Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in Oakland Park, FL | Hacienda Gate Repair
We provide independent Mighty Mule gate repair across Oakland Park’s 33334 ZIP code, from Dixie Highway to the residential streets off Oakland Park Boulevard. One fact separates our Mighty Mule service here from anywhere else: most of the units we repair in Oakland Park are bolted to pool-enclosure gates that double as code-compliant safety barriers, so every operator repair includes a latch and closing-force check. We carry the boards, arms, limit switches, and batteries these DIY-market openers need. Call (855) 362-1433 for service that treats the operator and the gate as one system.
Why Oakland Park Residents Choose Us for Mighty Mule Service
Hacienda Gate Repair is a dedicated gate shop, not a general contractor that also looks at openers. Our team works on nine gate operator brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – which means when your Mighty Mule misbehaves, we’re comparing its failure pattern against hundreds of other operators we’ve serviced, not guessing from a YouTube video. That cross-brand experience matters on Mighty Mule sales & service calls because these openers share some parts logic with other DIY-market brands but have their own control board quirks.
Roland Vega grew up off Pembroke Road in West Hollywood and learned motors and controls at McFatter Technical College in Davie before running Hacienda as a pure gate shop. He’s worked on Mighty Mule units since the single-panel M350 and MM500 days. If the gate isn’t working, there’s a reason – and it’s usually findable in under ten minutes.
Styles & brands we work with





Common Mighty Mule Gate Repair Problems We Solve in Oakland Park
- Gate beeps but won’t move after a storm. This is almost always the control board or battery-charging circuit on older M350 and MM500 units. Oakland Park’s summer brownouts and lightning-adjacent surges take out the charge controller, leaving the battery too weak to drive the arm even though the board still powers up and beeps.
- Swing gate reverses halfway or stops short of the latch. On Oakland Park’s 1950s and ’60s ranch homes, Mighty Mule swing arms are typically mounted to aging concrete block piers. Heat-softened concrete settles, bolts back out, and the limit-switch geometry drifts until the gate reverses before full travel. We re-anchor, re-shim, and re-set travel limits.
- Dead battery despite a working solar panel. Salt-laden coastal air and high humidity corrode battery terminals fast on solar-capable Mighty Mule EZGO and E-Z Gate units. You’ll see swollen gel-cell batteries and green-crusted terminal posts. Oakland Park kills these batteries faster than dry-climate installs, so we replace with quality aftermarket gel cells and seal the connections.
- Slide gate grinds or jumps the track. FM700 and FM600 slide openers on Oakland Park’s narrow driveway gates accumulate debris in hurricane prep season. Pinch-rollers wear, chains stretch, and a single branch dragged under the gate can throw the whole unit out of alignment. We inspect the full track run, not just the motor.
- Pool gate won’t self-close or latch. Since Oakland Park enforces Broward County pool barrier code strictly, any Mighty Mule arm on a pool-enclosure gate must close and latch on its own. When the operator still works but the gate hangs open six inches, that’s a code violation. We adjust closing force and verify latch engagement on every pool gate service call.
Mighty Mule Service in Oakland Park: What Local Conditions Mean for Your Equipment
Oakland Park is a densely built-out mid-century town where most gate work is retrofits onto narrow single-car driveways and existing fence lines, not new construction. The housing stock is largely 1950s-1970s concrete-block ranches and small duplexes, which means the piers and posts your Mighty Mule arm mounts to have been holding since before these openers existed. Add salt-laden subtropical air, intense summer sun, and hurricane-season wind loads, and you get a specific failure pattern: steel hinges and arm bolts corrode and seize while aluminum finishes chalk, and a unit that passed inspection in January can be sagging and failing to latch by August. We were called to a mid-century ranch off Oakland Park Boulevard where a Mighty Mule MM560 dual-swing opener had stopped fully closing after the summer rains. Our tech found the arm-mount bolts had backed out of the aging block pier and a corroded limit switch was sending the gate into reverse, so we re-anchored and re-shimmed the arm, replaced the limit switch, and re-set the open/close travel – the gate now latches solidly every cycle.
Mighty Mule Models & Products We Service in Oakland Park
We service the full Mighty Mule residential lineup: the M350 and MM350 single-swing openers, MM560 and MM572 dual-swing models for double gates, the FM700 and FM600 slide-gate openers, and the EZGO / E-Z Gate solar-capable units. Our parts approach depends on the part: we use OEM Mighty Mule control boards, arms, and limit switches where they’re still in production, and quality aftermarket batteries and hardware where OEM is overpriced or discontinued. For older units with discontinued boards and repeated faults, we’ll tell you straight whether a repair or a replacement operator makes more sense. We keep common Mighty Mule boards and batteries stocked for faster Oakland Park turnaround – no waiting a week for a part to ship.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in Oakland Park
Mighty Mule gate repair in Oakland Park typically runs $55-$85 for a service call with diagnostic, $150-$350 for most board, battery, and limit-switch replacements on residential swing units, and $40-$150 for re-anchoring an arm or re-setting travel limits on an older block pier. The final price depends on which model you have and whether multiple components failed at once – battery plus board plus a corroded terminal block costs more than a single part. Every job includes a quoted price before work begins, and you’ll never see an invoice bigger than what we agreed to. Call (855) 362-1433 for a free estimate on your Mighty Mule repair in Oakland Park.
Serving Oakland Park, FL — Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in Oakland Park
A gate that reverses halfway usually has a limit-switch or travel-setting problem, often caused by arm-mount bolts backing out of an aging Oakland Park block pier. We re-set the limits and re-anchor the arm so the gate travels fully and latches. Call (855) 362-1433 and we’ll find the cause in one visit.
In Oakland Park’s salt air and humidity, battery terminals corrode and gel-cell batteries swell, especially on solar-charged EZGO units. The solar panel may be fine but the battery can’t hold a charge. We replace with sealed aftermarket gel cells and protect the connections. Call for a free diagnostic at (855) 362-1433.
Yes – part of every Oakland Park pool gate service call is verifying self-closing and self-latching operation per Broward County pool barrier code. We adjust the Mighty Mule operator’s closing force and confirm the latch engages, so the gate remains a legal barrier. We also offer Mighty Mule repair in Wilton Manors. Call (855) 362-1433 if your pool gate is hanging open or failing to latch.
Some M350 and MM500 control boards are still available as OEM stock, and for discontinued parts we source quality aftermarket boards and batteries that match the unit’s voltage and travel logic. We’ll also tell you honestly if a repair is throwing good money after bad. Call (855) 362-1433 to discuss your older unit.
Yes, if the pier is solid enough to anchor the arm properly – and most Oakland Park block piers from the ’50s and ’60s are. We reinforce or re-anchor the mount as needed and set the travel so the gate opens fully against a fence line without binding. Call (855) 362-1433 for a free assessment.
Service Areas Near Oakland Park
We provide Oakland Park service area coverage across Broward, including Mighty Mule service in Country Club and Mighty Mule service in Lauderdale Lakes. We also serve Hollywood, Hallandale Beach, Pembroke Park, Dania Beach, and Carver Ranches.
Book Your Mighty Mule Service in Oakland Park Today
Whether your Mighty Mule is dead, reversing, or just making a noise it shouldn’t, call (855) 362-1433 for same-day Mighty Mule gate repair service in Oakland Park or Mighty Mule in Lauderdale-by-the-Sea. Estimates are free and the price is agreed before we start.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Oakland Park.