Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Coral Terrace
Electric gate repair in Coral Terrace usually takes one visit. Most operator failures, stuck swing gates, and dead keypads are diagnosed and fixed the same day, and you’ll know the price before our tech picks up a tool. Call (855) 362-1433 for a free estimate.
We work the tight lots along Coral Way and SW 40th St every week. Gate posts set inches from a block wall, salt-corroded hinges, operators that have been holding a heavy iron gate for thirty years – those are the jobs that come to us. If your gate won’t open, won’t close, or won’t stop, that’s an electric gate repair call, not a guess.
Why Hacienda Gate Repair Is Coral Terrace’s Preferred Electric Gate Repair Company
Coral Terrace homes were mostly built between the 1950s and 1970s. The gates those homes came with were never meant to carry automation – they were manual swing gates on masonry pilasters. Adding or repairing an electric operator on that setup is different from working on a new subdivision install. We know because we’ve done it on almost every block off Coral Way and SW 40th St.
Our team is led by Roland Vega, and every service call we run is gate-specific. No split focus between fences, garage doors, or general handyman work. When you call about a BFT operator that won’t respond or a Viking keypad that’s dead, the tech who shows up works on those brands regularly. That matters in Coral Terrace, where a wrong diagnosis on a tight-clearance gate means more damage to the masonry or the neighbor’s wall.
Coral Terrace homeowners call us because the gate and the operator get fixed in one visit. We don’t send you to an electrician for the power side or a welding shop for the hinge plate. One call covers the gate and the operator.
Styles & brands we work with
Gate Access Control in Coral Terrace
Gate Access Control in Coral Terrace means more than the opener – it’s the full entry system: keypads, intercoms, remote receivers, safety photocells, loop detectors, and control boards. On the older ranch homes here, access control is often a mix of original keypads and newer remotes retrofitted over time, which creates compatibility issues you won’t find in newer construction.
A typical gate access control repair in Coral Terrace runs $180 to $420 for a keypad or receiver replacement, and $350 to $750 when the control board or multiple safety devices need work. If we’re adding keypad entry to an existing operator, that’s usually $450 to $900 with parts and programming.
Keypad and remote integration
Many Coral Terrace gates have an original hardwired keypad that still works, but the homeowner can’t get new remotes to pair with it. We handle that. We carry receivers compatible with the major brands, and we can retain the existing keypad while adding modern remote access. The fix is often a receiver swap, not a full system replacement.
Safety sensor upgrades for UL 325 compliance
Older gate systems in Coral Terrace were installed before current safety standards. If your gate has no photocells or the loop detector doesn’t reverse the gate on contact, that’s a liability and a safety problem. We add photo eyes, edge sensors, and properly tuned loop detectors as part of the repair, not as an upsell.
Commercial Gate Operator in Coral Terrace
Commercial Gate Operator work in Coral Terrace covers small apartment buildings, duplex driveways, and the occasional HOA-controlled entrance off SW 40th St. The operators we service here are typically mid-range slide and swing models – often a Linear or BFT – that see far more cycles per day than a single-family gate, so the wear patterns are different.
A typical commercial gate operator repair in Coral Terrace runs $300 to $650 for common fixes like limit switch replacement, capacitor failure, or receiver issues. Full operator replacement on a commercial slide gate, including removal of the old unit and re-wiring, runs $1,800 to $4,200 depending on operator weight class and whether the control enclosure needs upgrading.
High-cycle operator repairs
Commercial gates in Coral Terrace run dozens of cycles daily, often more in rental properties with multiple units sharing one entrance. That duty cycle cooks capacitors and wears out limit switches at a rate residential gates never see. We diagnose the specific failure and replace with parts rated for the actual cycle load.
Access control integration for multi-unit properties
Property managers in Coral Terrace often need a gate that works with tenant keypads, dial-in intercoms, or app-based entry. We service the operator and the access control as one system. If you’ve been told to call a gate company and a separate access control vendor, that’s two trucks for one problem. We handle both on one visit.
Trusted Brands We Service in Coral Terrace
We carry parts on the truck for the brands Coral Terrace actually has on its gates: BFT, Linear, Viking, and Ghost Controls show up most often on the swing gates and slide gates in this neighborhood. We also service LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule. Because we’re a dedicated Electric Gate Repair team, we don’t push one brand when another is the right fix. We repair what you have, and we stock diagnostic parts locally so most repairs are single-visit.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Coral Terrace Homes
- Corroded operator internals from salt air. Coral Terrace sits close enough to the coast that the marine air gets into control boards and relay contacts. We see intermittent operation that traces back to green corrosion on terminals, not a control board failure.
- Gates binding against masonry pilasters. The original iron gates on 1950s Coral Terrace ranches were hung on piers that have shifted over 60 years. When we add or repair an operator, the gate often binds because the pier has moved, not because the operator is weak.
- Misaligned photo eyes in tight side yards. Narrow lots off Coral Way mean the gate swings close to the house wall or the neighbor’s fence. Photo eyes get knocked out of alignment by vegetation, wind, or the gate itself. The gate then refuses to close or reverses for no visible reason.
- Dead keypads from humidity and sun exposure. Coral Terrace sun and humidity kill keypads faster than the operator. We replace keypads frequently, and on west-facing gates in Coral Terrace we recommend weather-sealed enclosures, which lasts far longer than the standard keypad housing.
Pricing for Electric Gate Repair in Coral Terrace, FL
Here’s what you can expect in Coral Terrace, and we confirm the exact price before any work starts.
- Diagnostic service call: $85 to $125, waived if you proceed with the repair.
- Gate motor repair: $200 to $450, including common parts like capacitors, limit switches, and drive belts.
- Opener replacement (residential swing): $900 to $1,800 for a complete operator swap with new remote and safety photocells.
- Keypad replacement or receiver repair: $180 to $420.
- Control board replacement: $300 to $650 depending on brand and board availability.
- Safety sensor (photocell or edge) repair: $150 to $350 per sensor.
The big variable in Coral Terrace is gate condition. An iron gate that’s been hanging on salt-corroded hinges far longer than it should have will need hinge and post work before an operator can run smoothly. We tell you that up front and price it in the written estimate before you approve anything. Call (855) 362-1433 for a free estimate.
We Also Serve Cities Near Coral Terrace
Our gate repair routes cover Coral Terrace plus the neighborhoods that touch it: Flagami, West Miami, Westchester, and Glenvar Heights. If you’re just outside the 33155 ZIP area, call anyway – we’re often working nearby. Our team regularly handles Electric Gate Repair in Coral Terrace and the surrounding blocks in the same afternoon.
Serving Coral Terrace, FL — Our Local Coverage Area
We’re based in the Coral Terrace area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Coral Terrace
Yes, and that’s one of the most common situations we work on in Coral Terrace. Tight post clearances mean we often fabricate shorter actuator arms, offset brackets, or re-engineered hinge plates rather than using stock parts. We recently repaired a LiftMaster swing gate on a 1950s ranch off SW 40th St where the post sat four inches from the neighbor’s wall. The limit switch had failed and the gate over-traveled into the masonry pier. We replaced the switch, reset the travel limits, added a safety photocell, and custom-fabricated a shorter actuator arm to clear the wall. That’s a standard fix for us, not a special project. Call (855) 362-1433 and we’ll give you an exact price before starting work.
For wide or heavy gates in Coral Terrace, you need an operator rated higher than the gate’s actual weight and length – not one that’s just barely adequate. Linear and BFT both make swing and slide operators in the duty classes we install here. Coral Terrace isn’t farm country, but long narrow lots with extended driveways off SW 40th St often have wider-than-standard driveway openings. A gate over 14 feet or over 400 pounds needs a heavy-duty slide operator or a properly sized swing ram with a robust hinge setup. We’ll spec the right unit for the gate’s weight, not the gate’s width alone. Call us for a free measure and a written recommendation.
Test them every 30 to 60 days, and after any significant wind event. Coral Terrace’s humidity and marine air corrode sensor wiring faster than inland areas, and hurricane-season wind knocks photo eyes out of alignment. A quick test: block the photo eye with your hand while the gate is opening – the gate should reverse or stop. If it doesn’t, that’s a safety defect that needs repair now, not later. UL 325 requires the gate to have functioning entrapment protection, and it’s a legal liability if it doesn’t.
Because the post, not the hinge, is usually the problem in Coral Terrace. Your 1950s or 1960s concrete-block piers or iron posts have shifted over decades, and the new hinges are just bolting onto a moving structure. We also see welded repairs on old wrought-iron gates that stretch and fail because the metal itself is thinned from salt corrosion. The fix is rebuilding or bracing the post, then re-hanging the gate with a reinforced hinge plate. If you’ve replaced hinges twice and it still sags, call us – there’s a structural issue that new hinges won’t solve.
Yes. We work on old hardwired keypads, newer wireless keypads, intercoms, and receiver systems on the gates in Coral Terrace’s 1950s-1970s housing stock. Many older systems can be repaired rather than replaced, and when replacement is the right call, we install a modern keypad compatible with your existing operator. We handle the programming, the wiring, and the safety devices in one visit. Call (855) 362-1433 for a free estimate on your specific setup.
If your gate in Coral Terrace is stuck, grinding, or dead, call Hacienda Gate Repair at (855) 362-1433. We’ll give you a straight diagnosis, a written price, and a fix that holds up in South Florida’s salt air. Free estimates, no obligation.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Coral Terrace and the surrounding area.