Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Westchester, FL
Gate installation in Westchester usually means working with a 1950s or 1960s lot that was never designed for today’s wider vehicles or automated entry systems. Most driveways here are narrow, side yards are tight, and the original gate is often wrought iron or chain-link with decades of salt-air exposure behind it. Hacienda Gate Repair has served Westchester since 2012, and we handle the full job: removing the old gate, setting new posts in concrete, hanging the gate, and wiring the operator if you want automation. Call (855) 362-1433 for a free estimate and a written price before any work starts.
Why Westchester Homes Are Different
Westchester’s dense mid-century tract housing means most driveways and property lines are tight, so gate repair here is dominated by repairing or replacing older sliding and swing gates on narrow lots where clearance and setback are constant constraints, unlike the wider-lot suburbs to the west. A gate that swings out over a sidewalk or blocks a neighbor’s fence line is a code problem here, not just a preference. Many of the original 1950s and 1960s gates were built from wrought iron or chain-link, and after 60-plus years of South Florida weather, the hinges are usually the first thing to fail. Salt-laden air accelerates rust on metal gates, and heavy seasonal rains work water into post footings and operator housings. Hurricane-season wind loads stress every latch, hinge, and track, which is why we recommend corrosion-resistant hardware and secure latching on every Westchester job. After a tropical storm or hurricane warning, we get a surge of calls for gates that won’t latch or have been knocked off their tracks. Owners need them secured fast, before insurance inspections and wind-load requirements kick in. That’s the reality of gate work in ZIP 33144.
Styles & brands we work with
Our Main Westchester Services
Most Westchester homeowners call us for one of two reasons: the gate itself is broken, or the electric operator that moves it has stopped responding. Both are handled by the same specialist team, so you don’t have to coordinate between a fencing company and an electrician.
Gate Repair in Westchester
A sagging gate, a hinge that’s pulled away from the post, a latch that won’t catch: these are the calls we make most often in Westchester. The compact lots and original 1950s – 1970s gates here mean we regularly replace rusted hinges, straighten leaning posts, and rebuild gate frames that have twisted over time. We also repair and replace sliding gate tracks and rollers, which take a beating in the humid, salty air. One call covers the gate and the operator, so if the problem turns out to be in the automation, we handle that on the same visit. See the full scope on our dedicated Gate Repair in Westchester page.
Electric Gate Repair in Westchester
Electric gate repair is not an afterthought for us. When an opener stops responding, the problem is usually in the control board, the limit switches, the safety sensors, or the motor itself. Westchester’s older automatic gates often run on early-generation openers that have been patched together for years, and salt-air corrosion inside the housing is a common culprit. We work on your brand, whether it’s LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule. Electric gate repair is a core competency, not an add-on. Read the full breakdown on our Electric Gate Repair in Westchester page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Westchester
Gate installation in Westchester starts with a simple problem: the old gate doesn’t fit the way you actually use the driveway. Maybe it swings out over a sidewalk, or it’s too narrow for a modern SUV, or it’s rusted to the point where repair costs more than replacement. South Florida’s salt-laden air and heavy seasonal rains mean a new gate should be built with corrosion-resistant hardware from day one, and on Westchester’s tight lots, the swing arc or slide path has to be measured carefully so the gate doesn’t hit a wall, a car, or a neighbor’s fence. We’re a dedicated gate repair company, and installation is part of that same specialty. We measure, quote a fixed price, and handle the removal, the new posts, the gate, and the automation if you want it. You can see our broader installation work on the Gate Installation hub.
Automatic Gate Installation
Signs you need it
You’re getting out of the car in the rain to open a manual gate, or you’ve tried a retrofit opener on a gate that’s too heavy for it.
What it costs in Westchester
Typical automatic gate installation in Westchester runs from $4,200 to $9,800, depending on the gate material, the operator model, and whether we’re running new power to the gate post.
How we do it
We mount the operator on a reinforced post or pad, run the power and low-voltage wiring, connect the safety sensors and keypad, and program the open and close limits on-site.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, or the existing one is too narrow, too low, or too rusted to function safely.
What it costs in Westchester
A new driveway gate in Westchester typically lands between $2,800 and $7,500 for the gate and hardware, before automation.
How we do it
We measure the driveway opening and set new posts in concrete, hang the gate with adjustable hinges, and set the latch so it holds firmly under wind load.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your setback is so tight that a swing gate would hit the house, the car, or the property line.
What it costs in Westchester
Sliding gate installation in Westchester runs from $3,500 to $9,200, with the track, rollers, and gate frame accounting for most of the materials.
How we do it
We lay a level track on a concrete pad, mount the gate on wheeled rollers, and install the stops and guide posts so the gate travels straight without binding.
What Gate Installation Costs in Westchester
| Item | Typical range in Westchester |
|---|---|
| Manual gate, installed | $2,800 – $7,500 |
| Automatic gate, installed | $4,200 – $9,800 |
| Sliding gate, installed | $3,500 – $9,200 |
How long does a gate installation take in Westchester?
Most manual gate installations are done in one day. An automatic gate usually takes a second visit because we set posts and let the concrete cure before mounting the operator and running low-voltage wiring. We’ll give you a firm schedule before work starts.
Will you remove my old Westchester gate?
Yes. We remove the old gate, cut or pull the old posts, and haul away the debris as part of the quote. We don’t leave the old gate leaning against your house or your neighbor’s fence line. The removal is included in the price we quote before any work begins.
Brands We Service in Westchester
We carry parts for the operators Westchester homes actually have: LiftMaster, FAAC, Elite, and Mighty Mule, among the nine brands we service. Since we stock control boards, sensors, and remotes locally, we don’t have to order in common parts and leave your gate dead for a week. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Westchester, FL
| Service | Typical range in Westchester |
|---|---|
| Manual gate repair | $180 – $600 |
| Hinge replacement | $150 – $450 per hinge set |
| Gate post reset or replacement | $400 – $1,200 |
| Sliding gate track and roller repair | $250 – $800 |
| Electric gate opener repair | $250 – $900 |
| Control board replacement | $350 – $1,000 |
| Operator replacement | $1,200 – $3,500 |
| Manual gate, installed | $2,800 – $7,500 |
| Automatic gate, installed | $4,200 – $9,800 |
| Sliding gate, installed | $3,500 – $9,200 |
In Westchester, the two big cost drivers are the operator, if you’re adding automation to an older manual gate, and the condition of the posts. Homes built in the 1950s and 1960s often have posts set in shallow footings, and salt-air corrosion can mean replacing the post rather than just the hinge. Whatever the job, we quote the full price up front and you approve it before any work starts. No surprises on the invoice.
Neighborhoods We Serve in Westchester
Our trucks cover all of ZIP 33144, from Bird Road up to Coral Way and across to the Palmetto. We’re usually on-site within a day for non-emergency calls, and we prioritize storm-related gate failures during hurricane season.
- Bird Road corridor
- Westchester North
- Tropical Estates
- Biltmore Terrace
- Coral Way area
Service Area – Cities Near Westchester
We also serve the neighborhoods and cities around Westchester. If you’re in Flagami, FL, West Miami, FL, Coral Terrace, FL, or Virginia Gardens, FL, we’ll send a gate specialist to your address, not a general handyman.
Serving Westchester, FL — Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Westchester
For a gate that won’t close or won’t latch after a storm, we prioritize Westchester calls the same day when possible. During hurricane season, we move jobs around to get failed gates secured first, because an unlatched gate is a liability and an insurance problem. Call (855) 362-1433 and we’ll tell you straight when we can be there.
Most Westchester homes are single-family with no HOA, but if your property is in a small community association, the board may need to approve the gate style before installation. We’ll give you the spec sheet and drawings to submit. For permits, we follow what the job requires, and we’ll tell you up front if one is needed.
Yes. We do operator-only replacements on existing gates all the time. We’ll check the gate’s weight and swing or slide path first, then recommend an operator from the nine brands we service that matches your gate, not just whatever is on sale. The price is quoted and agreed before work begins.
Whether your gate won’t open, won’t close, or won’t stop, call Hacienda Gate Repair at (855) 362-1433 for a free estimate. We serve Westchester with a single focus: gates, and the operators that move them.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westchester Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ernesto Mendoza"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Daniela Garcia"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Ruben Guzman