Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Hollywood Homeowners
A gate that doesn’t open when you pull up to your own driveway in Hollywood isn’t just annoying, it’s a daily frustration that eats at your schedule and your security. Hacienda Gate Repair installs residential and light-commercial gates across Hollywood, from Emerald Hills to Hollywood Lakes, and we do it as a dedicated gate company rather than a general contractor who happens to own a post-hole digger. Roland Vega leads a crew that works exclusively on gate systems, which means the operator, the hinges, the track, and the electrical are all handled by one team on one call. We quote every installation up front, in writing, before any work starts. Call (855) 362-1433 and we’ll schedule a free measure and estimate at your Hollywood property.
Automatic Gate Installation
Automatic Gate Installation is the process of mounting a motorized operator system onto a new or existing gate and wiring it to open and close on command rather than by hand. Gate Installation in Hollywood is what homeowners ask for when a manual gate becomes a chore to operate, when they want to control entry from the house or phone, or when they’re building a driveway from scratch and want the automation planned in from day one. Hacienda Gate Repair handles the full scope: gate fabrication or sourcing, post setting, operator mounting, safety sensor placement, and programming. Because we service nine competing operator brands, we size the right motor for your gate’s weight and cycle count instead of pushing whatever box is on the shelf.
Operator Selection by Usage
A gate that cycles 10 times a day for one family needs a different operator than one serving a small HOA entrance cycling 300 times a day. We factor in gate weight, panel length, wind exposure, and daily cycles to spec the right unit from the start. Undersizing an operator is the fastest way to shorten its life and eat warranty calls.
Wiring and Power Run
Automatic gates need power at the hinge post or slide track, and that means a dedicated electrical run, usually underground to the operator location. We coordinate the full electrical scope so you don’t end up with a gate that’s hung but not connected. Safety edges and photo eyes get wired and tested as part of the installation, not as an afterthought.
Styles & brands we work with
Gate Installation Services
Gate Installation pricing covers everything from the first site measure to the final walkthrough: digging and setting posts, fabricating or ordering the gate panel, hanging it square, mounting the operator if it’s automated, and running the power and safety systems. Hollywood properties range from zero-lot-line homes in Hollywood Hills with narrow side access to larger lots in Emerald Hills with full driveway swings, and the approach changes with the site. Hacienda Gate Repair does this as our core trade, not as a side line. One call covers the gate and the operator, which means you’re not coordinating between a fencing company and an electrician when something doesn’t line up.
Site Measure and Layout
Before anything gets ordered or set in concrete, we measure the opening, check grade, locate underground utilities, and confirm the swing or slide direction. Getting the layout wrong by two inches turns into a gate that binds at the latch or scrapes the driveway. We mark everything on site so you see the plan before the work begins.
Post Setting and Alignment
Posts carry the entire weight of the gate plus the operator’s opening force, so they get set deep and plumb with proper concrete curing time. Haste at this stage is why gates sag after a year. We set, brace, and wait for concrete to cure before hanging the gate, which is a sign of a trade specialist doing the job in the right order.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is the full integration of a motorized gate with its power supply, safety devices, and access controls: keypads, remotes, intercoms, or vehicle detection loops. It’s the work Hollywood property managers and homeowners need when they want a gate that opens hands-free and closes on its own without a manual shove. Hacienda Gate Repair treats electric gate work as a core competency, not an add-on. Our electricians and gate techs work the same site at the same time, so the power run, the operator mounting, and the safety sensor wiring happen as one coordinated job rather than two separate trades passing the buck.
Safety Sensor Integration
Federal safety standards require that automated gates reverse when they encounter an obstruction, and that means photo eyes, safety edges, or both depending on the gate type and site conditions. We install and test these on every automated gate, no exceptions. A gate without working reversing sensors is a liability waiting to happen.
Access Control Wiring
From a simple keypad on a gooseneck to an intercom tied to a phone line or cell network, access control needs clean wiring and correct programming. We program remotes, keypads, and phone-entry systems on site and walk you through using them. Most installations finish with every remote and code working before we leave the driveway.
Driveway Gate Installation
Driveway Gate Installation is the process of putting a working gate across a residential driveway opening, whether it’s a single swing panel, a dual swing pair, or a slide gate running on a track. Carver Ranches Gate Installation and Hollywood driveways vary from short slabs in Hollywood Lakes to deeper setbacks in the Lakes section of Emerald Hills, and the gate type should match the available space and the grade. Hacienda Gate Repair installs driveway gates for homeowners who want secure parking, a defined property line, and a gate that doesn’t look like it came off a commercial lot. We quote the full job, gate and operator, before ordering a single panel.
Swing vs. Slide for Residential Lots
Most Hollywood driveways take a swing gate because there’s enough apron space for the arc. But a steep driveway or a tight setback near the sidewalk can rule out a swing and push you toward a slide gate or a compact bi-fold. We walk the site, check the grade and the city setback requirements, and tell you what fits before you spend money on hardware.
Curb Appeal and Material Choice
Aluminum, steel, or a mix of the two, in styles from modern horizontal slats to traditional pickets. The material matters for coastal air: Hollywood’s salt-laden breeze from the Atlantic eats untreated steel, so we steer homeowners toward aluminum or properly coated steel for the frame and panels. Form follows function in material selection, and we tell you the trade-offs straight.
Sliding Gate Installation
Sliding Gate Installation is the process of building a gate that rolls sideways on a track or cantilever system instead of swinging over the driveway. It’s the right call in Hollywood when the driveway slopes, when there’s no room for a swing arc, or when a property line sits close to the sidewalk and a swing gate would hit the public walkway. Hacienda Gate Repair installs slide gates for residential and light-commercial sites across Hollywood and Gate Installation – Andover, including the industrial and mixed-use pockets near the CSX rail line and the commercial frontage along Pembroke Road. Slide gates demand a precise track bed and level rollers, or they’ll bind and burn out operators.
Track Bed and Roller Alignment
A slide gate runs on wheels riding a track, and any dip or rise in that track translates directly into motor strain and noisy operation. We cut and level the track bed, set the rollers, and adjust the counterbalance so the gate moves with one hand before the operator ever gets bolted on. The gate gets proven manually first, then automated.
Cantilever vs. Track Systems
For driveways where a ground track would clog with sand and debris, a cantilever slide gate rides above the ground on offset rollers. Hollywood’s coastal landscaping and regular rain runoff can make a ground track a maintenance burden. We let the site conditions decide which slide system makes sense, and we explain the difference in plain terms.
Gate Opener Installation
Gate Opener Installation is the mounting, wiring, and programming of the motorized unit that moves an existing or newly installed gate. Hollywood homeowners call for this when they already have a manual gate they like and want to convert it to automatic operation without ripping everything out. Hacienda Gate Repair installs openers from the brands we service, and we match the opener to the gate’s weight and construction rather than the other way around. A cast-iron manual gate from the 1960s needs a different class of opener than a lightweight aluminum panel, and guessing here is how you get a motor that trips its own breaker.
Retrofit vs. New Installation
Retrofitting an opener onto an existing gate means checking the hinges, the post depth, and the gate’s current weight against the opener’s rated capacity. If the gate sags or the posts are undersized, no opener will run smooth. We tell you honestly when the gate itself needs reinforcement before the automation goes on, and we quote both scopes so you know your real number.
Programming and Handoff
We program every remote and keypad on site, set the open/close limits, adjust the force sensitivity, and run the gate through its safety reversal tests. You’ll leave the job with every remote working and the opener’s manual release shown to you in person. This is the part where a brand-agnostic tech earns their keep, because the programming menu on a Viking differs from a Linear, and we know both.
Gate Fabrication
Gate Fabrication is the building of the gate panel and frame to the exact width, height, and style of your opening, done by welders and fabricators who specialize in gate work rather than general metalwork. Hollywood homes and commercial sites often need a custom panel because the opening was never a standard size, or the existing gate rotted or rusted past repair and a stock replacement won’t match the fence line. Hacienda Gate Repair fabricates gates to order, and we measure the finished opening after the old gate comes out so the new panel fits without shims or ugly gaps.
Custom Dimensions and Matching
A stock gate panel from a big-box store fits a stock opening, and Hollywood properties are rarely that uniform. We build to the opening we actually measure, including any grade variations. The result is a gate that closes flush without a pry-bar adjustment on install day.
Material Selection for Coastal Air
Aluminum is the smart default near the Hollywood coast because it doesn’t rust, while powder-coated steel offers a heavier feel and a different aesthetic. We source from local metal suppliers and fabricate in our own shop, so the gate isn’t a generic panel shipped from a catalog. Every fabrication job includes a prime and finish coat spec’d for the salt exposure your property actually gets.
Brands We Service
Hacienda Gate Repair holds certified working knowledge of nine gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters when you’re buying an installation, because a tech who only knows one brand will spec that brand whether it fits your gate or not. We work on your brand, and we identify the right fix rather than pushing a preferred product sale.
FAAC and BFT units show up on Hollywood’s higher-end residential and commercial gates, where hydraulic operators handle heavy panels. Linear and Viking are more common on mid-range residential swing and slide gates, and both brands have their own programming quirks we see in the field weekly. Whether you have a FAAC, BFT, Linear, or Viking operator on an existing gate, or you’re choosing one for a new installation, Hacienda Gate Repair can spec, install, and stand behind it.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate bangs off its stops or slams shut. An operator that can’t control its closing force is a safety problem, and a gate that slams is stressing its own hinges and frame. This is a fix-now situation, and it usually points to faulty limit switches or a failing operator board.
- The gate binds halfway and reverses. That reversal is usually the safety system doing its job, but doing it because the gate is physically jammed. A pro can find whether it’s the track, the rollers, the hinges, or the operator fighting against a structural issue.
- Your opener hums but nothing moves. That hum is a motor trying to turn a gear that isn’t engaging, a seized bearing, or a capacitor on its last legs. Running it in that state burns out the motor, and a full operator swap is more expensive than an early bearing replacement.
- You’re opening the gate by hand because the automatic stopped responding. If you’re using the manual release every day, the operator has already failed, you’ve just adapted to it. The faster it gets diagnosed, the cheaper the fix, because failed boards don’t heal themselves.
- Wood or metal shows signs of rot, rust, or visible sag. A gate that drags on the driveway or leans at the hinge post is telling you the structure is failing. Operators mounted on a failing gate fail faster, so the gate itself needs correction before the automation gets blamed.
Our Process, Step by Step
- 1
Call and site measure. We come to your Hollywood property, measure the opening, check the grade and setback, and talk through what kind of gate and operator fit. This first visit is free and comes with no obligation.
- 2
Written quote and scope. You get a line-item price for the gate, the operator, the power run, and any access control. The number is agreed before any work starts, so there’s no invoice surprise at the end.
- 3
Fabrication or ordering. For custom gates we build to your measured dimensions in our shop. For stock panels and operators we order from our known suppliers with the right specs already dialed in.
- 4
Installation day. Posts get set and cured, the gate gets hung and aligned, the operator mounted and wired, and safety sensors tested. We run the gate through full open and close cycles and adjust until it runs smooth.
- 5
Walkthrough and handoff. We program every remote and keypad, show you the manual release, and answer any questions. Everything works before we leave, and you know exactly what was installed and why.
How Much Does Gate Installation Cost in Hollywood?
Gate installation in Hollywood typically runs anywhere from $1,800 to $8,000 for most residential jobs, with the range depending on whether the gate is manual or automated, a stock panel or custom fabricated, and swing versus slide. A manual aluminum driveway gate with standard posts might land near the bottom of that range, while an automated dual swing gate with access control, a power run, and custom fabrication can push past $8,000. The operator itself typically accounts for $800 to $2,500 of the total depending on the brand and capacity, and the electrical run adds another $500 to $1,500 on average for Hollywood lots.
What moves the price: the gate weight and width, the operator brand and duty cycle, the need for a track bed on a slide gate, and whether we’re retrofitting an existing gate or starting fresh. The way to avoid overpaying is to get a written, line-item quote and to choose an installer who services multiple brands, because a single-brand tech will spec what they stock even if a lighter unit from another brand does the job. Hacienda Gate Repair provides free estimates with no obligation, and every scope is priced and agreed before work begins.
Our Service Area Near Hollywood
Hacienda Gate Repair installs gates across Hollywood and the surrounding South Broward communities, including Gate Installation in Hallandale Beach, Gate Installation in West Hollywood, Pembroke Park, Dania Beach, Carver Ranches, Lake Forest, West Park, Ives Estates, Aventura, Ojus, and Sunny Isles Beach. We schedule by neighborhood and route our crews to minimize wait times, so your measure and install happen on a predictable timeline. Reach us at (855) 362-1433 to book a free site visit.
Serving Hollywood, FL — Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Hollywood
Gate installation is the complete process of putting a new gate across a driveway or entry opening: measuring the site, setting and curing posts, hanging the gate panel, and if it’s automated, mounting and wiring the operator and safety systems. Hacienda Gate Repair handles the entire scope in Hollywood from home visit to final walkthrough. One call covers the gate and the operator.
Most residential gate installations in Hollywood take two to four days from start to finish, including concrete curing time for the posts. Custom fabrication adds a few days to a week for the gate to be built in our shop. We give you a realistic timeline in the written quote rather than an optimistic guess.
Residential gate installation in Hollywood typically runs $1,800 to $8,000 depending on the gate type, operator brand, power-run distance, and whether the gate is custom fabricated or a stock panel. Automated gates cost more than manual ones, and slide gates cost more than swing gates on average. Call (855) 362-1433 for a free, line-item estimate at your property.
Yes, Hacienda Gate Repair services LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the residential and light-commercial operators you’re most likely to encounter in Hollywood. We work on your brand and size the right unit for your gate rather than pushing a stock favorite.
Gate installation is scheduled work that involves measuring, ordering, fabrication, and concrete curing, so we don’t install on a same-day emergency basis. If a gate failure has left your property unsecured, call us at (855) 362-1433 and we can discuss repair and temporary securing options. Emergency repair is a different scope than installation, and we do handle urgent repair calls.
Your warranty depends on the hardware we install: the gate panel and our fabrication work come with our own coverage, while operator warranties are provided by the manufacturer and registered in your name. We walk you through the warranty paperwork at the handoff and handle any claim that comes up. The details are spelled out in your quote so there’s no ambiguity later.
Clear the area around the gate opening: move vehicles off the driveway, cut back any landscaping that blocks the posts or the work zone, and let us know about any irrigation lines or invisible dog fence wires near the opening. We’ll mark the dig locations before any excavation starts. If you have an access code or gate remote for the community, have it ready so we can test entry and exit during the job.
Schedule Your Gate Installation Service in Hollywood Today
If your Hollywood gate is sagging, stuck, or you’re ready for a new automated entry, call Hacienda Gate Repair at (855) 362-1433 for a free site measure and written estimate. We show up, size the job honestly, and quote a number you can plan around before any work starts. Roland Vega and the crew are ready to get your gate built, hung, and working.
Written by Roland Vega, Owner at Hacienda Gate Repair, serving Hollywood, FL.