Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sunrise, FL
Gate installation in Sunrise usually means replacing an HOA-style aluminum or wrought-iron driveway gate on a 1970s-1990s ranch or Mediterranean home, or fitting a slide operator at a community entrance. The work here is shaped by salt-laden humidity, hurricane wind-load codes, and heavy daily cycle counts that punish undersized hardware. Hacienda Gate Repair handles the full job: structure, operator, posts, and electrical. Call (855) 362-1433 for a free site measure and a written price.
Why Sunrise Homes Are Different
Sunrise’s housing stock tilts heavily toward planned subdivisions built between the 1970s and 1990s: stucco-over-CBS construction, barrel-tile roofs, and driveway gates mounted to concrete or block pillars. Many of these are HOA-governed communities where the gate style, height, and finish are specified by association rules, so replacement work often requires matching an existing streetscape rather than picking whatever’s cheapest.
Climate is the other constant. Year-round humidity, daily summer thunderstorms, and salt air from the Atlantic push corrosion into hinges, roller tracks, and operator circuit boards faster than inland installs. Broward County’s post-Andrew product-approval rules mean any new operator or gate hardware has to meet wind-load and impact standards – which is why we specify code-compliant mounts and fasteners on every Sunrise install, not just on hurricane-rated projects.
Styles & brands we work with
Our Main Sunrise Services
Sunrise homeowners call us for two jobs more than anything else: a gate that has stopped swinging or sliding properly, and an electric operator that won’t open, won’t close, or won’t stop at the right limit.
Gate Repair in Sunrise
Most structural gate work in Sunrise comes down to sagging hinges, rusted posts, or a gate that has shifted on concrete pillars after years of storm cycles. We repair the gate itself, not just the motor. That includes re-hanging, post stabilization, hinge and roller replacement, and alignment work on aluminum and wrought-iron gates common to HOA communities. One call covers the gate and the operator, so you’re not coordinating a fence company and an electrician. Gate Repair in Sunrise
Electric Gate Repair in Sunrise
Electric gate repair, not an afterthought. Sunrise’s lightning-strike density means surge damage to operator boards is a routine call, especially on HOA entrance systems that cycle dozens of times a day. We diagnose across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whether your gate won’t open, won’t close, or won’t stop, the fix is based on your actual operator, not a guess. Electric Gate Repair in Sunrise
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Sunrise
New gate installation in Sunrise almost always falls into one of two buckets: a single-family driveway gate on a 1970s-1990s subdivision lot, or a shared HOA entrance with a slide operator and heavier daily traffic. Either way, the South Florida climate dictates material choice: powder-coated aluminum holds up far better than raw steel in salt-laden humidity, and every operator we install is spec’d for hurricane wind loads and code-compliant anchoring. Gate Installation
Automatic Gate Installation
Signs you need it
Your current gate is manual but you’re tired of getting out of the car in a downpour, or an existing operator is dead and the gate itself isn’t worth repairing around.
What it costs in Sunrise
A complete automatic gate installation in Sunrise typically runs $2,500 to $9,500 depending on gate size, operator type, and whether new posts are needed.
How we do it
We measure the gate and posts, confirm wind-load requirements, mount the operator, and run a dedicated electrical circuit with surge protection – standard practice in Florida’s lightning environment.
Driveway Gate Installation
Signs you need it
You have a driveway opening that was never gated, or the existing gate is rusted through at the hinges and repair would cost more than a new aluminum gate.
What it costs in Sunrise
Driveway gate installation in Sunrise typically ranges from $3,000 to $12,000 including the gate, posts, operator, and electrical run.
How we do it
We set or reinforce the pillars, hang a powder-coated aluminum or wrought-iron gate rated for the opening width, then install and program the operator to the gate’s weight and travel.
Sliding Gate Installation
Signs you need it
The driveway slopes up from the street, the opening is too wide for a swing gate, or HOA rules require a slide configuration for the entrance.
What it costs in Sunrise
Sliding gate installation in Sunrise generally falls between $4,000 and $15,000, with the higher end covering cantilever designs and commercial-grade operators.
How we do it
We pour or bolt the track foundation, set the gate on rollers, and mount a slide operator matched to the gate’s weight and daily cycle count.
What Gate Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Automatic gate installation | $2,500 – $9,500 |
| Driveway gate installation | $3,000 – $12,000 |
| Sliding gate installation | $4,000 – $15,000 |
Do I need HOA approval before installing a gate in Sunrise?
Yes, in most of Sunrise’s HOA-governed communities you’ll need architectural-review approval before any gate changes. We can provide the material specs, dimensions, and operator details your board will ask for so the review goes through cleanly.
Will a new gate operator handle hurricane season in South Florida?
A properly installed operator will survive the wind, but you want surge protection on the board and battery backup for the opener. We wire surge suppression into every Sunrise install because lightning-strike and power-surge failures are a recurring issue here.
Brands We Service in Sunrise
We work on your brand. Our service trucks carry parts and diagnostic tools for BFT, Linear, Viking, and Ghost Controls operators, plus the other major platforms we service. When a board fails or a limit switch drifts, that stock means fewer return trips and shorter turnaround. See our brands for the full operator list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate repair (structural) | $180 – $450 |
| Electric gate repair (operator/electrical) | $200 – $500 |
| Automatic gate installation | $2,500 – $9,500 |
| Driveway gate installation | $3,000 – $12,000 |
| Sliding gate installation | $4,000 – $15,000 |
In Sunrise, prices push toward the upper end when the gate sits on a shared HOA entrance with heavy daily cycles, when access requires staging in a tight swale, or when the operator needs a dedicated electrical run from the main panel. Whatever the job, your price is quoted and agreed before any work starts – no open-ended invoices.
Neighborhoods We Serve in Sunrise
We cover the full 33304 ZIP and the surrounding Sunrise neighborhoods, from the HOA-heavy communities near the Sawgrass to the older ranch subdivisions along the main corridors. Our usual response to most Sunrise gate calls is same-day or next-day.
- Sunrise Golf Village
- Sunrise Lakes
- Welleby
- Springtree
- Sawgrass Mills area
Service Area – Cities Near Sunrise
Hacienda Gate Repair runs calls across the central Broward corridor from our Hollywood base. Besides Sunrise, we regularly serve Wilton Manors, FL, Boulevard Gardens, FL, Rock Island, FL, and Roosevelt Gardens, FL with the same gate-specialist crew and stocked trucks.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most Sunrise gate repairs are scheduled same-day or next-day. Emergency calls – a gate stuck open, a failed HOA entrance operator – get prioritized, and we’ll give you a straight arrival window when you call, not a four-hour spread.
We handle the technical side: material specs, wind-load compliance, operator details, and drawings if your board needs them. The application itself goes through you and your HOA, but we’ve seen enough Sunrise communities to know what the boards typically ask for.
We cover all of Sunrise’s 33304 ZIP and the neighboring central Broward cities, including Wilton Manors, Boulevard Gardens, Rock Island, and Roosevelt Gardens. If you’re just outside that radius, call (855) 362-1433 and we’ll tell you directly whether we can take the job.
If your gate needs work in Sunrise, call Hacienda Gate Repair at (855) 362-1433 for a free estimate. We’ll measure, diagnose, and give you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Alicia Jackson"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Imani Prince"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Ryan Quinn