Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pembroke Pines, FL
Gate installation in Pembroke Pines means matching a new driveway gate or pool gate to the style of a stucco-over-CBS home built between the 1980s and 2000s, then wiring an operator that will survive South Florida’s salt air and lightning season. Hacienda Gate Repair handles the full job: structure, hinges, operator, and access controls, as one dedicated gate specialist rather than a fence company that subs out the electrical work. Most of the gates we install here sit in HOA-governed communities, so we’re used to working within association approval processes and matching approved looks. Call us at (855) 362-1433 for a free estimate.
Why Pembroke Pines Homes Are Different
Pembroke Pines is a master-planned, HOA-dominated suburb. Nearly every driveway gate, pool-enclosure gate, and community-entry gate in the 33028 and 33082 ZIP codes is governed by recorded covenants, which means gate repair and installation here is as much about matching operator systems and aesthetics to association rules as it is about fixing the hardware itself. We regularly have to match replacement hardware and operator brands to an HOA’s approved color and style palette, and some associations in 33028 require gate repairs to be logged with the management company before work begins.
The housing stock shapes the work too. Large, relatively new gated-community subdivisions dominate, with wide paver driveways and decorative metal or vinyl driveway gates plus screened pool enclosures with their own safety gates. Salt-laden humid air, intense UV, and hurricane-season wind loads drive frequent corrosion of hinges, rusted steel posts, and faded vinyl. Operators fail from lightning surges and water intrusion during the May through October storm season. We keep that reality in mind on every job: a gate that works fine in February can seize up in August if the hardware wasn’t chosen for this climate.
Styles & brands we work with
Our Main Pembroke Pines Services
Two services dominate the calls we get from Pembroke Pines homeowners: straight gate repair for mechanical failures, and electric gate repair for operator and automation problems. Both jobs are different, and both fall squarely inside our specialty.
Gate Repair in Pembroke Pines
A gate that sags, drags, or won’t latch in Pembroke Pines is usually dealing with one of three problems: corroded hinges from salt air, a post that’s rusted at the base, or a paver driveway that has shifted enough to throw off the gate’s swing arc. We inspect the full structure, not just the symptom, and repair or replace hardware so the gate moves the way it did when the house was built. Some HOAs here require a repair log entry before work starts, and we handle that coordination. Read more on our Gate Repair in Pembroke Pines page.
Electric Gate Repair in Pembroke Pines
When an operator stops responding in a Pembroke Pines community, the cause is often water intrusion in the control board or a lightning surge that took out a capacitor during storm season. We diagnose the operator by brand and model, not by guesswork, and we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. One call covers the gate and the operator, so you don’t need to coordinate between a fencing company and an electrician. See our Electric Gate Repair in Pembroke Pines page for more.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pembroke Pines
New gate installation in Pembroke Pines usually means one of two scenarios: a homeowner replacing a builder-grade gate that has rusted out, or a property manager upgrading a community entry point to a motorized system that can handle daily cycling. The housing era matters here. Many homes built from the 1980s through the 2000s still have their original gate hardware, and after two or three decades of salt air, the hinges and posts are often beyond repair. A new gate lets you choose materials and an operator that fit both your HOA’s rules and this climate. Our Gate Installation service covers the full job, from concrete work on the post to the final operator programming.
Automatic Gate Installation
Signs you need it
Your manual gate gets opened and closed several times a day, or you want controlled entry for a home or small community without manually keying in every visitor.
What it costs in Pembroke Pines
Automatic gate installation in Pembroke Pines typically runs from $1,050 to $3,100 depending on the operator brand, gate weight, and whether the power run is already in place.
How we do it
We set the operator mounting, run and connect power, install safety edges and photocells, then program remotes and keypads and test the full cycle.
Driveway Gate Installation
Signs you need it
Your current driveway gate is rusted, sagging, or no longer matches the home, or you’re adding a gate to a paver driveway for the first time.
What it costs in Pembroke Pines
Driveway gate installation in Pembroke Pines typically lands between $1,100 and $3,600 depending on gate material, width, and whether concrete footer work is needed under pavers.
How we do it
We set posts in concrete, hang and align the gate to the driveway’s slope, install hardware rated for the gate’s weight, and add an operator if the job calls for one.
Sliding Gate Installation
Signs you need it
Your driveway is tight on swing clearance, or the HOA’s approved gate style calls for a sliding panel instead of a swing gate.
What it costs in Pembroke Pines
Sliding gate installation in Pembroke Pines usually costs between $1,250 and $3,800, with the high end covering longer spans and heavy cantilever hardware.
How we do it
We set the track or cantilever rollers, hang the panel, adjust the travel stops and bearings, then wire and program the operator for smooth cycling.
What Gate Installation Costs in Pembroke Pines
| Item | Typical range in Pembroke Pines |
|---|---|
| Automatic gate installation | $1,050 – $3,100 |
| Driveway gate installation | $1,100 – $3,600 |
| Sliding gate installation | $1,250 – $3,800 |
Do you handle the power run and the safety edges?
Yes. We run the power to the operator, mount the safety edges and photocells, and test the full system before we leave, so the gate is compliant and fully operational in one visit.
Will the gate match my HOA’s approved style?
We match the hardware color and gate style to your association’s palette and record, and we’ll help you file the approval paperwork if your HOA in 33028 or 33082 requires it.
Brands We Service in Pembroke Pines
We service Elite and Mighty Mule operators on residential gates, and LiftMaster and FAAC on light-commercial and community entry systems throughout Pembroke Pines. Parts are stocked for quick turnaround. You can see the full operator list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pembroke Pines, FL
| Service | Typical range in Pembroke Pines |
|---|---|
| Automatic gate installation | $1,050 – $3,100 |
| Driveway gate installation | $1,100 – $3,600 |
| Sliding gate installation | $1,250 – $3,800 |
Prices in Pembroke Pines run higher when an HOA requires a specific operator brand or finish that isn’t stocked locally, or when storm damage means replacing both the structure and the automation. Every job is quoted and agreed before any work starts, so you’ll never see a surprise line item on the invoice.
Neighborhoods We Serve in Pembroke Pines
We work throughout the 33028 and 33082 ZIP codes, including most of the gated-community subdivisions in the western half of the city. Typical response for a repair call in Pembroke Pines is same-day or next-day depending on the time of year.
- Chapel Trail
- Silver Lakes
- Pembroke Falls
- Grand Palms
- Westfork
Service Area – Cities Near Pembroke Pines
Beyond Pembroke Pines, we serve several nearby cities in Broward County. Gate work in these areas follows the same South Florida corrosion and HOA patterns, so the same repair approach applies. See our pages for Cooper City, FL, Pine Island Ridge, FL, Hollywood, FL, and Andover, FL.
Serving Pembroke Pines, FL — Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pembroke Pines
We respond to repair calls in Pembroke Pines the same day in most cases, and we carry the common operator parts for LiftMaster, FAAC, Elite, and Mighty Mule on the truck, so many fixes happen on the first visit. Call (855) 362-1433 and we’ll give you a straight arrival window.
In many communities, yes. Some HOAs in 33028 require gate repairs to be logged with the management company before work begins, and installation almost always needs an architectural review. We coordinate with your association so the job doesn’t stall on paperwork.
Yes. We cover the full 33028 and 33082 ZIP codes, from the older eastern subdivisions to the newer gated communities in the west, including Chapel Trail, Silver Lakes, and Pembroke Falls.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pembroke Pines Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Eduardo Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Alicia Jackson