Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Miami, FL
Gate installation in Miami means building for salt air, hurricane wind loads, and sandy soil that shifts under concrete footings. A gate that holds up in Orlando won’t survive five years near Biscayne Bay without corrosion treatment and impact-rated anchoring. Hacienda Gate Repair has served Miami since 2012, installing and servicing driveway gates, sliding gates, and automatic operators across the city’s older ranch-style neighborhoods and newer gated communities. Call (855) 362-1433 for a free estimate on any gate job.
Why Miami Homes Are Different
Miami’s housing stock splits into two distinct worlds that both end up needing gate work. The 33125 and 33122 ZIPs are dense with mid-century concrete-block homes and small apartment buildings, many still running original wrought-iron or chain-link driveway gates that have weathered decades of humidity. Those gates typically need re-welding at the hinge points, post re-setting where sandy soil has settled, or complete motor replacement when the original operator finally gives out. Newer gated communities in areas like 33110 use heavier steel or aluminum sliding gates with automatic operators that require brand-specific diagnostics when a sensor or control board fails.
The climate drives most repair calls. Year-round humidity and salt-laden Atlantic air accelerate rust on exposed hinges, tracks, and motor housings. After a named storm, our technicians in ZIP 33125 routinely find themselves re-aligning bent gate posts on older ranch-style homes where storm surge and saturated sandy soil have shifted footings, a repair almost never needed in Orlando. Miami-Dade’s strict building code adds another layer: any gate replacement or new installation must use impact-rated hardware and corrosion-resistant materials that meet wind-load anchoring requirements. A fence company that doesn’t work in Miami every week won’t know which brackets pass inspection here.
Styles & brands we work with
Our Main Miami Services
Most Miami homeowners and property managers reach out to us for one of two reasons: a gate that won’t open or close properly, or an automatic operator that stopped responding to remotes and keypads. Both are covered below.
Gate Repair in Miami
Gate repair in Miami usually starts with a structural issue that the salt air made worse: a sagging leaf, a hinge that’s frozen with corrosion, or a post that shifted after heavy rain. We re-weld, re-align, and replace hardware using materials rated for coastal exposure, then treat every repaired surface so the same rust doesn’t come back in eighteen months. On welded wrought-iron gates from the 1950s and 1960s, we match the existing steel profile so the repair doesn’t look like a patch. Gate Repair in Miami covers the full scope of structural fixes across the city.
Electric Gate Repair in Miami
When a LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule operator stops responding, the problem is usually a control board, a failed capacitor, or a sensor knocked out of alignment by wind. We diagnose across all nine brands, which means we’re not guessing and we’re not trying to sell you a replacement you don’t need. Humidity and power surges from Miami’s afternoon thunderstorms are common culprits behind dead boards and blown fuses here. Electric Gate Repair in Miami is a core service, not an add-on, and covers every operator platform we service.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Miami
Gate installation in Miami has to solve for two things at once: the gate has to stay square in sandy soil that shifts, and every hinge, bracket, and bolt has to resist salt corrosion for the life of the gate. Our customers in neighborhoods like Flagami and West Flagler are replacing original 1960s chain-link driveway gates that have rusted through, while newer communities in the 33110 area are adding aluminum sliding gates with automatic operators. Gate Installation is what we do most weeks, and each job gets a site assessment before any concrete is poured.
Automatic Gate Installation
Signs you need it
You’re manually dragging a heavy driveway gate open every day, or you have an elderly family member or delivery driver who can’t safely operate the existing gate.
What it costs in Miami
Automatic gate installation in Miami typically runs $2,500 to $12,000 depending on gate size, operator brand, and whether new concrete footings are required.
How we do it
We survey the driveway and soil, pour or reinforce footings, set the gate posts level, mount the operator and arms, then wire the power run, safety edges, and access controls before testing the full cycle repeatedly.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted through at the hinges, bent beyond re-alignment, or simply too narrow for modern vehicles.
What it costs in Miami
Driveway gate installation in Miami typically costs $1,500 to $10,000 for materials and labor, with steel and aluminum being the most common choices for coastal exposure.
How we do it
We measure the opening, recommend a gate material and weight that suits your hinges and operator, set posts and footings to code, hang the gate, and verify it swings or slides true with no binding.
What Gate Installation Costs in Miami
| Item | Typical range in Miami |
|---|---|
| Manual driveway gate (steel or aluminum) | $1,500 – $10,000 |
| Automatic gate with operator | $2,500 – $12,000 |
| Sliding gate with motor and track | $3,000 – $15,000 |
How long does gate installation take in Miami?
Most single-gate installations are completed in one to two days. Concrete footings need time to cure before the gate is hung and the operator is mounted, which adds a day or two depending on the mix and weather during Miami’s wet season.
Do I need a permit for a new gate in Miami?
Miami-Dade has strict building code requirements for any gate over a certain height and for all automatic operators with vehicle detection. We handle the paperwork and verify anchoring meets wind-load standards before the gate goes up. Call (855) 362-1433 to discuss your specific property.
Brands We Service in Miami
We work on your brand. Our technicians carry diagnostic tools and common parts for BFT, Linear, Viking, and Ghost Controls operators, plus five other major brands, in our Miami service vehicles. That local parts stock means most board replacements and sensor swaps happen in a single trip, not after a week-long wait for shipping. See our brands for the full operator list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Miami, FL
| Service | Typical range in Miami |
|---|---|
| Gate repair (structural) | $150 – $800 |
| Electric gate repair (operator) | $180 – $1,100 |
| Gate hinge replacement | $150 – $500 |
| Post re-alignment | $150 – $500 |
| Gate welding repair | $150 – $500 |
| Control board replacement | $350 – $800 |
| Sensor or safety edge repair | $200 – $500 |
| Manual driveway gate installation | $1,500 – $10,000 |
| Automatic gate installation | $2,500 – $12,000 |
| Sliding gate installation | $3,000 – $15,000 |
What pushes a Miami gate job to the upper end of these ranges is usually post condition and soil. If footings have shifted or the existing concrete is cracked from storm cycles, we have to pour new footings before any gate work happens. The price we quote is the price you approve before any work starts, and we walk you through the line items so there are no surprises on the invoice.
Neighborhoods We Serve in Miami
We cover the full Miami metro from Flagami to Little Havana and across the 33147, 33150, 33151, and 33152 ZIPs. Most jobs in the denser central neighborhoods are repair calls on older homes and small apartment buildings, while the western and northern edges of the city bring more installation requests on newer property. Typical response time for a Miami service call is same-day or next-day depending on the time of year.
- Flagami
- Little Havana
- West Flagler
- Allapattah
- Brownsville
Service Area – Cities Near Miami
Our Miami-based crews also cover the surrounding municipalities. If your property is in Allapattah, FL, Brownsville, FL, Coconut Grove, FL, or Coral Gables, FL, we can usually reach you with the same crew and equipment we dispatch inside Miami itself.
Serving Miami, FL — Our Local Coverage Area
We’re based in the Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Miami
Most repair calls inside Miami are reached same-day or next-day. Installation jobs are scheduled in advance, with a free site measure and written quote before any work is booked. Response time depends on call volume and your location in the city, call (855) 362-1433 for today’s schedule.
Yes. Miami-Dade’s building code and many Miami HOAs require specific wind-load anchoring, gate height limits, and operator safety features. We prepare the paperwork and build to the standard that passes inspection the first time, which matters in a city where code enforcement is not casual.
One call covers the gate and the operator. We repair the steel, the hinges, the posts, the motor, the sensors, and the keypad or intercom system in the same visit. You don’t need to coordinate a fencing company and an electrician, and we don’t stop at the mechanical side and leave the automation to someone else.
Call Hacienda Gate Repair at (855) 362-1433 for a free estimate on any gate repair, electric gate repair, or gate installation in Miami. We’ll answer the phone, ask the right questions about your gate, and give you a straight answer.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Miami Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Eduardo Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Alicia Jackson