Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Miami, FL
Gate installation in South Miami usually means working around mature oak canopies, mid-century ranch layouts, and hardware that has spent decades in salt-laced humidity. We install new automated and manual gates for homes throughout the 33143 ZIP, and we build each job around the specific corrosion and drainage conditions this area throws at metal and electronics. If your existing gate is sagging, rusted through, or you’re ready to add a motorized entry, call us at (855) 362-1433 for a free estimate.
Why South Miami Homes Are Different
South Miami’s housing stock is largely 1950s through 1970s ranch-style homes on deep, tree-lined lots. Many of these properties still have their original aluminum or wrought-iron driveway gates, or they had decorative courtyard gates added decades ago. That means we see a lot of hinge posts set in old concrete, gate frames that have been welded and re-welded, and operator wiring that was never rated for continuous exposure to subtropical moisture.
The bigger factor is the air itself. South Miami sits close enough to Biscayne Bay that salt-laden breezes carry through the 33143 neighborhoods, and when that combines with year-round humidity, gate hardware corrodes noticeably faster than it does even a few miles inland. Hinges seize. Latch springs snap. Control boards develop green corrosion on terminals. Homeowners west of US-1, where ficus and oak canopies keep the ground damp and shaded, tend to see the most water-related electronics failures because low-voltage wiring runs through soil that rarely fully dries out.
For anyone replacing or installing a gate here, the local conditions argue for marine-grade hinges, powder-coated or aluminum frames, and control boxes mounted above the splash line with sealed conduit connections. These aren’t upgrades we upsell; they’re the difference between a gate that lasts fifteen years in South Miami and one that needs major work in five.
Styles & brands we work with





Our Main South Miami Services
Most calls we take from South Miami homeowners fall into two categories: a gate that has stopped working and needs repair, or an automated system that has failed and needs electric gate diagnosis. Both are covered in depth on their own pages below.
Gate Repair in South Miami
South Miami’s older iron and aluminum gates take a beating from humidity and bay salt, and the most common failures we see are seized hinges, cracked welds, and latch assemblies that no longer line up. On tree-lined lots, root growth also shifts gate posts over time, which makes a previously smooth gate drag or refuse to close. We repair the gate structure and hardware so it swings or slides correctly again, whether it’s a manual driveway gate or a motorized one with structural issues. For the full scope of what we fix and what it costs, see our dedicated Gate Repair in South Miami page.

Electric Gate Repair in South Miami
When a South Miami gate won’t open, won’t close, or stops mid-cycle, the problem is usually in the operator, the safety sensors, or the low-voltage wiring. Humidity accelerates corrosion on control boards, and the heavy afternoon thunderstorms we get in the summer can trip or waterlog a control box in minutes. We diagnose and repair automated swing and slide gate systems across all nine operator brands we service, including FAAC, BFT, and Viking. For a full breakdown of electric gate repair costs and same-day options, see our Electric Gate Repair in South Miami page.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in South Miami

Most gate installations we do in South Miami are replacing gates that are thirty to fifty years old on ranch-style properties, or adding automated driveway gates to newer infill construction where the homeowner wants privacy and a controlled entry point. The local challenge is always corrosion management: salt from the bay, humidity that never lets metal dry, and occasional standing water in low-lying yards near old irrigation lines. We select materials and mount operators accordingly, and we quote every install before any work begins. You can read more about the full Gate Installation process on our service hub page.
Automatic Gate Installation
Signs you need it
You’re ready to automate an existing swinging or sliding gate, or you want a fully new motorized entry with remote access, safety sensors, and keypad or intercom integration.
What it costs in South Miami
Automated gate installation in South Miami typically lands in the $4,500 – $15,000 range depending on operator brand, gate size, and whether we’re retrofitting an existing gate or installing a new one.
How we do it
We measure the gate opening, confirm the swing or slide path is clear of root heave and drainage issues, mount the operator and arm on reinforced posts, and run sealed low-voltage conduit to the control box and safety edges before programming remotes and testing obstruction reversal.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted, sagging, or no longer matches the scale of the property, or you want to add a gate where there’s never been one to enclose the driveway entry.
What it costs in South Miami
Driveway gate installation in South Miami generally runs $2,500 – $9,000 for the gate and posts, with automation adding to the total if you want a motorized system.
How we do it
We set new post footers below the root zone where possible, hang the gate on marine-grade hinges with adjustable gaps for future settling, and make sure the latch and drop rod work smoothly before we call the job done.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the street, your frontage is limited, or a swing gate would block your own entry path when open.
What it costs in South Miami
Sliding gate installation in South Miami typically ranges $3,500 – $12,000 because the track, roller trucks, and motor mount require level ground work and a smooth travel path.
How we do it
We grade and compact the track bed, set the roller trucks and guide posts parallel to the fence line, hang the gate with proper clearance, and install the operator with a rack-and-pinion drive so the gate moves evenly under load.
What Gate Installation Costs in South Miami
| Item | Typical range in South Miami |
|---|---|
| Driveway gate installation | $2,500 – $9,000 |
| Automated gate installation | $4,500 – $15,000 |
| Sliding gate installation | $3,500 – $12,000 |
These ranges cover the gate structure, posts, hardware, and standard finish. Automation adds operator, safety sensors, keypad or remote equipment, and the electrical work, which is why automated installs sit at the top of the range.
How long does a gate installation take in South Miami?
A standard single driveway gate installation takes one to two days once materials are on site. Custom or automated jobs with new footers and electrical runs can take three to five days, including concrete cure time.
Do you pull the permits for a gate installation in South Miami?
Whether a permit is required depends on the gate height, the automation kit, and where the gate sits relative to the property line. We confirm the current South Miami requirements on every quote and handle the paperwork for you. Call (855) 362-1433 and we’ll check your address.
Brands We Service in South Miami
We work on the operator your gate already has. Our technicians carry parts and diagnostic knowledge for FAAC, BFT, Linear, and Viking, along with five other major gate operator brands. That means a South Miami repair doesn’t stall waiting on a generic part order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Miami, FL
| Service | Typical range in South Miami |
|---|---|
| Gate repair (structure and hardware) | $150 – $1,500 |
| Electric gate repair (operator and controls) | $250 – $2,200 |
| Sensor and safety edge replacement | $200 – $600 |
| Hinge weld or replacement | $150 – $500 |
| Gate operator replacement | $1,200 – $3,500 |
| Keypad and intercom repair | $200 – $700 |
| Driveway gate installation | $2,500 – $9,000 |
| Sliding gate installation | $3,500 – $12,000 |
| Automated gate installation | $4,500 – $15,000 |
Corrosion repair and rewiring on older South Miami gates pushes labor higher than you’d see inland, because seized bolts and water-damaged conduit slow the work down. Every price is quoted and agreed before we start, and the number we quote is the number you pay.
Neighborhoods We Serve in South Miami
We cover the full 33143 ZIP, from the older ranch-style streets west of US-1 to the newer infill builds closer to downtown South Miami. Most of our South Miami calls are scheduled same week, with repair and emergency work often available same day.
- South Miami Heights
- Ludlam
- High Pines
- Ponce Davis
- Sunset
Service Area – Cities Near South Miami
Hacienda Gate Repair runs service calls throughout the communities around South Miami, including Glenvar Heights, FL, Coconut Grove, FL, Coral Gables, FL, and Coral Terrace, FL. If your gate is down and you’re not sure whether you’re in our range, call us at (855) 362-1433 and we’ll confirm it on the spot.
Serving South Miami, FL — Our Local Coverage Area
We’re based in the South Miami area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Miami
Most South Miami repair calls are answered same day or next morning, depending on the time of the call and the specific failure. A gate stuck open is a security issue, and we treat it as one. Call (855) 362-1433 and describe the problem, and we’ll give you a straight answer on timing.
Many South Miami neighborhoods with HOA oversight do have design restrictions on gate height, material, and finish, particularly for street-facing driveway gates. We work from your HOA’s written standards on every install and will flag any conflicts before we quote the job.
Both. One call covers the gate structure and the automation system, so you’re not coordinating between a fencing company and an electrician when your South Miami gate fails. That’s the entire reason we exist as a gate-only shop. Estimate is free at (855) 362-1433.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What South Miami Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Eduardo Delgado"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Alicia Jackson"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Imani Prince