s a reason – and it’s usually findable in under ten minutes. Call (855) 362-1433 to schedule a free estimate.
Service Areas Near Tedder
Beyond Tedder, we run Ghost Controls service calls into Hollywood, Hallandale Beach, West Hollywood, Pembroke Park, and Dania Beach. We also cover nearby communities like Ghost Controls service in Pompano Beach Highlands and Ghost Controls service in West Miami. See our Tedder service area page for the full coverage map.
Book Your Ghost Controls Service in Tedder Today
If your Ghost Controls gate is faulting, binding, or ignoring the keypad, call Hacienda Gate Repair at (855) 362-1433. Same-day service is available in Tedder for most repairs, and every estimate is free. We quote the price before the work starts, so there’s no guesswork on the invoice.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Tedder and northeast Broward County.