Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lauderdale Lakes, FL
Gate installation in Lauderdale Lakes means working with a housing stock that was largely built between 1960 and 1980. Most homes here are single-story concrete-block ranches with original wrought-iron or aluminum driveway gates that have spent fifty years in subtropical humidity. We replace corroded posts, match existing hinge points on narrow setbacks, and install operators sized for the heavier reinforced gates that hurricane codes now require. If your gate has reached the end of its service life, call Hacienda Gate Repair at (855) 362-1433 for an assessment and a written quote before any work begins.
Why Lauderdale Lakes Homes Are Different
Lauderdale Lakes is fully built out. There is no new subdivision work here, which means nearly every gate project is a retrofit onto a mid-century lot. The original driveway gates on homes along Oakland Park Boulevard and the residential streets off State Road 7 are typically wrought iron or galvanized chain-link, and decades of salt-laden air blowing inland from the coast have done exactly what you would expect: pitted the steel, seized the hinges, and eaten through the lower rails where standing water collects after summer downpours.
The canal-laced lots complicate things further. Many homes have narrow side yards where a gate sits within a few feet of a property line or a swale, and Broward County plus Lauderdale Lakes permitting will not let you widen or relocate that gate without a survey. So the practical job is often matching the existing hinge posts and fabricating to the original opening size, with new hardware and operators that can handle the added wind load of hurricane-rated construction. Technicians here spend as much time checking setbacks and post condition as they do installing the gate itself.
Styles & brands we work with
Our Main Lauderdale Lakes Services
Two services dominate the calls we get from Lauderdale Lakes homeowners and condo associations: structural gate repair on corroded, sagging mid-century gates, and electric gate repair on operators that have failed after years of humidity and salt exposure. Each has its own dedicated page because the work, the parts, and the troubleshooting are different enough to warrant it.
Gate Repair in Lauderdale Lakes
Most repair calls in Lauderdale Lakes start with a gate that drags on the driveway or will not latch. The cause is usually rusted hinge barrels, a post that has shifted in sandy soil, or a weld that has cracked after repeated wind loading. We rebuild hinge points, straighten or replace posts, and repair the gate leaf itself so it swings true again. On older wrought-iron work especially, the repair often costs far less than a full replacement and keeps the original look of the home intact. See the full breakdown on our Gate Repair in Lauderdale Lakes page.
Electric Gate Repair in Lauderdale Lakes
Electric gate failures here follow a familiar pattern: the operator works intermittently for a few weeks, then stops responding altogether. Humidity corrodes control board connections, salt air degrades wiring, and the extra weight of a reinforced hurricane-rated gate pushes an undersized operator past its duty cycle. We diagnose the brand-specific fault, whether it is a LiftMaster, FAAC, Elite, or Mighty Mule, and replace only what has failed. Full details are on our Electric Gate Repair in Lauderdale Lakes page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lauderdale Lakes
Gate installation in Lauderdale Lakes is a measured, scheduled job, not a same-day dispatch. We start with a free on-site assessment of your existing opening, post condition, and setback constraints, then provide a written quote that is agreed before any work starts. Our Gate Installation service covers the full job: existing gate removal, new post setting when required, gate fabrication or assembly, operator installation, and final safety testing.
Automatic Gate Installation
Signs you need it
You are tired of getting out of the car in the rain to open the gate, or your current operator is older than the car you drive.
What it costs in Lauderdale Lakes
Automatic gate installation in Lauderdale Lakes typically runs $2,300 – $5,800, with the spread driven by gate size, operator brand, and whether new posts or wiring are required.
How we do it
We assess the gate weight and cycle count, recommend an operator from one of the nine brands we service, mount and wire the unit, install the safety loops or edges, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through at the lower rails, sags more than two inches at the latch point, or no longer matches the security needs of the property.
What it costs in Lauderdale Lakes
A new driveway gate in Lauderdale Lakes generally falls between $1,800 and $4,200, with aluminum on the lower end and heavier steel or fabricated iron at the upper end.
How we do it
We measure the existing opening and setbacks, fabricate or order the gate to fit the original post spacing, set new posts only if the originals are compromised, and hang the gate with new hinges and a latch that survives coastal humidity.
Sliding Gate Installation
Signs you need it
Your property has a wide driveway or a commercial entry where a swing gate would need two heavy leaves and more room than the setback allows.
What it costs in Lauderdale Lakes
Sliding gate installation in Lauderdale Lakes typically starts at $2,800 and runs up to $6,500 depending on gate length, track versus cantilever design, and the operator selected.
How we do it
We pour the track or set the cantilever posts, weld or assemble the sliding gate frame, mount the operator, and run the safety and limit settings so the gate opens and closes without binding.
What Gate Installation Costs in Lauderdale Lakes
| Item | Typical range in Lauderdale Lakes |
|---|---|
| Driveway gate (aluminum, single swing) | $1,800 – $3,400 |
| Driveway gate (wrought iron / fabricated steel) | $2,600 – $4,200 |
| Automatic operator add-on (installed) | $1,100 – $2,300 |
Is a permit required for gate installation in Lauderdale Lakes?
Yes, in most cases. Because Lauderdale Lakes is fully built out and many lots have narrow setbacks, the city and Broward County generally require a permit when new posts are set or an existing opening changes. We handle permit paperwork as part of the installation.
How long does gate installation take in Lauderdale Lakes?
Most residential driveway gate installations take one to two days on site. Fabricated iron gates add lead time for welding, and automatic operator installation with wiring or safety loops may add a second day. Call (855) 362-1433 to schedule the free measure and get a written timeline.
Brands We Service in Lauderdale Lakes
We work on your brand, not whatever we happen to sell. Our technicians carry diagnostic knowledge for LiftMaster, FAAC, Elite, and Mighty Mule, among others, and we keep common control boards and receiver parts stocked for faster turnaround in Lauderdale Lakes. See our brands for the full list of nine operators we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lauderdale Lakes, FL
| Service | Typical range in Lauderdale Lakes |
|---|---|
| Gate repair (hinge rebuild, sag fix, latch replacement) | $180 – $480 |
| Wrought iron gate repair (weld repair, rust remediation) | $260 – $650 |
| Automatic gate opener repair (control board, receiver, limit switch) | $190 – $520 |
| Electric gate motor replacement | $450 – $1,100 |
| Driveway gate installation (aluminum, single swing) | $1,800 – $3,400 |
| Driveway gate installation (wrought iron / fabricated steel) | $2,600 – $4,200 |
| Automatic gate installation (operator, wiring, remotes) | $2,300 – $5,800 |
| Sliding gate installation (track or cantilever) | $2,800 – $6,500 |
Two things push gate pricing up in Lauderdale Lakes more than anywhere else nearby: rust damage that requires replacing posts rather than repairing them, and the survey and permit work needed when a gate sits close to a property line or canal setback. Whatever the job, the price is quoted and agreed in writing before any work starts.
Neighborhoods We Serve in Lauderdale Lakes
We work across all of Lauderdale Lakes, ZIP code 33313, from the garden-apartment clusters along State Road 7 to the single-family ranch neighborhoods east of Oakland Park Boulevard. Our typical response time for repair calls anywhere in the city is 24 to 48 hours.
- East Gate
- Oakland Estates
- Lakeside Gardens
- West Gate
- Oriole Gardens
Service Area – Cities Near Lauderdale Lakes
Hacienda Gate Repair serves Lauderdale Lakes and the surrounding Broward County communities. If you are in a neighboring city, we cover those too: Broward Estates, FL, Lauderhill, FL, Fort Lauderdale, FL, and Plantation, FL. Call (855) 362-1433 and we will confirm coverage for your address.
Serving Lauderdale Lakes, FL — Our Local Coverage Area
We’re based in the Lauderdale Lakes area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lauderdale Lakes
For structural gate repairs, emergency calls, and operator failures, we typically respond within 24 to 48 hours anywhere in Lauderdale Lakes. We do not promise same-day service on new installations, which are quoted and scheduled. Call (855) 362-1433 for current availability.
Yes. We service low-rise condo and garden-apartment communities along the city’s main corridors, where automated entry gates and pool-enclosure gates need regular maintenance and corrosion repair. HOA and property manager estimates are free and can be scheduled around board approval cycles.
Call (855) 362-1433 to book a free on-site assessment. A technician will inspect the gate, posts, operator, and property-line setbacks, then give you a written quote that is agreed before any work begins. There is no charge for the visit and no obligation to proceed.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lauderdale Lakes Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Eduardo Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Alicia Jackson